Current File : //proc/thread-self/root/lib/dracut/modules.d/99kdumpbase/module-setup.sh
#!/bin/bash
_save_kdump_netifs() {
local _name
if [[ -n $2 ]]; then
_name=$2
else
_name=$1
fi
unique_netifs[$1]=$_name
}
_get_kdump_netifs() {
echo -n "${!unique_netifs[@]}"
}
kdump_module_init() {
if ! [[ -d "${initdir}/tmp" ]]; then
mkdir -p "${initdir}/tmp"
fi
. /lib/kdump/kdump-lib.sh
}
check() {
[[ $debug ]] && set -x
#kdumpctl sets this explicitly
if [ -z "$IN_KDUMP" ] || [ ! -f /etc/kdump.conf ]
then
return 1
fi
return 0
}
depends() {
local _dep="base shutdown"
kdump_module_init
add_opt_module() {
[[ " $omit_dracutmodules " != *\ $1\ * ]] && _dep="$_dep $1"
}
if is_squash_available; then
add_opt_module squash
else
dwarning "Required modules to build a squashed kdump image is missing!"
fi
add_opt_module watchdog-modules
if is_wdt_active; then
add_opt_module watchdog
fi
if is_ssh_dump_target; then
_dep="$_dep ssh-client"
fi
if is_lvm2_thinp_dump_target; then
if grep -q lvmthinpool-monitor <<< $(dracut --list-modules); then
add_opt_module lvmthinpool-monitor
else
dwarning "Required lvmthinpool-monitor modules is missing! Please upgrade dracut >= 057."
fi
fi
if [ "$(uname -m)" = "s390x" ]; then
_dep="$_dep znet"
fi
if [ -n "$( find /sys/devices -name drm )" ] || [ -d /sys/module/hyperv_fb ]; then
add_opt_module drm
fi
if is_generic_fence_kdump || is_pcs_fence_kdump; then
_dep="$_dep network"
fi
echo $_dep
}
kdump_is_bridge() {
[ -d /sys/class/net/"$1"/bridge ]
}
kdump_is_bond() {
[ -d /sys/class/net/"$1"/bonding ]
}
kdump_is_team() {
[ -f /usr/bin/teamnl ] && teamnl $1 ports &> /dev/null
}
kdump_is_vlan() {
[ -f /proc/net/vlan/"$1" ]
}
# $1: netdev name
source_ifcfg_file() {
local ifcfg_file
ifcfg_file=$(get_ifcfg_filename $1)
if [ -f "${ifcfg_file}" ]; then
. ${ifcfg_file}
else
dwarning "The ifcfg file of $1 is not found!"
fi
}
add_dns_netdev() {
local _server _route
_server=$1
_route=`/sbin/ip -o route get to $_server 2>&1`
[ $? != 0 ] && echo "DNS server $_server unreachable"
_netdev=$(get_ip_route_field "$_route" "dev")
_save_kdump_netifs "$_netdev" "$(kdump_setup_ifname $_netdev)"
}
# $1: netdev name
kdump_setup_dns() {
local _nameserver _dns
local _dnsfile=${initdir}/etc/cmdline.d/42dns.conf
source_ifcfg_file $1
[ -n "$DNS1" ] && echo "nameserver=$DNS1" > "$_dnsfile" && add_dns_netdev "$DNS1"
[ -n "$DNS2" ] && echo "nameserver=$DNS2" >> "$_dnsfile" && add_dns_netdev "$DNS2"
while read content;
do
_nameserver=$(echo $content | grep ^nameserver)
[ -z "$_nameserver" ] && continue
_dns=$(echo $_nameserver | cut -d' ' -f2)
[ -z "$_dns" ] && continue
if [ ! -f $_dnsfile ] || [ ! $(cat $_dnsfile | grep -q $_dns) ]; then
echo "nameserver=$_dns" >> "$_dnsfile"
add_dns_netdev "$_dns"
fi
done < "/etc/resolv.conf"
}
# $1: repeat times
# $2: string to be repeated
# $3: separator
repeatedly_join_str() {
local _count="$1"
local _str="$2"
local _separator="$3"
local i _res
if [[ "$_count" -le 0 ]]; then
echo -n ""
return
fi
i=0
_res="$_str"
((_count--))
while [[ "$i" -lt "$_count" ]]; do
((i++))
_res="${_res}${_separator}${_str}"
done
echo -n "$_res"
}
# $1: prefix
# $2: ipv6_flag="-6" indicates it's IPv6
# Given a prefix, calculate the netmask (equivalent of "ipcalc -m")
# by concatenating three parts,
# 1) the groups with all bits set 1
# 2) a group with partial bits set to 0
# 3) the groups with all bits set to 0
cal_netmask_by_prefix() {
local _prefix="$1"
local _ipv6_flag="$2" _ipv6
local _bits_per_octet=8
local _count _res _octets_per_group _octets_total _seperator _total_groups
local _max_group_value _max_group_value_repr _bits_per_group _tmp _zero_bits
if [[ "$_ipv6_flag" == "-6" ]]; then
_ipv6=1
else
_ipv6=0
fi
if [[ "$_prefix" -lt 0 || "$_prefix" -gt 128 ]] || \
( ((!_ipv6)) && [[ "$_prefix" -gt 32 ]] ); then
derror "Bad prefix:$_prefix for calculating netmask"
exit 1
fi
if ((_ipv6)); then
_octets_per_group=2
_octets_total=16
_seperator=":"
else
_octets_per_group=1
_octets_total=4
_seperator="."
fi
_total_groups=$((_octets_total/_octets_per_group))
_bits_per_group=$((_octets_per_group * _bits_per_octet))
_max_group_value=$(((1 << _bits_per_group) - 1))
if ((_ipv6)); then
_max_group_value_repr=$(printf "%x" $_max_group_value)
else
_max_group_value_repr="$_max_group_value"
fi
_count=$((_prefix/_octets_per_group/_bits_per_octet))
_first_part=$(repeatedly_join_str "$_count" "$_max_group_value_repr" "$_seperator")
_res="$_first_part"
_tmp=$((_octets_total*_bits_per_octet-_prefix))
_zero_bits=$(expr $_tmp % $_bits_per_group)
if [[ "$_zero_bits" -ne 0 ]]; then
_second_part=$((_max_group_value >> _zero_bits << _zero_bits))
if ((_ipv6)); then
_second_part=$(printf "%x" $_second_part)
fi
((_count++))
if [[ -z "$_first_part" ]]; then
_res="$_second_part"
else
_res="${_first_part}${_seperator}${_second_part}"
fi
fi
_count=$((_total_groups-_count))
if [[ "$_count" -eq 0 ]]; then
echo -n "$_res"
return
fi
if ((_ipv6)) && [[ "$_count" -gt 1 ]] ; then
# use condensed notion for IPv6
_third_part=":"
else
_third_part=$(repeatedly_join_str "$_count" "0" "$_seperator")
fi
if [[ -z "$_res" ]] && ((!_ipv6)) ; then
echo -n "${_third_part}"
else
echo -n "${_res}${_seperator}${_third_part}"
fi
}
#$1: netdev name
#$2: srcaddr
#if it use static ip echo it, or echo null
kdump_static_ip() {
local _netdev="$1" _srcaddr="$2" kdumpnic="$3" _ipv6_flag
local _netmask _gateway _ipaddr _target _nexthop _prefix
_ipaddr=$(ip addr show dev $_netdev permanent | awk "/ $_srcaddr\/.* /{print \$2}")
if is_ipv6_address $_srcaddr; then
_ipv6_flag="-6"
fi
if [ -n "$_ipaddr" ]; then
_gateway=$(ip $_ipv6_flag route list dev $_netdev | \
awk '/^default /{print $3}' | head -n 1)
if [ "x" != "x"$_ipv6_flag ]; then
# _ipaddr="2002::56ff:feb6:56d5/64", _netmask is the number after "/"
_netmask=${_ipaddr#*\/}
_srcaddr="[$_srcaddr]"
_gateway="[$_gateway]"
else
_prefix=$(cut -d'/' -f2 <<< "$_ipaddr")
_netmask=$(cal_netmask_by_prefix "$_prefix" "$_ipv6_flag")
if [[ "$?" -ne 0 ]]; then
derror "Failed to calculate netmask for $_ipaddr"
exit 1
fi
fi
echo -n "${_srcaddr}::${_gateway}:${_netmask}::"
fi
/sbin/ip $_ipv6_flag route show | grep -v default | grep ".*via.* $_netdev " |\
while read _route; do
_target=`echo $_route | cut -d ' ' -f1`
_nexthop=`echo $_route | cut -d ' ' -f3`
if [ "x" != "x"$_ipv6_flag ]; then
_target="[$_target]"
_nexthop="[$_nexthop]"
fi
echo "rd.route=$_target:$_nexthop:$kdumpnic"
done >> ${initdir}/etc/cmdline.d/45route-static.conf
}
kdump_get_mac_addr() {
cat /sys/class/net/$1/address
}
#Bonding or team master modifies the mac address
#of its slaves, we should use perm address
kdump_get_perm_addr() {
local addr=$(ethtool -P $1 | sed -e 's/Permanent address: //')
if [ -z "$addr" ] || [ "$addr" = "00:00:00:00:00:00" ]
then
derror "Can't get the permanent address of $1"
else
echo "$addr"
fi
}
# Prefix kernel assigned names with "kdump-". EX: eth0 -> kdump-eth0
# Because kernel assigned names are not persistent between 1st and 2nd
# kernel. We could probably end up with eth0 being eth1, eth0 being
# eth1, and naming conflict happens.
kdump_setup_ifname() {
local _ifname
# If ifname already has 'kdump-' prefix, we must be switching from
# fadump to kdump. Skip prefixing 'kdump-' in this case as adding
# another prefix may truncate the ifname. Since an ifname with
# 'kdump-' is already persistent, this should be fine.
if [[ $1 =~ ^eth.* ]] && [[ ! $1 =~ ^kdump-* ]]; then
_ifname="kdump-$1"
else
_ifname="$1"
fi
echo "$_ifname"
}
kdump_install_nm_netif_allowlist() {
local _netif _except_netif _netif_allowlist _netif_allowlist_nm_conf
for _netif in $1; do
_per_mac=$(kdump_get_perm_addr "$_netif")
if [[ "$_per_mac" != 'not set' ]]; then
_except_netif="mac:$_per_mac"
else
_except_netif="interface-name:${unique_netifs[${_netif}]}"
fi
_netif_allowlist="${_netif_allowlist}except:${_except_netif};"
done
_netif_allowlist_nm_conf=${initdir}/tmp/netif_allowlist_nm_conf
cat << EOF > "$_netif_allowlist_nm_conf"
[device-others]
match-device=${_netif_allowlist}
managed=false
EOF
inst "$_netif_allowlist_nm_conf" "/etc/NetworkManager/conf.d/10-kdump-netif_allowlist.conf"
rm -f "$_netif_allowlist_nm_conf"
}
_get_nic_driver() {
ethtool -i "$1" | sed -n -E "s/driver: (.*)/\1/p"
}
_get_hpyerv_physical_driver() {
local _physical_nic
_physical_nic=$(find /sys/class/net/"$1"/ -name 'lower_*' | sed -En "s/\/.*lower_(.*)/\1/p")
[[ -n $_physical_nic ]] || return
_get_nic_driver "$_physical_nic"
}
kdump_install_nic_driver() {
local _netif _driver _drivers
_drivers=()
for _netif in $1; do
[[ $_netif == lo ]] && continue
_driver=$(_get_nic_driver "$_netif")
if [[ -z $_driver ]]; then
derror "Failed to get the driver of $_netif"
exit 1
fi
if [[ $_driver == "802.1Q VLAN Support" ]]; then
# ethtool somehow doesn't return the driver name for a VLAN NIC
_driver=8021q
elif [[ $_driver == "team" ]]; then
# install the team mode drivers like team_mode_roundrobin.ko as well
_driver='=drivers/net/team'
elif [[ $_driver == "hv_netvsc" ]]; then
# A Hyper-V VM may have accelerated networking
# https://learn.microsoft.com/en-us/azure/virtual-network/accelerated-networking-overview
# Install the driver of physical NIC as well
_drivers+=("$(_get_hpyerv_physical_driver "$_netif")")
fi
_drivers+=("$_driver")
done
[[ -n ${_drivers[*]} ]] || return
instmods "${_drivers[@]}"
}
kdump_setup_bridge() {
local _netdev=$1
local _brif _dev _mac _kdumpdev
for _dev in `ls /sys/class/net/$_netdev/brif/`; do
_kdumpdev=""
if kdump_is_bond "$_dev"; then
kdump_setup_bond "$_dev"
elif kdump_is_team "$_dev"; then
kdump_setup_team "$_dev"
elif kdump_is_vlan "$_dev"; then
kdump_setup_vlan "$_dev"
else
_mac=$(kdump_get_mac_addr $_dev)
_kdumpdev=$(kdump_setup_ifname $_dev)
echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/41bridge.conf
fi
_save_kdump_netifs "$_dev" "$_kdumpdev"
[[ -z $_kdumpdev ]] && _kdumpdev=$_dev
_brif+="$_kdumpdev,"
done
echo " bridge=$_netdev:$(echo $_brif | sed -e 's/,$//')" >> ${initdir}/etc/cmdline.d/41bridge.conf
}
kdump_setup_bond() {
local _netdev=$1
local _dev _mac _slaves _kdumpdev
for _dev in `cat /sys/class/net/$_netdev/bonding/slaves`; do
_mac=$(kdump_get_perm_addr $_dev)
_kdumpdev=$(kdump_setup_ifname $_dev)
_save_kdump_netifs "$_dev" "$_kdumpdev"
echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/42bond.conf
_slaves+="$_kdumpdev,"
done
echo -n " bond=$_netdev:$(echo $_slaves | sed 's/,$//')" >> ${initdir}/etc/cmdline.d/42bond.conf
# Get bond options specified in ifcfg
source_ifcfg_file $_netdev
bondoptions=":$(echo $BONDING_OPTS | xargs echo | tr " " ",")"
echo "$bondoptions" >> ${initdir}/etc/cmdline.d/42bond.conf
}
kdump_setup_team() {
local _netdev=$1
local _dev _mac _slaves _kdumpdev
for _dev in `teamnl $_netdev ports | awk -F':' '{print $2}'`; do
_mac=$(kdump_get_perm_addr $_dev)
_kdumpdev=$(kdump_setup_ifname $_dev)
_save_kdump_netifs "$_dev" "$_kdumpdev"
echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/44team.conf
_slaves+="$_kdumpdev,"
done
echo " team=$_netdev:$(echo $_slaves | sed -e 's/,$//')" >> ${initdir}/etc/cmdline.d/44team.conf
#Buggy version teamdctl outputs to stderr!
#Try to use the latest version of teamd.
teamdctl "$_netdev" config dump > ${initdir}/tmp/$$-$_netdev.conf
if [ $? -ne 0 ]
then
derror "teamdctl failed."
exit 1
fi
inst_dir /etc/teamd
inst_simple ${initdir}/tmp/$$-$_netdev.conf "/etc/teamd/$_netdev.conf"
rm -f ${initdir}/tmp/$$-$_netdev.conf
}
kdump_setup_vlan() {
local _netdev=$1
local _phydev="$(awk '/^Device:/{print $2}' /proc/net/vlan/"$_netdev")"
local _netmac="$(kdump_get_mac_addr $_phydev)"
local _kdumpdev
#Just support vlan over bond and team
if kdump_is_bridge "$_phydev"; then
derror "Vlan over bridge is not supported!"
exit 1
elif kdump_is_bond "$_phydev"; then
kdump_setup_bond "$_phydev"
echo " vlan=$(kdump_setup_ifname $_netdev):$_phydev" > ${initdir}/etc/cmdline.d/43vlan.conf
else
_kdumpdev="$(kdump_setup_ifname $_phydev)"
echo " vlan=$(kdump_setup_ifname $_netdev):$_kdumpdev ifname=$_kdumpdev:$_netmac" > ${initdir}/etc/cmdline.d/43vlan.conf
fi
_save_kdump_netifs "$_phydev" "$_kdumpdev"
}
# find online znet device
# return ifname (_netdev)
# code reaped from the list_configured function of
# https://github.com/hreinecke/s390-tools/blob/master/zconf/znetconf
find_online_znet_device() {
local CCWGROUPBUS_DEVICEDIR="/sys/bus/ccwgroup/devices"
local NETWORK_DEVICES d ifname ONLINE
[ ! -d "$CCWGROUPBUS_DEVICEDIR" ] && return
NETWORK_DEVICES=$(find $CCWGROUPBUS_DEVICEDIR)
for d in $NETWORK_DEVICES
do
[ ! -f "$d/online" ] && continue
read ONLINE < $d/online
if [ $ONLINE -ne 1 ]; then
continue
fi
# determine interface name, if there (only for qeth and if
# device is online)
if [ -f $d/if_name ]
then
read ifname < $d/if_name
elif [ -d $d/net ]
then
ifname=$(ls $d/net/)
fi
[ -n "$ifname" ] && break
done
echo -n "$ifname"
}
# setup s390 znet cmdline
# $1: netdev name
kdump_setup_znet() {
local _options=""
local _netdev=$1
source_ifcfg_file $_netdev
[[ -z "$NETTYPE" ]] && return
[[ -z "$SUBCHANNELS" ]] && return
for i in $OPTIONS; do
_options=${_options},$i
done
echo rd.znet=${NETTYPE},${SUBCHANNELS}${_options} rd.znet_ifname=$(kdump_setup_ifname $_netdev):${SUBCHANNELS} > ${initdir}/etc/cmdline.d/30znet.conf
}
_get_nic_driver() {
ethtool -i "$1" | sed -n -E "s/driver: (.*)/\1/p"
}
_rename_hypver_netdev() {
local _udev_rule_dir
_udev_rule_dir=${initdir}/etc/udev/rules.d
mkdir -p "$_udev_rule_dir"
printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="hv_netvsc", ATTR{address}=="%s", ATTR{type}=="1", NAME="%s"\n' "$2" "$1" > "${_udev_rule_dir}/80-hv_netvsc-ifname.rules"
}
# Setup dracut to bringup a given network interface
kdump_setup_netdev() {
local _netdev=$1 _srcaddr=$2
local _static _proto _ip_conf _ip_opts _ifname_opts kdumpnic
local _netmac=$(kdump_get_mac_addr $_netdev)
local _znet_netdev
kdumpnic=$(kdump_setup_ifname $_netdev)
_znet_netdev=$(find_online_znet_device)
if [[ -n "$_znet_netdev" ]]; then
$(kdump_setup_znet "$_znet_netdev")
if [[ $? != 0 ]]; then
derror "Failed to set up znet"
exit 1
fi
fi
_static=$(kdump_static_ip $_netdev $_srcaddr $kdumpnic)
if [ -n "$_static" ]; then
_proto=none
elif is_ipv6_address $_srcaddr; then
_proto=auto6
else
_proto=dhcp
fi
_ip_conf="${initdir}/etc/cmdline.d/40ip.conf"
_ip_opts=" ip=${_static}$kdumpnic:${_proto}"
# dracut doesn't allow duplicated configuration for same NIC, even they're exactly the same.
# so we have to avoid adding duplicates
# We should also check /proc/cmdline for existing ip=xx arg.
# For example, iscsi boot will specify ip=xxx arg in cmdline.
if [ ! -f $_ip_conf ] || ! grep -q $_ip_opts $_ip_conf &&\
! grep -q "ip=[^[:space:]]*$_netdev" /proc/cmdline; then
echo "$_ip_opts" >> $_ip_conf
fi
if kdump_is_bridge "$_netdev"; then
kdump_setup_bridge "$_netdev"
elif kdump_is_bond "$_netdev"; then
kdump_setup_bond "$_netdev"
elif kdump_is_team "$_netdev"; then
kdump_setup_team "$_netdev"
elif kdump_is_vlan "$_netdev"; then
kdump_setup_vlan "$_netdev"
else
if [[ $(_get_nic_driver "$1") != hv_netvsc ]]; then
_ifname_opts=" ifname=$kdumpnic:$_netmac"
echo "$_ifname_opts" >> $_ip_conf
else
_rename_hypver_netdev "$kdumpnic" "$_netmac"
fi
fi
_save_kdump_netifs "$_netdev" "$_kdumpdev"
kdump_setup_dns "$_netdev"
if [ ! -f ${initdir}/etc/cmdline.d/50neednet.conf ]; then
# network-manager module needs this parameter
echo "rd.neednet" >> ${initdir}/etc/cmdline.d/50neednet.conf
fi
}
get_ip_route_field()
{
if `echo $1 | grep -q $2`; then
echo ${1##*$2} | cut -d ' ' -f1
fi
}
#Function:kdump_install_net
#$1: config values of net line in kdump.conf
#$2: srcaddr of network device
kdump_install_net() {
local _server _netdev _srcaddr _route _serv_tmp
local config_val="$1"
_server=$(get_remote_host $config_val)
if is_hostname $_server; then
_serv_tmp=`getent ahosts $_server | grep -v : | head -n 1`
if [ -z "$_serv_tmp" ]; then
_serv_tmp=`getent ahosts $_server | head -n 1`
fi
_server=`echo $_serv_tmp | cut -d' ' -f1`
fi
_route=`/sbin/ip -o route get to $_server 2>&1`
[ $? != 0 ] && echo "Bad kdump location: $config_val" && exit 1
#the field in the ip output changes if we go to another subnet
_srcaddr=$(get_ip_route_field "$_route" "src")
_netdev=$(get_ip_route_field "$_route" "dev")
kdump_setup_netdev "${_netdev}" "${_srcaddr}"
#save netdev used for kdump as cmdline
# Whoever calling kdump_install_net() is setting up the default gateway,
# ie. bootdev/kdumpnic. So don't override the setting if calling
# kdump_install_net() for another time. For example, after setting eth0 as
# the default gate way for network dump, eth1 in the fence kdump path will
# call kdump_install_net again and we don't want eth1 to be the default
# gateway.
if [ ! -f ${initdir}/etc/cmdline.d/60kdumpnic.conf ] &&
[ ! -f ${initdir}/etc/cmdline.d/70bootdev.conf ]; then
echo "kdumpnic=$(kdump_setup_ifname $_netdev)" > ${initdir}/etc/cmdline.d/60kdumpnic.conf
echo "bootdev=$(kdump_setup_ifname $_netdev)" > ${initdir}/etc/cmdline.d/70bootdev.conf
fi
}
# install etc/kdump/pre.d and /etc/kdump/post.d
kdump_install_pre_post_conf() {
if [ -d /etc/kdump/pre.d ]; then
for file in /etc/kdump/pre.d/*; do
if [ -x "$file" ]; then
dracut_install $file
elif [ $file != "/etc/kdump/pre.d/*" ]; then
echo "$file is not executable"
fi
done
fi
if [ -d /etc/kdump/post.d ]; then
for file in /etc/kdump/post.d/*; do
if [ -x "$file" ]; then
dracut_install $file
elif [ $file != "/etc/kdump/post.d/*" ]; then
echo "$file is not executable"
fi
done
fi
}
default_dump_target_install_conf()
{
local _target _fstype
local _mntpoint _save_path
is_user_configured_dump_target && return
_save_path=$(get_bind_mount_source $(get_save_path))
_target=$(get_target_from_path $_save_path)
_mntpoint=$(get_mntpoint_from_target $_target)
_fstype=$(get_fs_type_from_target $_target)
if is_fs_type_nfs $_fstype; then
kdump_install_net "$_target"
_fstype="nfs"
else
_target=$(kdump_get_persistent_dev $_target)
fi
echo "$_fstype $_target" >> ${initdir}/tmp/$$-kdump.conf
# don't touch the path under root mount
if [ "$_mntpoint" != "/" ]; then
_save_path=${_save_path##"$_mntpoint"}
fi
#erase the old path line, then insert the parsed path
sed -i "/^path/d" ${initdir}/tmp/$$-kdump.conf
echo "path $_save_path" >> ${initdir}/tmp/$$-kdump.conf
}
#install kdump.conf and what user specifies in kdump.conf
kdump_install_conf() {
local _opt _val _pdev
sed -ne '/^#/!p' /etc/kdump.conf > ${initdir}/tmp/$$-kdump.conf
while read _opt _val;
do
# remove inline comments after the end of a directive.
case "$_opt" in
raw)
_pdev=$(persistent_policy="by-id" kdump_get_persistent_dev $_val)
sed -i -e "s#^$_opt[[:space:]]\+$_val#$_opt $_pdev#" ${initdir}/tmp/$$-kdump.conf
;;
ext[234]|xfs|btrfs|minix)
_pdev=$(kdump_get_persistent_dev $_val)
sed -i -e "s#^$_opt[[:space:]]\+$_val#$_opt $_pdev#" ${initdir}/tmp/$$-kdump.conf
;;
ssh|nfs)
kdump_install_net "$_val"
;;
dracut_args)
if [[ $(get_dracut_args_fstype "$_val") = nfs* ]] ; then
kdump_install_net "$(get_dracut_args_target "$_val")"
fi
;;
kdump_pre|kdump_post|extra_bins)
dracut_install $_val
;;
core_collector)
dracut_install "${_val%%[[:blank:]]*}"
;;
esac
done <<< "$(read_strip_comments /etc/kdump.conf)"
kdump_install_pre_post_conf
default_dump_target_install_conf
kdump_configure_fence_kdump "${initdir}/tmp/$$-kdump.conf"
inst "${initdir}/tmp/$$-kdump.conf" "/etc/kdump.conf"
rm -f ${initdir}/tmp/$$-kdump.conf
}
# Default sysctl parameters should suffice for kdump kernel.
# Remove custom configurations sysctl.conf & sysctl.d/*
remove_sysctl_conf() {
# As custom configurations like vm.min_free_kbytes can lead
# to OOM issues in kdump kernel, avoid them
rm -f "${initdir}/etc/sysctl.conf"
rm -rf "${initdir}/etc/sysctl.d"
rm -rf "${initdir}/run/sysctl.d"
rm -rf "${initdir}/usr/lib/sysctl.d"
}
kdump_iscsi_get_rec_val() {
local result
# The open-iscsi 742 release changed to using flat files in
# /var/lib/iscsi.
result=$(/sbin/iscsiadm --show -m session -r ${1} | grep "^${2} = ")
result=${result##* = }
echo $result
}
kdump_get_iscsi_initiator() {
local _initiator
local initiator_conf="/etc/iscsi/initiatorname.iscsi"
[ -f "$initiator_conf" ] || return 1
while read _initiator; do
[ -z "${_initiator%%#*}" ] && continue # Skip comment lines
case $_initiator in
InitiatorName=*)
initiator=${_initiator#InitiatorName=}
echo "rd.iscsi.initiator=${initiator}"
return 0;;
*) ;;
esac
done < ${initiator_conf}
return 1
}
# Figure out iBFT session according to session type
is_ibft() {
[ "$(kdump_iscsi_get_rec_val $1 "node.discovery_type")" = fw ]
}
kdump_setup_iscsi_device() {
local path=$1
local tgt_name; local tgt_ipaddr;
local username; local password; local userpwd_str;
local username_in; local password_in; local userpwd_in_str;
local netdev
local srcaddr
local idev
local netroot_str ; local initiator_str;
local netroot_conf="${initdir}/etc/cmdline.d/50iscsi.conf"
local initiator_conf="/etc/iscsi/initiatorname.iscsi"
dinfo "Found iscsi component $1"
# Check once before getting explicit values, so we can bail out early,
# e.g. in case of pure-hardware(all-offload) iscsi.
if ! /sbin/iscsiadm -m session -r ${path} &>/dev/null ; then
return 1
fi
if is_ibft ${path}; then
return
fi
# Remove software iscsi cmdline generated by 95iscsi,
# and let kdump regenerate here.
rm -f ${initdir}/etc/cmdline.d/95iscsi.conf
tgt_name=$(kdump_iscsi_get_rec_val ${path} "node.name")
tgt_ipaddr=$(kdump_iscsi_get_rec_val ${path} "node.conn\[0\].address")
# get and set username and password details
username=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.username")
[ "$username" == "<empty>" ] && username=""
password=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.password")
[ "$password" == "<empty>" ] && password=""
username_in=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.username_in")
[ -n "$username" ] && userpwd_str="$username:$password"
# get and set incoming username and password details
[ "$username_in" == "<empty>" ] && username_in=""
password_in=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.password_in")
[ "$password_in" == "<empty>" ] && password_in=""
[ -n "$username_in" ] && userpwd_in_str=":$username_in:$password_in"
netdev=$(/sbin/ip route get to ${tgt_ipaddr} | \
sed 's|.*dev \(.*\).*|\1|g')
srcaddr=$(echo $netdev | awk '{ print $3; exit }')
netdev=$(echo $netdev | awk '{ print $1; exit }')
kdump_setup_netdev $netdev $srcaddr
# prepare netroot= command line
# FIXME: Do we need to parse and set other parameters like protocol, port
# iscsi_iface_name, netdev_name, LUN etc.
if is_ipv6_address $tgt_ipaddr; then
tgt_ipaddr="[$tgt_ipaddr]"
fi
netroot_str="netroot=iscsi:${userpwd_str}${userpwd_in_str}@$tgt_ipaddr::::$tgt_name"
[[ -f $netroot_conf ]] || touch $netroot_conf
# If netroot target does not exist already, append.
if ! grep -q $netroot_str $netroot_conf; then
echo $netroot_str >> $netroot_conf
dinfo "Appended $netroot_str to $netroot_conf"
fi
# Setup initator
initiator_str=$(kdump_get_iscsi_initiator)
[ $? -ne "0" ] && derror "Failed to get initiator name" && return 1
# If initiator details do not exist already, append.
if ! grep -q "$initiator_str" $netroot_conf; then
echo "$initiator_str" >> $netroot_conf
dinfo "Appended "$initiator_str" to $netroot_conf"
fi
}
kdump_check_iscsi_targets () {
# If our prerequisites are not met, fail anyways.
type -P iscsistart >/dev/null || return 1
kdump_check_setup_iscsi() {
local _dev
_dev=$1
[[ -L /sys/dev/block/$_dev ]] || return
cd "$(readlink -f /sys/dev/block/$_dev)"
until [[ -d sys || -d iscsi_session ]]; do
cd ..
done
[[ -d iscsi_session ]] && kdump_setup_iscsi_device "$PWD"
}
[[ $hostonly ]] || [[ $mount_needs ]] && {
for_each_host_dev_and_slaves_all kdump_check_setup_iscsi
}
}
# hostname -a is deprecated, do it by ourself
get_alias() {
local ips
local entries
local alias_set
ips=$(hostname -I)
for ip in $ips
do
# in /etc/hosts, alias can come at the 2nd column
entries=$(grep $ip /etc/hosts | awk '{ $1=""; print $0 }')
if [ $? -eq 0 ]; then
alias_set="$alias_set $entries"
fi
done
echo $alias_set
}
is_localhost() {
local hostnames=$(hostname -A)
local shortnames=$(hostname -A -s)
local aliasname=$(get_alias)
local nodename=$1
hostnames="$hostnames $shortnames $aliasname"
for name in ${hostnames}; do
if [ "$name" == "$nodename" ]; then
return 0
fi
done
return 1
}
# retrieves fence_kdump nodes from Pacemaker cluster configuration
get_pcs_fence_kdump_nodes() {
local nodes
# get cluster nodes from cluster cib, get interface and ip address
nodelist=`pcs cluster cib | xmllint --xpath "/cib/status/node_state/@uname" -`
# nodelist is formed as 'uname="node1" uname="node2" ... uname="nodeX"'
# we need to convert each to node1, node2 ... nodeX in each iteration
for node in ${nodelist}; do
# convert $node from 'uname="nodeX"' to 'nodeX'
eval $node
nodename=$uname
# Skip its own node name
if [ "$nodename" = `hostname` -o "$nodename" = `hostname -s` ]; then
continue
fi
nodes="$nodes $nodename"
done
echo $nodes
}
# retrieves fence_kdump args from config file
get_pcs_fence_kdump_args() {
if [ -f $FENCE_KDUMP_CONFIG_FILE ]; then
. $FENCE_KDUMP_CONFIG_FILE
echo $FENCE_KDUMP_OPTS
fi
}
get_generic_fence_kdump_nodes() {
local filtered
local nodes
nodes=$(get_option_value "fence_kdump_nodes")
for node in ${nodes}; do
# Skip its own node name
if is_localhost $node; then
continue
fi
filtered="$filtered $node"
done
echo $filtered
}
# setup fence_kdump in cluster
# setup proper network and install needed files
kdump_configure_fence_kdump () {
local kdump_cfg_file=$1
local nodes
local args
if is_generic_fence_kdump; then
nodes=$(get_generic_fence_kdump_nodes)
elif is_pcs_fence_kdump; then
nodes=$(get_pcs_fence_kdump_nodes)
# set appropriate options in kdump.conf
echo "fence_kdump_nodes $nodes" >> ${kdump_cfg_file}
args=$(get_pcs_fence_kdump_args)
if [ -n "$args" ]; then
echo "fence_kdump_args $args" >> ${kdump_cfg_file}
fi
else
# fence_kdump not configured
return 1
fi
# setup network for each node
for node in ${nodes}; do
kdump_install_net $node
done
dracut_install /etc/hosts
dracut_install /etc/nsswitch.conf
dracut_install $FENCE_KDUMP_SEND
}
# Install a random seed used to feed /dev/urandom
# By the time kdump service starts, /dev/uramdom is already fed by systemd
kdump_install_random_seed() {
local poolsize=`cat /proc/sys/kernel/random/poolsize`
if [ ! -d ${initdir}/var/lib/ ]; then
mkdir -p ${initdir}/var/lib/
fi
dd if=/dev/urandom of=${initdir}/var/lib/random-seed \
bs=$poolsize count=1 2> /dev/null
}
remove_cpu_online_rule() {
local file=${initdir}/usr/lib/udev/rules.d/40-redhat.rules
sed -i '/SUBSYSTEM=="cpu"/d' $file
}
kdump_install_systemd_conf() {
local failure_action=$(get_option_value "failure_action")
# Kdump turns out to require longer default systemd mount timeout
# than 1st kernel(90s by default), we use default 300s for kdump.
grep -r "^[[:space:]]*DefaultTimeoutStartSec=" ${initdir}/etc/systemd/system.conf* &>/dev/null
if [ $? -ne 0 ]; then
mkdir -p ${initdir}/etc/systemd/system.conf.d
echo "[Manager]" > ${initdir}/etc/systemd/system.conf.d/kdump.conf
echo "DefaultTimeoutStartSec=300s" >> ${initdir}/etc/systemd/system.conf.d/kdump.conf
fi
# Forward logs to console directly, and don't read Kmsg, this avoids
# unneccessary memory consumption and make console output more useful.
# Only do so for non fadump image.
mkdir -p ${initdir}/etc/systemd/journald.conf.d
echo "[Journal]" > ${initdir}/etc/systemd/journald.conf.d/kdump.conf
echo "Storage=volatile" >> ${initdir}/etc/systemd/journald.conf.d/kdump.conf
echo "ReadKMsg=no" >> ${initdir}/etc/systemd/journald.conf.d/kdump.conf
echo "ForwardToConsole=yes" >> ${initdir}/etc/systemd/journald.conf.d/kdump.conf
}
install() {
declare -A unique_netifs
local arch _netifs
kdump_module_init
kdump_install_conf
remove_sysctl_conf
# Onlining secondary cpus breaks kdump completely on KVM on Power hosts
# Though we use maxcpus=1 by default but 40-redhat.rules will bring up all
# possible cpus by default. (rhbz1270174 rhbz1266322)
# Thus before we get the kernel fix and the systemd rule fix let's remove
# the cpu online rule in kdump initramfs.
arch=$(uname -m)
if [[ "$arch" = "ppc64le" ]] || [[ "$arch" = "ppc64" ]]; then
remove_cpu_online_rule
fi
if is_ssh_dump_target; then
kdump_install_random_seed
fi
dracut_install -o /etc/adjtime /etc/localtime
inst "$moddir/monitor_dd_progress" "/kdumpscripts/monitor_dd_progress"
chmod +x ${initdir}/kdumpscripts/monitor_dd_progress
inst "/bin/dd" "/bin/dd"
inst "/bin/tail" "/bin/tail"
inst "/bin/date" "/bin/date"
inst "/bin/sync" "/bin/sync"
inst "/bin/cut" "/bin/cut"
inst "/bin/head" "/bin/head"
inst "/sbin/makedumpfile" "/sbin/makedumpfile"
inst "/sbin/vmcore-dmesg" "/sbin/vmcore-dmesg"
inst "/usr/bin/printf" "/sbin/printf"
inst "/usr/bin/logger" "/sbin/logger"
inst "/usr/bin/chmod" "/sbin/chmod"
inst "/lib/kdump/kdump-lib.sh" "/lib/kdump-lib.sh"
inst "/lib/kdump/kdump-lib-initramfs.sh" "/lib/kdump-lib-initramfs.sh"
inst "/lib/kdump/kdump-logger.sh" "/lib/kdump-logger.sh"
inst "$moddir/kdump.sh" "/usr/bin/kdump.sh"
inst "$moddir/kdump-capture.service" "$systemdsystemunitdir/kdump-capture.service"
systemctl -q --root "$initdir" add-wants initrd.target kdump-capture.service
inst "$moddir/kdump-error-handler.sh" "/usr/bin/kdump-error-handler.sh"
inst "$moddir/kdump-error-handler.service" "$systemdsystemunitdir/kdump-error-handler.service"
# Replace existing emergency service and emergency target
cp "$moddir/kdump-emergency.service" "$initdir/$systemdsystemunitdir/emergency.service"
cp "$moddir/kdump-emergency.target" "$initdir/$systemdsystemunitdir/emergency.target"
# Also redirect dracut-emergency to kdump error handler
ln_r "$systemdsystemunitdir/emergency.service" "$systemdsystemunitdir/dracut-emergency.service"
# Check for all the devices and if any device is iscsi, bring up iscsi
# target. Ideally all this should be pushed into dracut iscsi module
# at some point of time.
kdump_check_iscsi_targets
_netifs=$(_get_kdump_netifs)
if [[ -n "$_netifs" ]]; then
kdump_install_nm_netif_allowlist "$_netifs"
kdump_install_nic_driver "$_netifs"
fi
kdump_install_systemd_conf
# For the lvm type target under kdump, in /etc/lvm/lvm.conf we can
# safely replace "reserved_memory=XXXX"(default value is 8192) with
# "reserved_memory=1024" to lower memory pressure under kdump. We do
# it unconditionally here, if "/etc/lvm/lvm.conf" doesn't exist, it
# actually does nothing.
sed -i -e \
's/\(^[[:space:]]*reserved_memory[[:space:]]*=\)[[:space:]]*[[:digit:]]*/\1 1024/' \
${initdir}/etc/lvm/lvm.conf &>/dev/null
# Skip initrd-cleanup.service and initrd-parse-etc.service becasue we don't
# need to switch root. Instead of removing them, we use ConditionPathExists
# to check if /proc/vmcore exists to determine if we are in kdump.
sed -i '/\[Unit\]/a ConditionPathExists=!\/proc\/vmcore' \
"${initdir}/${systemdsystemunitdir}/initrd-cleanup.service" &> /dev/null
sed -i '/\[Unit\]/a ConditionPathExists=!\/proc\/vmcore' \
"${initdir}/${systemdsystemunitdir}/initrd-parse-etc.service" &> /dev/null
# Save more memory by dropping switch root capability
dracut_no_switch_root
}
Mini Shell