ok
Mini Shell
"""WebSocket protocol versions 13 and 8."""
import asyncio
import functools
import json
import random
import re
import sys
import zlib
from enum import IntEnum
from struct import Struct
from typing import (
Any,
Callable,
Final,
List,
NamedTuple,
Optional,
Pattern,
Set,
Tuple,
Union,
cast,
)
from .base_protocol import BaseProtocol
from .compression_utils import ZLibCompressor, ZLibDecompressor
from .helpers import NO_EXTENSIONS
from .streams import DataQueue
__all__ = (
"WS_CLOSED_MESSAGE",
"WS_CLOSING_MESSAGE",
"WS_KEY",
"WebSocketReader",
"WebSocketWriter",
"WSMessage",
"WebSocketError",
"WSMsgType",
"WSCloseCode",
)
class WSCloseCode(IntEnum):
OK = 1000
GOING_AWAY = 1001
PROTOCOL_ERROR = 1002
UNSUPPORTED_DATA = 1003
ABNORMAL_CLOSURE = 1006
INVALID_TEXT = 1007
POLICY_VIOLATION = 1008
MESSAGE_TOO_BIG = 1009
MANDATORY_EXTENSION = 1010
INTERNAL_ERROR = 1011
SERVICE_RESTART = 1012
TRY_AGAIN_LATER = 1013
BAD_GATEWAY = 1014
ALLOWED_CLOSE_CODES: Final[Set[int]] = {int(i) for i in WSCloseCode}
# For websockets, keeping latency low is extremely important as implementations
# generally expect to be able to send and receive messages quickly. We use a
# larger chunk size than the default to reduce the number of executor calls
# since the executor is a significant source of latency and overhead when
# the chunks are small. A size of 5KiB was chosen because it is also the
# same value python-zlib-ng choose to use as the threshold to release the GIL.
WEBSOCKET_MAX_SYNC_CHUNK_SIZE = 5 * 1024
class WSMsgType(IntEnum):
# websocket spec types
CONTINUATION = 0x0
TEXT = 0x1
BINARY = 0x2
PING = 0x9
PONG = 0xA
CLOSE = 0x8
# aiohttp specific types
CLOSING = 0x100
CLOSED = 0x101
ERROR = 0x102
text = TEXT
binary = BINARY
ping = PING
pong = PONG
close = CLOSE
closing = CLOSING
closed = CLOSED
error = ERROR
WS_KEY: Final[bytes] = b"258EAFA5-E914-47DA-95CA-C5AB0DC85B11"
UNPACK_LEN2 = Struct("!H").unpack_from
UNPACK_LEN3 = Struct("!Q").unpack_from
UNPACK_CLOSE_CODE = Struct("!H").unpack
PACK_LEN1 = Struct("!BB").pack
PACK_LEN2 = Struct("!BBH").pack
PACK_LEN3 = Struct("!BBQ").pack
PACK_CLOSE_CODE = Struct("!H").pack
MSG_SIZE: Final[int] = 2**14
DEFAULT_LIMIT: Final[int] = 2**16
class WSMessage(NamedTuple):
type: WSMsgType
# To type correctly, this would need some kind of tagged union for each type.
data: Any
extra: Optional[str]
def json(self, *, loads: Callable[[Any], Any] = json.loads) -> Any:
"""Return parsed JSON data.
.. versionadded:: 0.22
"""
return loads(self.data)
WS_CLOSED_MESSAGE = WSMessage(WSMsgType.CLOSED, None, None)
WS_CLOSING_MESSAGE = WSMessage(WSMsgType.CLOSING, None, None)
class WebSocketError(Exception):
"""WebSocket protocol parser error."""
def __init__(self, code: int, message: str) -> None:
self.code = code
super().__init__(code, message)
def __str__(self) -> str:
return cast(str, self.args[1])
class WSHandshakeError(Exception):
"""WebSocket protocol handshake error."""
native_byteorder: Final[str] = sys.byteorder
# Used by _websocket_mask_python
@functools.lru_cache
def _xor_table() -> List[bytes]:
return [bytes(a ^ b for a in range(256)) for b in range(256)]
def _websocket_mask_python(mask: bytes, data: bytearray) -> None:
"""Websocket masking function.
`mask` is a `bytes` object of length 4; `data` is a `bytearray`
object of any length. The contents of `data` are masked with `mask`,
as specified in section 5.3 of RFC 6455.
Note that this function mutates the `data` argument.
This pure-python implementation may be replaced by an optimized
version when available.
"""
assert isinstance(data, bytearray), data
assert len(mask) == 4, mask
if data:
_XOR_TABLE = _xor_table()
a, b, c, d = (_XOR_TABLE[n] for n in mask)
data[::4] = data[::4].translate(a)
data[1::4] = data[1::4].translate(b)
data[2::4] = data[2::4].translate(c)
data[3::4] = data[3::4].translate(d)
if NO_EXTENSIONS: # pragma: no cover
_websocket_mask = _websocket_mask_python
else:
try:
from ._websocket import _websocket_mask_cython # type: ignore[import-not-found]
_websocket_mask = _websocket_mask_cython
except ImportError: # pragma: no cover
_websocket_mask = _websocket_mask_python
_WS_DEFLATE_TRAILING: Final[bytes] = bytes([0x00, 0x00, 0xFF, 0xFF])
_WS_EXT_RE: Final[Pattern[str]] = re.compile(
r"^(?:;\s*(?:"
r"(server_no_context_takeover)|"
r"(client_no_context_takeover)|"
r"(server_max_window_bits(?:=(\d+))?)|"
r"(client_max_window_bits(?:=(\d+))?)))*$"
)
_WS_EXT_RE_SPLIT: Final[Pattern[str]] = re.compile(r"permessage-deflate([^,]+)?")
def ws_ext_parse(extstr: Optional[str], isserver: bool = False) -> Tuple[int, bool]:
if not extstr:
return 0, False
compress = 0
notakeover = False
for ext in _WS_EXT_RE_SPLIT.finditer(extstr):
defext = ext.group(1)
# Return compress = 15 when get `permessage-deflate`
if not defext:
compress = 15
break
match = _WS_EXT_RE.match(defext)
if match:
compress = 15
if isserver:
# Server never fail to detect compress handshake.
# Server does not need to send max wbit to client
if match.group(4):
compress = int(match.group(4))
# Group3 must match if group4 matches
# Compress wbit 8 does not support in zlib
# If compress level not support,
# CONTINUE to next extension
if compress > 15 or compress < 9:
compress = 0
continue
if match.group(1):
notakeover = True
# Ignore regex group 5 & 6 for client_max_window_bits
break
else:
if match.group(6):
compress = int(match.group(6))
# Group5 must match if group6 matches
# Compress wbit 8 does not support in zlib
# If compress level not support,
# FAIL the parse progress
if compress > 15 or compress < 9:
raise WSHandshakeError("Invalid window size")
if match.group(2):
notakeover = True
# Ignore regex group 5 & 6 for client_max_window_bits
break
# Return Fail if client side and not match
elif not isserver:
raise WSHandshakeError("Extension for deflate not supported" + ext.group(1))
return compress, notakeover
def ws_ext_gen(
compress: int = 15, isserver: bool = False, server_notakeover: bool = False
) -> str:
# client_notakeover=False not used for server
# compress wbit 8 does not support in zlib
if compress < 9 or compress > 15:
raise ValueError(
"Compress wbits must between 9 and 15, " "zlib does not support wbits=8"
)
enabledext = ["permessage-deflate"]
if not isserver:
enabledext.append("client_max_window_bits")
if compress < 15:
enabledext.append("server_max_window_bits=" + str(compress))
if server_notakeover:
enabledext.append("server_no_context_takeover")
# if client_notakeover:
# enabledext.append('client_no_context_takeover')
return "; ".join(enabledext)
class WSParserState(IntEnum):
READ_HEADER = 1
READ_PAYLOAD_LENGTH = 2
READ_PAYLOAD_MASK = 3
READ_PAYLOAD = 4
class WebSocketReader:
def __init__(
self, queue: DataQueue[WSMessage], max_msg_size: int, compress: bool = True
) -> None:
self.queue = queue
self._max_msg_size = max_msg_size
self._exc: Optional[BaseException] = None
self._partial = bytearray()
self._state = WSParserState.READ_HEADER
self._opcode: Optional[int] = None
self._frame_fin = False
self._frame_opcode: Optional[int] = None
self._frame_payload = bytearray()
self._tail = b""
self._has_mask = False
self._frame_mask: Optional[bytes] = None
self._payload_length = 0
self._payload_length_flag = 0
self._compressed: Optional[bool] = None
self._decompressobj: Optional[ZLibDecompressor] = None
self._compress = compress
def feed_eof(self) -> None:
self.queue.feed_eof()
def feed_data(self, data: bytes) -> Tuple[bool, bytes]:
if self._exc:
return True, data
try:
return self._feed_data(data)
except Exception as exc:
self._exc = exc
self.queue.set_exception(exc)
return True, b""
def _feed_data(self, data: bytes) -> Tuple[bool, bytes]:
for fin, opcode, payload, compressed in self.parse_frame(data):
if compressed and not self._decompressobj:
self._decompressobj = ZLibDecompressor(suppress_deflate_header=True)
if opcode == WSMsgType.CLOSE:
if len(payload) >= 2:
close_code = UNPACK_CLOSE_CODE(payload[:2])[0]
if close_code < 3000 and close_code not in ALLOWED_CLOSE_CODES:
raise WebSocketError(
WSCloseCode.PROTOCOL_ERROR,
f"Invalid close code: {close_code}",
)
try:
close_message = payload[2:].decode("utf-8")
except UnicodeDecodeError as exc:
raise WebSocketError(
WSCloseCode.INVALID_TEXT, "Invalid UTF-8 text message"
) from exc
msg = WSMessage(WSMsgType.CLOSE, close_code, close_message)
elif payload:
raise WebSocketError(
WSCloseCode.PROTOCOL_ERROR,
f"Invalid close frame: {fin} {opcode} {payload!r}",
)
else:
msg = WSMessage(WSMsgType.CLOSE, 0, "")
self.queue.feed_data(msg, 0)
elif opcode == WSMsgType.PING:
self.queue.feed_data(
WSMessage(WSMsgType.PING, payload, ""), len(payload)
)
elif opcode == WSMsgType.PONG:
self.queue.feed_data(
WSMessage(WSMsgType.PONG, payload, ""), len(payload)
)
elif (
opcode not in (WSMsgType.TEXT, WSMsgType.BINARY)
and self._opcode is None
):
raise WebSocketError(
WSCloseCode.PROTOCOL_ERROR, f"Unexpected opcode={opcode!r}"
)
else:
# load text/binary
if not fin:
# got partial frame payload
if opcode != WSMsgType.CONTINUATION:
self._opcode = opcode
self._partial.extend(payload)
if self._max_msg_size and len(self._partial) >= self._max_msg_size:
raise WebSocketError(
WSCloseCode.MESSAGE_TOO_BIG,
"Message size {} exceeds limit {}".format(
len(self._partial), self._max_msg_size
),
)
else:
# previous frame was non finished
# we should get continuation opcode
if self._partial:
if opcode != WSMsgType.CONTINUATION:
raise WebSocketError(
WSCloseCode.PROTOCOL_ERROR,
"The opcode in non-fin frame is expected "
"to be zero, got {!r}".format(opcode),
)
if opcode == WSMsgType.CONTINUATION:
assert self._opcode is not None
opcode = self._opcode
self._opcode = None
self._partial.extend(payload)
if self._max_msg_size and len(self._partial) >= self._max_msg_size:
raise WebSocketError(
WSCloseCode.MESSAGE_TOO_BIG,
"Message size {} exceeds limit {}".format(
len(self._partial), self._max_msg_size
),
)
# Decompress process must to be done after all packets
# received.
if compressed:
assert self._decompressobj is not None
self._partial.extend(_WS_DEFLATE_TRAILING)
payload_merged = self._decompressobj.decompress_sync(
self._partial, self._max_msg_size
)
if self._decompressobj.unconsumed_tail:
left = len(self._decompressobj.unconsumed_tail)
raise WebSocketError(
WSCloseCode.MESSAGE_TOO_BIG,
"Decompressed message size {} exceeds limit {}".format(
self._max_msg_size + left, self._max_msg_size
),
)
else:
payload_merged = bytes(self._partial)
self._partial.clear()
if opcode == WSMsgType.TEXT:
try:
text = payload_merged.decode("utf-8")
self.queue.feed_data(
WSMessage(WSMsgType.TEXT, text, ""), len(text)
)
except UnicodeDecodeError as exc:
raise WebSocketError(
WSCloseCode.INVALID_TEXT, "Invalid UTF-8 text message"
) from exc
else:
self.queue.feed_data(
WSMessage(WSMsgType.BINARY, payload_merged, ""),
len(payload_merged),
)
return False, b""
def parse_frame(
self, buf: bytes
) -> List[Tuple[bool, Optional[int], bytearray, Optional[bool]]]:
"""Return the next frame from the socket."""
frames = []
if self._tail:
buf, self._tail = self._tail + buf, b""
start_pos = 0
buf_length = len(buf)
while True:
# read header
if self._state == WSParserState.READ_HEADER:
if buf_length - start_pos >= 2:
data = buf[start_pos : start_pos + 2]
start_pos += 2
first_byte, second_byte = data
fin = (first_byte >> 7) & 1
rsv1 = (first_byte >> 6) & 1
rsv2 = (first_byte >> 5) & 1
rsv3 = (first_byte >> 4) & 1
opcode = first_byte & 0xF
# frame-fin = %x0 ; more frames of this message follow
# / %x1 ; final frame of this message
# frame-rsv1 = %x0 ;
# 1 bit, MUST be 0 unless negotiated otherwise
# frame-rsv2 = %x0 ;
# 1 bit, MUST be 0 unless negotiated otherwise
# frame-rsv3 = %x0 ;
# 1 bit, MUST be 0 unless negotiated otherwise
#
# Remove rsv1 from this test for deflate development
if rsv2 or rsv3 or (rsv1 and not self._compress):
raise WebSocketError(
WSCloseCode.PROTOCOL_ERROR,
"Received frame with non-zero reserved bits",
)
if opcode > 0x7 and fin == 0:
raise WebSocketError(
WSCloseCode.PROTOCOL_ERROR,
"Received fragmented control frame",
)
has_mask = (second_byte >> 7) & 1
length = second_byte & 0x7F
# Control frames MUST have a payload
# length of 125 bytes or less
if opcode > 0x7 and length > 125:
raise WebSocketError(
WSCloseCode.PROTOCOL_ERROR,
"Control frame payload cannot be " "larger than 125 bytes",
)
# Set compress status if last package is FIN
# OR set compress status if this is first fragment
# Raise error if not first fragment with rsv1 = 0x1
if self._frame_fin or self._compressed is None:
self._compressed = True if rsv1 else False
elif rsv1:
raise WebSocketError(
WSCloseCode.PROTOCOL_ERROR,
"Received frame with non-zero reserved bits",
)
self._frame_fin = bool(fin)
self._frame_opcode = opcode
self._has_mask = bool(has_mask)
self._payload_length_flag = length
self._state = WSParserState.READ_PAYLOAD_LENGTH
else:
break
# read payload length
if self._state == WSParserState.READ_PAYLOAD_LENGTH:
length = self._payload_length_flag
if length == 126:
if buf_length - start_pos >= 2:
data = buf[start_pos : start_pos + 2]
start_pos += 2
length = UNPACK_LEN2(data)[0]
self._payload_length = length
self._state = (
WSParserState.READ_PAYLOAD_MASK
if self._has_mask
else WSParserState.READ_PAYLOAD
)
else:
break
elif length > 126:
if buf_length - start_pos >= 8:
data = buf[start_pos : start_pos + 8]
start_pos += 8
length = UNPACK_LEN3(data)[0]
self._payload_length = length
self._state = (
WSParserState.READ_PAYLOAD_MASK
if self._has_mask
else WSParserState.READ_PAYLOAD
)
else:
break
else:
self._payload_length = length
self._state = (
WSParserState.READ_PAYLOAD_MASK
if self._has_mask
else WSParserState.READ_PAYLOAD
)
# read payload mask
if self._state == WSParserState.READ_PAYLOAD_MASK:
if buf_length - start_pos >= 4:
self._frame_mask = buf[start_pos : start_pos + 4]
start_pos += 4
self._state = WSParserState.READ_PAYLOAD
else:
break
if self._state == WSParserState.READ_PAYLOAD:
length = self._payload_length
payload = self._frame_payload
chunk_len = buf_length - start_pos
if length >= chunk_len:
self._payload_length = length - chunk_len
payload.extend(buf[start_pos:])
start_pos = buf_length
else:
self._payload_length = 0
payload.extend(buf[start_pos : start_pos + length])
start_pos = start_pos + length
if self._payload_length == 0:
if self._has_mask:
assert self._frame_mask is not None
_websocket_mask(self._frame_mask, payload)
frames.append(
(self._frame_fin, self._frame_opcode, payload, self._compressed)
)
self._frame_payload = bytearray()
self._state = WSParserState.READ_HEADER
else:
break
self._tail = buf[start_pos:]
return frames
class WebSocketWriter:
def __init__(
self,
protocol: BaseProtocol,
transport: asyncio.Transport,
*,
use_mask: bool = False,
limit: int = DEFAULT_LIMIT,
random: random.Random = random.Random(),
compress: int = 0,
notakeover: bool = False,
) -> None:
self.protocol = protocol
self.transport = transport
self.use_mask = use_mask
self.randrange = random.randrange
self.compress = compress
self.notakeover = notakeover
self._closing = False
self._limit = limit
self._output_size = 0
self._compressobj: Any = None # actually compressobj
async def _send_frame(
self, message: bytes, opcode: int, compress: Optional[int] = None
) -> None:
"""Send a frame over the websocket with message as its payload."""
if self._closing and not (opcode & WSMsgType.CLOSE):
raise ConnectionResetError("Cannot write to closing transport")
rsv = 0
# Only compress larger packets (disabled)
# Does small packet needs to be compressed?
# if self.compress and opcode < 8 and len(message) > 124:
if (compress or self.compress) and opcode < 8:
if compress:
# Do not set self._compress if compressing is for this frame
compressobj = self._make_compress_obj(compress)
else: # self.compress
if not self._compressobj:
self._compressobj = self._make_compress_obj(self.compress)
compressobj = self._compressobj
message = await compressobj.compress(message)
# Its critical that we do not return control to the event
# loop until we have finished sending all the compressed
# data. Otherwise we could end up mixing compressed frames
# if there are multiple coroutines compressing data.
message += compressobj.flush(
zlib.Z_FULL_FLUSH if self.notakeover else zlib.Z_SYNC_FLUSH
)
if message.endswith(_WS_DEFLATE_TRAILING):
message = message[:-4]
rsv = rsv | 0x40
msg_length = len(message)
use_mask = self.use_mask
if use_mask:
mask_bit = 0x80
else:
mask_bit = 0
if msg_length < 126:
header = PACK_LEN1(0x80 | rsv | opcode, msg_length | mask_bit)
elif msg_length < (1 << 16):
header = PACK_LEN2(0x80 | rsv | opcode, 126 | mask_bit, msg_length)
else:
header = PACK_LEN3(0x80 | rsv | opcode, 127 | mask_bit, msg_length)
if use_mask:
mask_int = self.randrange(0, 0xFFFFFFFF)
mask = mask_int.to_bytes(4, "big")
message = bytearray(message)
_websocket_mask(mask, message)
self._write(header + mask + message)
self._output_size += len(header) + len(mask) + msg_length
else:
if msg_length > MSG_SIZE:
self._write(header)
self._write(message)
else:
self._write(header + message)
self._output_size += len(header) + msg_length
# It is safe to return control to the event loop when using compression
# after this point as we have already sent or buffered all the data.
if self._output_size > self._limit:
self._output_size = 0
await self.protocol._drain_helper()
def _make_compress_obj(self, compress: int) -> ZLibCompressor:
return ZLibCompressor(
level=zlib.Z_BEST_SPEED,
wbits=-compress,
max_sync_chunk_size=WEBSOCKET_MAX_SYNC_CHUNK_SIZE,
)
def _write(self, data: bytes) -> None:
if self.transport is None or self.transport.is_closing():
raise ConnectionResetError("Cannot write to closing transport")
self.transport.write(data)
async def pong(self, message: Union[bytes, str] = b"") -> None:
"""Send pong message."""
if isinstance(message, str):
message = message.encode("utf-8")
await self._send_frame(message, WSMsgType.PONG)
async def ping(self, message: Union[bytes, str] = b"") -> None:
"""Send ping message."""
if isinstance(message, str):
message = message.encode("utf-8")
await self._send_frame(message, WSMsgType.PING)
async def send(
self,
message: Union[str, bytes],
binary: bool = False,
compress: Optional[int] = None,
) -> None:
"""Send a frame over the websocket with message as its payload."""
if isinstance(message, str):
message = message.encode("utf-8")
if binary:
await self._send_frame(message, WSMsgType.BINARY, compress)
else:
await self._send_frame(message, WSMsgType.TEXT, compress)
async def close(self, code: int = 1000, message: Union[bytes, str] = b"") -> None:
"""Close the websocket, sending the specified code and message."""
if isinstance(message, str):
message = message.encode("utf-8")
try:
await self._send_frame(
PACK_CLOSE_CODE(code) + message, opcode=WSMsgType.CLOSE
)
finally:
self._closing = True
Zerion Mini Shell 1.0