Current File : //proc/thread-self/root/opt/alt/python34/lib64/python3.4/zipfile.py
"""
Read and write ZIP files.
XXX references to utf-8 need further investigation.
"""
import io
import os
import re
import importlib.util
import sys
import time
import stat
import shutil
import struct
import binascii
try:
import zlib # We may need its compression method
crc32 = zlib.crc32
except ImportError:
zlib = None
crc32 = binascii.crc32
try:
import bz2 # We may need its compression method
except ImportError:
bz2 = None
try:
import lzma # We may need its compression method
except ImportError:
lzma = None
__all__ = ["BadZipFile", "BadZipfile", "error",
"ZIP_STORED", "ZIP_DEFLATED", "ZIP_BZIP2", "ZIP_LZMA",
"is_zipfile", "ZipInfo", "ZipFile", "PyZipFile", "LargeZipFile"]
class BadZipFile(Exception):
pass
class LargeZipFile(Exception):
"""
Raised when writing a zipfile, the zipfile requires ZIP64 extensions
and those extensions are disabled.
"""
error = BadZipfile = BadZipFile # Pre-3.2 compatibility names
ZIP64_LIMIT = (1 << 31) - 1
ZIP_FILECOUNT_LIMIT = (1 << 16) - 1
ZIP_MAX_COMMENT = (1 << 16) - 1
# constants for Zip file compression methods
ZIP_STORED = 0
ZIP_DEFLATED = 8
ZIP_BZIP2 = 12
ZIP_LZMA = 14
# Other ZIP compression methods not supported
DEFAULT_VERSION = 20
ZIP64_VERSION = 45
BZIP2_VERSION = 46
LZMA_VERSION = 63
# we recognize (but not necessarily support) all features up to that version
MAX_EXTRACT_VERSION = 63
# Below are some formats and associated data for reading/writing headers using
# the struct module. The names and structures of headers/records are those used
# in the PKWARE description of the ZIP file format:
# http://www.pkware.com/documents/casestudies/APPNOTE.TXT
# (URL valid as of January 2008)
# The "end of central directory" structure, magic number, size, and indices
# (section V.I in the format document)
structEndArchive = b"<4s4H2LH"
stringEndArchive = b"PK\005\006"
sizeEndCentDir = struct.calcsize(structEndArchive)
_ECD_SIGNATURE = 0
_ECD_DISK_NUMBER = 1
_ECD_DISK_START = 2
_ECD_ENTRIES_THIS_DISK = 3
_ECD_ENTRIES_TOTAL = 4
_ECD_SIZE = 5
_ECD_OFFSET = 6
_ECD_COMMENT_SIZE = 7
# These last two indices are not part of the structure as defined in the
# spec, but they are used internally by this module as a convenience
_ECD_COMMENT = 8
_ECD_LOCATION = 9
# The "central directory" structure, magic number, size, and indices
# of entries in the structure (section V.F in the format document)
structCentralDir = "<4s4B4HL2L5H2L"
stringCentralDir = b"PK\001\002"
sizeCentralDir = struct.calcsize(structCentralDir)
# indexes of entries in the central directory structure
_CD_SIGNATURE = 0
_CD_CREATE_VERSION = 1
_CD_CREATE_SYSTEM = 2
_CD_EXTRACT_VERSION = 3
_CD_EXTRACT_SYSTEM = 4
_CD_FLAG_BITS = 5
_CD_COMPRESS_TYPE = 6
_CD_TIME = 7
_CD_DATE = 8
_CD_CRC = 9
_CD_COMPRESSED_SIZE = 10
_CD_UNCOMPRESSED_SIZE = 11
_CD_FILENAME_LENGTH = 12
_CD_EXTRA_FIELD_LENGTH = 13
_CD_COMMENT_LENGTH = 14
_CD_DISK_NUMBER_START = 15
_CD_INTERNAL_FILE_ATTRIBUTES = 16
_CD_EXTERNAL_FILE_ATTRIBUTES = 17
_CD_LOCAL_HEADER_OFFSET = 18
# The "local file header" structure, magic number, size, and indices
# (section V.A in the format document)
structFileHeader = "<4s2B4HL2L2H"
stringFileHeader = b"PK\003\004"
sizeFileHeader = struct.calcsize(structFileHeader)
_FH_SIGNATURE = 0
_FH_EXTRACT_VERSION = 1
_FH_EXTRACT_SYSTEM = 2
_FH_GENERAL_PURPOSE_FLAG_BITS = 3
_FH_COMPRESSION_METHOD = 4
_FH_LAST_MOD_TIME = 5
_FH_LAST_MOD_DATE = 6
_FH_CRC = 7
_FH_COMPRESSED_SIZE = 8
_FH_UNCOMPRESSED_SIZE = 9
_FH_FILENAME_LENGTH = 10
_FH_EXTRA_FIELD_LENGTH = 11
# The "Zip64 end of central directory locator" structure, magic number, and size
structEndArchive64Locator = "<4sLQL"
stringEndArchive64Locator = b"PK\x06\x07"
sizeEndCentDir64Locator = struct.calcsize(structEndArchive64Locator)
# The "Zip64 end of central directory" record, magic number, size, and indices
# (section V.G in the format document)
structEndArchive64 = "<4sQ2H2L4Q"
stringEndArchive64 = b"PK\x06\x06"
sizeEndCentDir64 = struct.calcsize(structEndArchive64)
_CD64_SIGNATURE = 0
_CD64_DIRECTORY_RECSIZE = 1
_CD64_CREATE_VERSION = 2
_CD64_EXTRACT_VERSION = 3
_CD64_DISK_NUMBER = 4
_CD64_DISK_NUMBER_START = 5
_CD64_NUMBER_ENTRIES_THIS_DISK = 6
_CD64_NUMBER_ENTRIES_TOTAL = 7
_CD64_DIRECTORY_SIZE = 8
_CD64_OFFSET_START_CENTDIR = 9
def _check_zipfile(fp):
try:
if _EndRecData(fp):
return True # file has correct magic number
except OSError:
pass
return False
def is_zipfile(filename):
"""Quickly see if a file is a ZIP file by checking the magic number.
The filename argument may be a file or file-like object too.
"""
result = False
try:
if hasattr(filename, "read"):
result = _check_zipfile(fp=filename)
else:
with open(filename, "rb") as fp:
result = _check_zipfile(fp)
except OSError:
pass
return result
def _EndRecData64(fpin, offset, endrec):
"""
Read the ZIP64 end-of-archive records and use that to update endrec
"""
try:
fpin.seek(offset - sizeEndCentDir64Locator, 2)
except OSError:
# If the seek fails, the file is not large enough to contain a ZIP64
# end-of-archive record, so just return the end record we were given.
return endrec
data = fpin.read(sizeEndCentDir64Locator)
if len(data) != sizeEndCentDir64Locator:
return endrec
sig, diskno, reloff, disks = struct.unpack(structEndArchive64Locator, data)
if sig != stringEndArchive64Locator:
return endrec
if diskno != 0 or disks != 1:
raise BadZipFile("zipfiles that span multiple disks are not supported")
# Assume no 'zip64 extensible data'
fpin.seek(offset - sizeEndCentDir64Locator - sizeEndCentDir64, 2)
data = fpin.read(sizeEndCentDir64)
if len(data) != sizeEndCentDir64:
return endrec
sig, sz, create_version, read_version, disk_num, disk_dir, \
dircount, dircount2, dirsize, diroffset = \
struct.unpack(structEndArchive64, data)
if sig != stringEndArchive64:
return endrec
# Update the original endrec using data from the ZIP64 record
endrec[_ECD_SIGNATURE] = sig
endrec[_ECD_DISK_NUMBER] = disk_num
endrec[_ECD_DISK_START] = disk_dir
endrec[_ECD_ENTRIES_THIS_DISK] = dircount
endrec[_ECD_ENTRIES_TOTAL] = dircount2
endrec[_ECD_SIZE] = dirsize
endrec[_ECD_OFFSET] = diroffset
return endrec
def _EndRecData(fpin):
"""Return data from the "End of Central Directory" record, or None.
The data is a list of the nine items in the ZIP "End of central dir"
record followed by a tenth item, the file seek offset of this record."""
# Determine file size
fpin.seek(0, 2)
filesize = fpin.tell()
# Check to see if this is ZIP file with no archive comment (the
# "end of central directory" structure should be the last item in the
# file if this is the case).
try:
fpin.seek(-sizeEndCentDir, 2)
except OSError:
return None
data = fpin.read()
if (len(data) == sizeEndCentDir and
data[0:4] == stringEndArchive and
data[-2:] == b"\000\000"):
# the signature is correct and there's no comment, unpack structure
endrec = struct.unpack(structEndArchive, data)
endrec=list(endrec)
# Append a blank comment and record start offset
endrec.append(b"")
endrec.append(filesize - sizeEndCentDir)
# Try to read the "Zip64 end of central directory" structure
return _EndRecData64(fpin, -sizeEndCentDir, endrec)
# Either this is not a ZIP file, or it is a ZIP file with an archive
# comment. Search the end of the file for the "end of central directory"
# record signature. The comment is the last item in the ZIP file and may be
# up to 64K long. It is assumed that the "end of central directory" magic
# number does not appear in the comment.
maxCommentStart = max(filesize - (1 << 16) - sizeEndCentDir, 0)
fpin.seek(maxCommentStart, 0)
data = fpin.read()
start = data.rfind(stringEndArchive)
if start >= 0:
# found the magic number; attempt to unpack and interpret
recData = data[start:start+sizeEndCentDir]
if len(recData) != sizeEndCentDir:
# Zip file is corrupted.
return None
endrec = list(struct.unpack(structEndArchive, recData))
commentSize = endrec[_ECD_COMMENT_SIZE] #as claimed by the zip file
comment = data[start+sizeEndCentDir:start+sizeEndCentDir+commentSize]
endrec.append(comment)
endrec.append(maxCommentStart + start)
# Try to read the "Zip64 end of central directory" structure
return _EndRecData64(fpin, maxCommentStart + start - filesize,
endrec)
# Unable to find a valid end of central directory structure
return None
class ZipInfo (object):
"""Class with attributes describing each file in the ZIP archive."""
__slots__ = (
'orig_filename',
'filename',
'date_time',
'compress_type',
'comment',
'extra',
'create_system',
'create_version',
'extract_version',
'reserved',
'flag_bits',
'volume',
'internal_attr',
'external_attr',
'header_offset',
'CRC',
'compress_size',
'file_size',
'_raw_time',
)
def __init__(self, filename="NoName", date_time=(1980,1,1,0,0,0)):
self.orig_filename = filename # Original file name in archive
# Terminate the file name at the first null byte. Null bytes in file
# names are used as tricks by viruses in archives.
null_byte = filename.find(chr(0))
if null_byte >= 0:
filename = filename[0:null_byte]
# This is used to ensure paths in generated ZIP files always use
# forward slashes as the directory separator, as required by the
# ZIP format specification.
if os.sep != "/" and os.sep in filename:
filename = filename.replace(os.sep, "/")
self.filename = filename # Normalized file name
self.date_time = date_time # year, month, day, hour, min, sec
if date_time[0] < 1980:
raise ValueError('ZIP does not support timestamps before 1980')
# Standard values:
self.compress_type = ZIP_STORED # Type of compression for the file
self.comment = b"" # Comment for each file
self.extra = b"" # ZIP extra data
if sys.platform == 'win32':
self.create_system = 0 # System which created ZIP archive
else:
# Assume everything else is unix-y
self.create_system = 3 # System which created ZIP archive
self.create_version = DEFAULT_VERSION # Version which created ZIP archive
self.extract_version = DEFAULT_VERSION # Version needed to extract archive
self.reserved = 0 # Must be zero
self.flag_bits = 0 # ZIP flag bits
self.volume = 0 # Volume number of file header
self.internal_attr = 0 # Internal attributes
self.external_attr = 0 # External file attributes
# Other attributes are set by class ZipFile:
# header_offset Byte offset to the file header
# CRC CRC-32 of the uncompressed file
# compress_size Size of the compressed file
# file_size Size of the uncompressed file
def FileHeader(self, zip64=None):
"""Return the per-file header as a string."""
dt = self.date_time
dosdate = (dt[0] - 1980) << 9 | dt[1] << 5 | dt[2]
dostime = dt[3] << 11 | dt[4] << 5 | (dt[5] // 2)
if self.flag_bits & 0x08:
# Set these to zero because we write them after the file data
CRC = compress_size = file_size = 0
else:
CRC = self.CRC
compress_size = self.compress_size
file_size = self.file_size
extra = self.extra
min_version = 0
if zip64 is None:
zip64 = file_size > ZIP64_LIMIT or compress_size > ZIP64_LIMIT
if zip64:
fmt = '<HHQQ'
extra = extra + struct.pack(fmt,
1, struct.calcsize(fmt)-4, file_size, compress_size)
if file_size > ZIP64_LIMIT or compress_size > ZIP64_LIMIT:
if not zip64:
raise LargeZipFile("Filesize would require ZIP64 extensions")
# File is larger than what fits into a 4 byte integer,
# fall back to the ZIP64 extension
file_size = 0xffffffff
compress_size = 0xffffffff
min_version = ZIP64_VERSION
if self.compress_type == ZIP_BZIP2:
min_version = max(BZIP2_VERSION, min_version)
elif self.compress_type == ZIP_LZMA:
min_version = max(LZMA_VERSION, min_version)
self.extract_version = max(min_version, self.extract_version)
self.create_version = max(min_version, self.create_version)
filename, flag_bits = self._encodeFilenameFlags()
header = struct.pack(structFileHeader, stringFileHeader,
self.extract_version, self.reserved, flag_bits,
self.compress_type, dostime, dosdate, CRC,
compress_size, file_size,
len(filename), len(extra))
return header + filename + extra
def _encodeFilenameFlags(self):
try:
return self.filename.encode('ascii'), self.flag_bits
except UnicodeEncodeError:
return self.filename.encode('utf-8'), self.flag_bits | 0x800
def _decodeExtra(self):
# Try to decode the extra field.
extra = self.extra
unpack = struct.unpack
while len(extra) >= 4:
tp, ln = unpack('<HH', extra[:4])
if tp == 1:
if ln >= 24:
counts = unpack('<QQQ', extra[4:28])
elif ln == 16:
counts = unpack('<QQ', extra[4:20])
elif ln == 8:
counts = unpack('<Q', extra[4:12])
elif ln == 0:
counts = ()
else:
raise RuntimeError("Corrupt extra field %s"%(ln,))
idx = 0
# ZIP64 extension (large files and/or large archives)
if self.file_size in (0xffffffffffffffff, 0xffffffff):
self.file_size = counts[idx]
idx += 1
if self.compress_size == 0xFFFFFFFF:
self.compress_size = counts[idx]
idx += 1
if self.header_offset == 0xffffffff:
old = self.header_offset
self.header_offset = counts[idx]
idx+=1
extra = extra[ln+4:]
class _ZipDecrypter:
"""Class to handle decryption of files stored within a ZIP archive.
ZIP supports a password-based form of encryption. Even though known
plaintext attacks have been found against it, it is still useful
to be able to get data out of such a file.
Usage:
zd = _ZipDecrypter(mypwd)
plain_char = zd(cypher_char)
plain_text = map(zd, cypher_text)
"""
def _GenerateCRCTable():
"""Generate a CRC-32 table.
ZIP encryption uses the CRC32 one-byte primitive for scrambling some
internal keys. We noticed that a direct implementation is faster than
relying on binascii.crc32().
"""
poly = 0xedb88320
table = [0] * 256
for i in range(256):
crc = i
for j in range(8):
if crc & 1:
crc = ((crc >> 1) & 0x7FFFFFFF) ^ poly
else:
crc = ((crc >> 1) & 0x7FFFFFFF)
table[i] = crc
return table
crctable = None
def _crc32(self, ch, crc):
"""Compute the CRC32 primitive on one byte."""
return ((crc >> 8) & 0xffffff) ^ self.crctable[(crc ^ ch) & 0xff]
def __init__(self, pwd):
if _ZipDecrypter.crctable is None:
_ZipDecrypter.crctable = _ZipDecrypter._GenerateCRCTable()
self.key0 = 305419896
self.key1 = 591751049
self.key2 = 878082192
for p in pwd:
self._UpdateKeys(p)
def _UpdateKeys(self, c):
self.key0 = self._crc32(c, self.key0)
self.key1 = (self.key1 + (self.key0 & 255)) & 4294967295
self.key1 = (self.key1 * 134775813 + 1) & 4294967295
self.key2 = self._crc32((self.key1 >> 24) & 255, self.key2)
def __call__(self, c):
"""Decrypt a single character."""
assert isinstance(c, int)
k = self.key2 | 2
c = c ^ (((k * (k^1)) >> 8) & 255)
self._UpdateKeys(c)
return c
class LZMACompressor:
def __init__(self):
self._comp = None
def _init(self):
props = lzma._encode_filter_properties({'id': lzma.FILTER_LZMA1})
self._comp = lzma.LZMACompressor(lzma.FORMAT_RAW, filters=[
lzma._decode_filter_properties(lzma.FILTER_LZMA1, props)
])
return struct.pack('<BBH', 9, 4, len(props)) + props
def compress(self, data):
if self._comp is None:
return self._init() + self._comp.compress(data)
return self._comp.compress(data)
def flush(self):
if self._comp is None:
return self._init() + self._comp.flush()
return self._comp.flush()
class LZMADecompressor:
def __init__(self):
self._decomp = None
self._unconsumed = b''
self.eof = False
def decompress(self, data):
if self._decomp is None:
self._unconsumed += data
if len(self._unconsumed) <= 4:
return b''
psize, = struct.unpack('<H', self._unconsumed[2:4])
if len(self._unconsumed) <= 4 + psize:
return b''
self._decomp = lzma.LZMADecompressor(lzma.FORMAT_RAW, filters=[
lzma._decode_filter_properties(lzma.FILTER_LZMA1,
self._unconsumed[4:4 + psize])
])
data = self._unconsumed[4 + psize:]
del self._unconsumed
result = self._decomp.decompress(data)
self.eof = self._decomp.eof
return result
compressor_names = {
0: 'store',
1: 'shrink',
2: 'reduce',
3: 'reduce',
4: 'reduce',
5: 'reduce',
6: 'implode',
7: 'tokenize',
8: 'deflate',
9: 'deflate64',
10: 'implode',
12: 'bzip2',
14: 'lzma',
18: 'terse',
19: 'lz77',
97: 'wavpack',
98: 'ppmd',
}
def _check_compression(compression):
if compression == ZIP_STORED:
pass
elif compression == ZIP_DEFLATED:
if not zlib:
raise RuntimeError(
"Compression requires the (missing) zlib module")
elif compression == ZIP_BZIP2:
if not bz2:
raise RuntimeError(
"Compression requires the (missing) bz2 module")
elif compression == ZIP_LZMA:
if not lzma:
raise RuntimeError(
"Compression requires the (missing) lzma module")
else:
raise RuntimeError("That compression method is not supported")
def _get_compressor(compress_type):
if compress_type == ZIP_DEFLATED:
return zlib.compressobj(zlib.Z_DEFAULT_COMPRESSION,
zlib.DEFLATED, -15)
elif compress_type == ZIP_BZIP2:
return bz2.BZ2Compressor()
elif compress_type == ZIP_LZMA:
return LZMACompressor()
else:
return None
def _get_decompressor(compress_type):
if compress_type == ZIP_STORED:
return None
elif compress_type == ZIP_DEFLATED:
return zlib.decompressobj(-15)
elif compress_type == ZIP_BZIP2:
return bz2.BZ2Decompressor()
elif compress_type == ZIP_LZMA:
return LZMADecompressor()
else:
descr = compressor_names.get(compress_type)
if descr:
raise NotImplementedError("compression type %d (%s)" % (compress_type, descr))
else:
raise NotImplementedError("compression type %d" % (compress_type,))
class ZipExtFile(io.BufferedIOBase):
"""File-like object for reading an archive member.
Is returned by ZipFile.open().
"""
# Max size supported by decompressor.
MAX_N = 1 << 31 - 1
# Read from compressed files in 4k blocks.
MIN_READ_SIZE = 4096
# Search for universal newlines or line chunks.
PATTERN = re.compile(br'^(?P<chunk>[^\r\n]+)|(?P<newline>\n|\r\n?)')
def __init__(self, fileobj, mode, zipinfo, decrypter=None,
close_fileobj=False):
self._fileobj = fileobj
self._decrypter = decrypter
self._close_fileobj = close_fileobj
self._compress_type = zipinfo.compress_type
self._compress_left = zipinfo.compress_size
self._left = zipinfo.file_size
self._decompressor = _get_decompressor(self._compress_type)
self._eof = False
self._readbuffer = b''
self._offset = 0
self._universal = 'U' in mode
self.newlines = None
# Adjust read size for encrypted files since the first 12 bytes
# are for the encryption/password information.
if self._decrypter is not None:
self._compress_left -= 12
self.mode = mode
self.name = zipinfo.filename
if hasattr(zipinfo, 'CRC'):
self._expected_crc = zipinfo.CRC
self._running_crc = crc32(b'') & 0xffffffff
else:
self._expected_crc = None
def readline(self, limit=-1):
"""Read and return a line from the stream.
If limit is specified, at most limit bytes will be read.
"""
if not self._universal and limit < 0:
# Shortcut common case - newline found in buffer.
i = self._readbuffer.find(b'\n', self._offset) + 1
if i > 0:
line = self._readbuffer[self._offset: i]
self._offset = i
return line
if not self._universal:
return io.BufferedIOBase.readline(self, limit)
line = b''
while limit < 0 or len(line) < limit:
readahead = self.peek(2)
if readahead == b'':
return line
#
# Search for universal newlines or line chunks.
#
# The pattern returns either a line chunk or a newline, but not
# both. Combined with peek(2), we are assured that the sequence
# '\r\n' is always retrieved completely and never split into
# separate newlines - '\r', '\n' due to coincidental readaheads.
#
match = self.PATTERN.search(readahead)
newline = match.group('newline')
if newline is not None:
if self.newlines is None:
self.newlines = []
if newline not in self.newlines:
self.newlines.append(newline)
self._offset += len(newline)
return line + b'\n'
chunk = match.group('chunk')
if limit >= 0:
chunk = chunk[: limit - len(line)]
self._offset += len(chunk)
line += chunk
return line
def peek(self, n=1):
"""Returns buffered bytes without advancing the position."""
if n > len(self._readbuffer) - self._offset:
chunk = self.read(n)
if len(chunk) > self._offset:
self._readbuffer = chunk + self._readbuffer[self._offset:]
self._offset = 0
else:
self._offset -= len(chunk)
# Return up to 512 bytes to reduce allocation overhead for tight loops.
return self._readbuffer[self._offset: self._offset + 512]
def readable(self):
return True
def read(self, n=-1):
"""Read and return up to n bytes.
If the argument is omitted, None, or negative, data is read and returned until EOF is reached..
"""
if n is None or n < 0:
buf = self._readbuffer[self._offset:]
self._readbuffer = b''
self._offset = 0
while not self._eof:
buf += self._read1(self.MAX_N)
return buf
end = n + self._offset
if end < len(self._readbuffer):
buf = self._readbuffer[self._offset:end]
self._offset = end
return buf
n = end - len(self._readbuffer)
buf = self._readbuffer[self._offset:]
self._readbuffer = b''
self._offset = 0
while n > 0 and not self._eof:
data = self._read1(n)
if n < len(data):
self._readbuffer = data
self._offset = n
buf += data[:n]
break
buf += data
n -= len(data)
return buf
def _update_crc(self, newdata):
# Update the CRC using the given data.
if self._expected_crc is None:
# No need to compute the CRC if we don't have a reference value
return
self._running_crc = crc32(newdata, self._running_crc) & 0xffffffff
# Check the CRC if we're at the end of the file
if self._eof and self._running_crc != self._expected_crc:
raise BadZipFile("Bad CRC-32 for file %r" % self.name)
def read1(self, n):
"""Read up to n bytes with at most one read() system call."""
if n is None or n < 0:
buf = self._readbuffer[self._offset:]
self._readbuffer = b''
self._offset = 0
while not self._eof:
data = self._read1(self.MAX_N)
if data:
buf += data
break
return buf
end = n + self._offset
if end < len(self._readbuffer):
buf = self._readbuffer[self._offset:end]
self._offset = end
return buf
n = end - len(self._readbuffer)
buf = self._readbuffer[self._offset:]
self._readbuffer = b''
self._offset = 0
if n > 0:
while not self._eof:
data = self._read1(n)
if n < len(data):
self._readbuffer = data
self._offset = n
buf += data[:n]
break
if data:
buf += data
break
return buf
def _read1(self, n):
# Read up to n compressed bytes with at most one read() system call,
# decrypt and decompress them.
if self._eof or n <= 0:
return b''
# Read from file.
if self._compress_type == ZIP_DEFLATED:
## Handle unconsumed data.
data = self._decompressor.unconsumed_tail
if n > len(data):
data += self._read2(n - len(data))
else:
data = self._read2(n)
if self._compress_type == ZIP_STORED:
self._eof = self._compress_left <= 0
elif self._compress_type == ZIP_DEFLATED:
n = max(n, self.MIN_READ_SIZE)
data = self._decompressor.decompress(data, n)
self._eof = (self._decompressor.eof or
self._compress_left <= 0 and
not self._decompressor.unconsumed_tail)
if self._eof:
data += self._decompressor.flush()
else:
data = self._decompressor.decompress(data)
self._eof = self._decompressor.eof or self._compress_left <= 0
data = data[:self._left]
self._left -= len(data)
if self._left <= 0:
self._eof = True
self._update_crc(data)
return data
def _read2(self, n):
if self._compress_left <= 0:
return b''
n = max(n, self.MIN_READ_SIZE)
n = min(n, self._compress_left)
data = self._fileobj.read(n)
self._compress_left -= len(data)
if not data:
raise EOFError
if self._decrypter is not None:
data = bytes(map(self._decrypter, data))
return data
def close(self):
try:
if self._close_fileobj:
self._fileobj.close()
finally:
super().close()
class ZipFile:
""" Class with methods to open, read, write, close, list zip files.
z = ZipFile(file, mode="r", compression=ZIP_STORED, allowZip64=True)
file: Either the path to the file, or a file-like object.
If it is a path, the file will be opened and closed by ZipFile.
mode: The mode can be either read "r", write "w" or append "a".
compression: ZIP_STORED (no compression), ZIP_DEFLATED (requires zlib),
ZIP_BZIP2 (requires bz2) or ZIP_LZMA (requires lzma).
allowZip64: if True ZipFile will create files with ZIP64 extensions when
needed, otherwise it will raise an exception when this would
be necessary.
"""
fp = None # Set here since __del__ checks it
_windows_illegal_name_trans_table = None
def __init__(self, file, mode="r", compression=ZIP_STORED, allowZip64=True):
"""Open the ZIP file with mode read "r", write "w" or append "a"."""
if mode not in ("r", "w", "a"):
raise RuntimeError('ZipFile() requires mode "r", "w", or "a"')
_check_compression(compression)
self._allowZip64 = allowZip64
self._didModify = False
self.debug = 0 # Level of printing: 0 through 3
self.NameToInfo = {} # Find file info given name
self.filelist = [] # List of ZipInfo instances for archive
self.compression = compression # Method of compression
self.mode = key = mode.replace('b', '')[0]
self.pwd = None
self._comment = b''
# Check if we were passed a file-like object
if isinstance(file, str):
# No, it's a filename
self._filePassed = 0
self.filename = file
modeDict = {'r' : 'rb', 'w': 'wb', 'a' : 'r+b'}
try:
self.fp = io.open(file, modeDict[mode])
except OSError:
if mode == 'a':
mode = key = 'w'
self.fp = io.open(file, modeDict[mode])
else:
raise
else:
self._filePassed = 1
self.fp = file
self.filename = getattr(file, 'name', None)
try:
if key == 'r':
self._RealGetContents()
elif key == 'w':
# set the modified flag so central directory gets written
# even if no files are added to the archive
self._didModify = True
elif key == 'a':
try:
# See if file is a zip file
self._RealGetContents()
# seek to start of directory and overwrite
self.fp.seek(self.start_dir, 0)
except BadZipFile:
# file is not a zip file, just append
self.fp.seek(0, 2)
# set the modified flag so central directory gets written
# even if no files are added to the archive
self._didModify = True
else:
raise RuntimeError('Mode must be "r", "w" or "a"')
except:
fp = self.fp
self.fp = None
if not self._filePassed:
fp.close()
raise
def __enter__(self):
return self
def __exit__(self, type, value, traceback):
self.close()
def _RealGetContents(self):
"""Read in the table of contents for the ZIP file."""
fp = self.fp
try:
endrec = _EndRecData(fp)
except OSError:
raise BadZipFile("File is not a zip file")
if not endrec:
raise BadZipFile("File is not a zip file")
if self.debug > 1:
print(endrec)
size_cd = endrec[_ECD_SIZE] # bytes in central directory
offset_cd = endrec[_ECD_OFFSET] # offset of central directory
self._comment = endrec[_ECD_COMMENT] # archive comment
# "concat" is zero, unless zip was concatenated to another file
concat = endrec[_ECD_LOCATION] - size_cd - offset_cd
if endrec[_ECD_SIGNATURE] == stringEndArchive64:
# If Zip64 extension structures are present, account for them
concat -= (sizeEndCentDir64 + sizeEndCentDir64Locator)
if self.debug > 2:
inferred = concat + offset_cd
print("given, inferred, offset", offset_cd, inferred, concat)
# self.start_dir: Position of start of central directory
self.start_dir = offset_cd + concat
fp.seek(self.start_dir, 0)
data = fp.read(size_cd)
fp = io.BytesIO(data)
total = 0
while total < size_cd:
centdir = fp.read(sizeCentralDir)
if len(centdir) != sizeCentralDir:
raise BadZipFile("Truncated central directory")
centdir = struct.unpack(structCentralDir, centdir)
if centdir[_CD_SIGNATURE] != stringCentralDir:
raise BadZipFile("Bad magic number for central directory")
if self.debug > 2:
print(centdir)
filename = fp.read(centdir[_CD_FILENAME_LENGTH])
flags = centdir[5]
if flags & 0x800:
# UTF-8 file names extension
filename = filename.decode('utf-8')
else:
# Historical ZIP filename encoding
filename = filename.decode('cp437')
# Create ZipInfo instance to store file information
x = ZipInfo(filename)
x.extra = fp.read(centdir[_CD_EXTRA_FIELD_LENGTH])
x.comment = fp.read(centdir[_CD_COMMENT_LENGTH])
x.header_offset = centdir[_CD_LOCAL_HEADER_OFFSET]
(x.create_version, x.create_system, x.extract_version, x.reserved,
x.flag_bits, x.compress_type, t, d,
x.CRC, x.compress_size, x.file_size) = centdir[1:12]
if x.extract_version > MAX_EXTRACT_VERSION:
raise NotImplementedError("zip file version %.1f" %
(x.extract_version / 10))
x.volume, x.internal_attr, x.external_attr = centdir[15:18]
# Convert date/time code to (year, month, day, hour, min, sec)
x._raw_time = t
x.date_time = ( (d>>9)+1980, (d>>5)&0xF, d&0x1F,
t>>11, (t>>5)&0x3F, (t&0x1F) * 2 )
x._decodeExtra()
x.header_offset = x.header_offset + concat
self.filelist.append(x)
self.NameToInfo[x.filename] = x
# update total bytes read from central directory
total = (total + sizeCentralDir + centdir[_CD_FILENAME_LENGTH]
+ centdir[_CD_EXTRA_FIELD_LENGTH]
+ centdir[_CD_COMMENT_LENGTH])
if self.debug > 2:
print("total", total)
def namelist(self):
"""Return a list of file names in the archive."""
return [data.filename for data in self.filelist]
def infolist(self):
"""Return a list of class ZipInfo instances for files in the
archive."""
return self.filelist
def printdir(self, file=None):
"""Print a table of contents for the zip file."""
print("%-46s %19s %12s" % ("File Name", "Modified ", "Size"),
file=file)
for zinfo in self.filelist:
date = "%d-%02d-%02d %02d:%02d:%02d" % zinfo.date_time[:6]
print("%-46s %s %12d" % (zinfo.filename, date, zinfo.file_size),
file=file)
def testzip(self):
"""Read all the files and check the CRC."""
chunk_size = 2 ** 20
for zinfo in self.filelist:
try:
# Read by chunks, to avoid an OverflowError or a
# MemoryError with very large embedded files.
with self.open(zinfo.filename, "r") as f:
while f.read(chunk_size): # Check CRC-32
pass
except BadZipFile:
return zinfo.filename
def getinfo(self, name):
"""Return the instance of ZipInfo given 'name'."""
info = self.NameToInfo.get(name)
if info is None:
raise KeyError(
'There is no item named %r in the archive' % name)
return info
def setpassword(self, pwd):
"""Set default password for encrypted files."""
if pwd and not isinstance(pwd, bytes):
raise TypeError("pwd: expected bytes, got %s" % type(pwd))
if pwd:
self.pwd = pwd
else:
self.pwd = None
@property
def comment(self):
"""The comment text associated with the ZIP file."""
return self._comment
@comment.setter
def comment(self, comment):
if not isinstance(comment, bytes):
raise TypeError("comment: expected bytes, got %s" % type(comment))
# check for valid comment length
if len(comment) > ZIP_MAX_COMMENT:
import warnings
warnings.warn('Archive comment is too long; truncating to %d bytes'
% ZIP_MAX_COMMENT, stacklevel=2)
comment = comment[:ZIP_MAX_COMMENT]
self._comment = comment
self._didModify = True
def read(self, name, pwd=None):
"""Return file bytes (as a string) for name."""
with self.open(name, "r", pwd) as fp:
return fp.read()
def open(self, name, mode="r", pwd=None):
"""Return file-like object for 'name'."""
if mode not in ("r", "U", "rU"):
raise RuntimeError('open() requires mode "r", "U", or "rU"')
if 'U' in mode:
import warnings
warnings.warn("'U' mode is deprecated",
DeprecationWarning, 2)
if pwd and not isinstance(pwd, bytes):
raise TypeError("pwd: expected bytes, got %s" % type(pwd))
if not self.fp:
raise RuntimeError(
"Attempt to read ZIP archive that was already closed")
# Only open a new file for instances where we were not
# given a file object in the constructor
if self._filePassed:
zef_file = self.fp
else:
zef_file = io.open(self.filename, 'rb')
try:
# Make sure we have an info object
if isinstance(name, ZipInfo):
# 'name' is already an info object
zinfo = name
else:
# Get info object for name
zinfo = self.getinfo(name)
zef_file.seek(zinfo.header_offset, 0)
# Skip the file header:
fheader = zef_file.read(sizeFileHeader)
if len(fheader) != sizeFileHeader:
raise BadZipFile("Truncated file header")
fheader = struct.unpack(structFileHeader, fheader)
if fheader[_FH_SIGNATURE] != stringFileHeader:
raise BadZipFile("Bad magic number for file header")
fname = zef_file.read(fheader[_FH_FILENAME_LENGTH])
if fheader[_FH_EXTRA_FIELD_LENGTH]:
zef_file.read(fheader[_FH_EXTRA_FIELD_LENGTH])
if zinfo.flag_bits & 0x20:
# Zip 2.7: compressed patched data
raise NotImplementedError("compressed patched data (flag bit 5)")
if zinfo.flag_bits & 0x40:
# strong encryption
raise NotImplementedError("strong encryption (flag bit 6)")
if zinfo.flag_bits & 0x800:
# UTF-8 filename
fname_str = fname.decode("utf-8")
else:
fname_str = fname.decode("cp437")
if fname_str != zinfo.orig_filename:
raise BadZipFile(
'File name in directory %r and header %r differ.'
% (zinfo.orig_filename, fname))
# check for encrypted flag & handle password
is_encrypted = zinfo.flag_bits & 0x1
zd = None
if is_encrypted:
if not pwd:
pwd = self.pwd
if not pwd:
raise RuntimeError("File %s is encrypted, password "
"required for extraction" % name)
zd = _ZipDecrypter(pwd)
# The first 12 bytes in the cypher stream is an encryption header
# used to strengthen the algorithm. The first 11 bytes are
# completely random, while the 12th contains the MSB of the CRC,
# or the MSB of the file time depending on the header type
# and is used to check the correctness of the password.
header = zef_file.read(12)
h = list(map(zd, header[0:12]))
if zinfo.flag_bits & 0x8:
# compare against the file type from extended local headers
check_byte = (zinfo._raw_time >> 8) & 0xff
else:
# compare against the CRC otherwise
check_byte = (zinfo.CRC >> 24) & 0xff
if h[11] != check_byte:
raise RuntimeError("Bad password for file", name)
return ZipExtFile(zef_file, mode, zinfo, zd,
close_fileobj=not self._filePassed)
except:
if not self._filePassed:
zef_file.close()
raise
def extract(self, member, path=None, pwd=None):
"""Extract a member from the archive to the current working directory,
using its full name. Its file information is extracted as accurately
as possible. `member' may be a filename or a ZipInfo object. You can
specify a different directory using `path'.
"""
if not isinstance(member, ZipInfo):
member = self.getinfo(member)
if path is None:
path = os.getcwd()
return self._extract_member(member, path, pwd)
def extractall(self, path=None, members=None, pwd=None):
"""Extract all members from the archive to the current working
directory. `path' specifies a different directory to extract to.
`members' is optional and must be a subset of the list returned
by namelist().
"""
if members is None:
members = self.namelist()
for zipinfo in members:
self.extract(zipinfo, path, pwd)
@classmethod
def _sanitize_windows_name(cls, arcname, pathsep):
"""Replace bad characters and remove trailing dots from parts."""
table = cls._windows_illegal_name_trans_table
if not table:
illegal = ':<>|"?*'
table = str.maketrans(illegal, '_' * len(illegal))
cls._windows_illegal_name_trans_table = table
arcname = arcname.translate(table)
# remove trailing dots
arcname = (x.rstrip('.') for x in arcname.split(pathsep))
# rejoin, removing empty parts.
arcname = pathsep.join(x for x in arcname if x)
return arcname
def _extract_member(self, member, targetpath, pwd):
"""Extract the ZipInfo object 'member' to a physical
file on the path targetpath.
"""
# build the destination pathname, replacing
# forward slashes to platform specific separators.
arcname = member.filename.replace('/', os.path.sep)
if os.path.altsep:
arcname = arcname.replace(os.path.altsep, os.path.sep)
# interpret absolute pathname as relative, remove drive letter or
# UNC path, redundant separators, "." and ".." components.
arcname = os.path.splitdrive(arcname)[1]
invalid_path_parts = ('', os.path.curdir, os.path.pardir)
arcname = os.path.sep.join(x for x in arcname.split(os.path.sep)
if x not in invalid_path_parts)
if os.path.sep == '\\':
# filter illegal characters on Windows
arcname = self._sanitize_windows_name(arcname, os.path.sep)
targetpath = os.path.join(targetpath, arcname)
targetpath = os.path.normpath(targetpath)
# Create all upper directories if necessary.
upperdirs = os.path.dirname(targetpath)
if upperdirs and not os.path.exists(upperdirs):
os.makedirs(upperdirs)
if member.filename[-1] == '/':
if not os.path.isdir(targetpath):
os.mkdir(targetpath)
return targetpath
with self.open(member, pwd=pwd) as source, \
open(targetpath, "wb") as target:
shutil.copyfileobj(source, target)
return targetpath
def _writecheck(self, zinfo):
"""Check for errors before writing a file to the archive."""
if zinfo.filename in self.NameToInfo:
import warnings
warnings.warn('Duplicate name: %r' % zinfo.filename, stacklevel=3)
if self.mode not in ("w", "a"):
raise RuntimeError('write() requires mode "w" or "a"')
if not self.fp:
raise RuntimeError(
"Attempt to write ZIP archive that was already closed")
_check_compression(zinfo.compress_type)
if not self._allowZip64:
requires_zip64 = None
if len(self.filelist) >= ZIP_FILECOUNT_LIMIT:
requires_zip64 = "Files count"
elif zinfo.file_size > ZIP64_LIMIT:
requires_zip64 = "Filesize"
elif zinfo.header_offset > ZIP64_LIMIT:
requires_zip64 = "Zipfile size"
if requires_zip64:
raise LargeZipFile(requires_zip64 +
" would require ZIP64 extensions")
def write(self, filename, arcname=None, compress_type=None):
"""Put the bytes from filename into the archive under the name
arcname."""
if not self.fp:
raise RuntimeError(
"Attempt to write to ZIP archive that was already closed")
st = os.stat(filename)
isdir = stat.S_ISDIR(st.st_mode)
mtime = time.localtime(st.st_mtime)
date_time = mtime[0:6]
# Create ZipInfo instance to store file information
if arcname is None:
arcname = filename
arcname = os.path.normpath(os.path.splitdrive(arcname)[1])
while arcname[0] in (os.sep, os.altsep):
arcname = arcname[1:]
if isdir:
arcname += '/'
zinfo = ZipInfo(arcname, date_time)
zinfo.external_attr = (st[0] & 0xFFFF) << 16 # Unix attributes
if isdir:
zinfo.compress_type = ZIP_STORED
elif compress_type is None:
zinfo.compress_type = self.compression
else:
zinfo.compress_type = compress_type
zinfo.file_size = st.st_size
zinfo.flag_bits = 0x00
zinfo.header_offset = self.fp.tell() # Start of header bytes
if zinfo.compress_type == ZIP_LZMA:
# Compressed data includes an end-of-stream (EOS) marker
zinfo.flag_bits |= 0x02
self._writecheck(zinfo)
self._didModify = True
if isdir:
zinfo.file_size = 0
zinfo.compress_size = 0
zinfo.CRC = 0
zinfo.external_attr |= 0x10 # MS-DOS directory flag
self.filelist.append(zinfo)
self.NameToInfo[zinfo.filename] = zinfo
self.fp.write(zinfo.FileHeader(False))
return
cmpr = _get_compressor(zinfo.compress_type)
with open(filename, "rb") as fp:
# Must overwrite CRC and sizes with correct data later
zinfo.CRC = CRC = 0
zinfo.compress_size = compress_size = 0
# Compressed size can be larger than uncompressed size
zip64 = self._allowZip64 and \
zinfo.file_size * 1.05 > ZIP64_LIMIT
self.fp.write(zinfo.FileHeader(zip64))
file_size = 0
while 1:
buf = fp.read(1024 * 8)
if not buf:
break
file_size = file_size + len(buf)
CRC = crc32(buf, CRC) & 0xffffffff
if cmpr:
buf = cmpr.compress(buf)
compress_size = compress_size + len(buf)
self.fp.write(buf)
if cmpr:
buf = cmpr.flush()
compress_size = compress_size + len(buf)
self.fp.write(buf)
zinfo.compress_size = compress_size
else:
zinfo.compress_size = file_size
zinfo.CRC = CRC
zinfo.file_size = file_size
if not zip64 and self._allowZip64:
if file_size > ZIP64_LIMIT:
raise RuntimeError('File size has increased during compressing')
if compress_size > ZIP64_LIMIT:
raise RuntimeError('Compressed size larger than uncompressed size')
# Seek backwards and write file header (which will now include
# correct CRC and file sizes)
position = self.fp.tell() # Preserve current position in file
self.fp.seek(zinfo.header_offset, 0)
self.fp.write(zinfo.FileHeader(zip64))
self.fp.seek(position, 0)
self.filelist.append(zinfo)
self.NameToInfo[zinfo.filename] = zinfo
def writestr(self, zinfo_or_arcname, data, compress_type=None):
"""Write a file into the archive. The contents is 'data', which
may be either a 'str' or a 'bytes' instance; if it is a 'str',
it is encoded as UTF-8 first.
'zinfo_or_arcname' is either a ZipInfo instance or
the name of the file in the archive."""
if isinstance(data, str):
data = data.encode("utf-8")
if not isinstance(zinfo_or_arcname, ZipInfo):
zinfo = ZipInfo(filename=zinfo_or_arcname,
date_time=time.localtime(time.time())[:6])
zinfo.compress_type = self.compression
if zinfo.filename[-1] == '/':
zinfo.external_attr = 0o40775 << 16 # drwxrwxr-x
zinfo.external_attr |= 0x10 # MS-DOS directory flag
else:
zinfo.external_attr = 0o600 << 16 # ?rw-------
else:
zinfo = zinfo_or_arcname
if not self.fp:
raise RuntimeError(
"Attempt to write to ZIP archive that was already closed")
zinfo.file_size = len(data) # Uncompressed size
zinfo.header_offset = self.fp.tell() # Start of header data
if compress_type is not None:
zinfo.compress_type = compress_type
if zinfo.compress_type == ZIP_LZMA:
# Compressed data includes an end-of-stream (EOS) marker
zinfo.flag_bits |= 0x02
self._writecheck(zinfo)
self._didModify = True
zinfo.CRC = crc32(data) & 0xffffffff # CRC-32 checksum
co = _get_compressor(zinfo.compress_type)
if co:
data = co.compress(data) + co.flush()
zinfo.compress_size = len(data) # Compressed size
else:
zinfo.compress_size = zinfo.file_size
zip64 = zinfo.file_size > ZIP64_LIMIT or \
zinfo.compress_size > ZIP64_LIMIT
if zip64 and not self._allowZip64:
raise LargeZipFile("Filesize would require ZIP64 extensions")
self.fp.write(zinfo.FileHeader(zip64))
self.fp.write(data)
if zinfo.flag_bits & 0x08:
# Write CRC and file sizes after the file data
fmt = '<LQQ' if zip64 else '<LLL'
self.fp.write(struct.pack(fmt, zinfo.CRC, zinfo.compress_size,
zinfo.file_size))
self.fp.flush()
self.filelist.append(zinfo)
self.NameToInfo[zinfo.filename] = zinfo
def __del__(self):
"""Call the "close()" method in case the user forgot."""
self.close()
def close(self):
"""Close the file, and for mode "w" and "a" write the ending
records."""
if self.fp is None:
return
try:
if self.mode in ("w", "a") and self._didModify: # write ending records
pos1 = self.fp.tell()
for zinfo in self.filelist: # write central directory
dt = zinfo.date_time
dosdate = (dt[0] - 1980) << 9 | dt[1] << 5 | dt[2]
dostime = dt[3] << 11 | dt[4] << 5 | (dt[5] // 2)
extra = []
if zinfo.file_size > ZIP64_LIMIT \
or zinfo.compress_size > ZIP64_LIMIT:
extra.append(zinfo.file_size)
extra.append(zinfo.compress_size)
file_size = 0xffffffff
compress_size = 0xffffffff
else:
file_size = zinfo.file_size
compress_size = zinfo.compress_size
if zinfo.header_offset > ZIP64_LIMIT:
extra.append(zinfo.header_offset)
header_offset = 0xffffffff
else:
header_offset = zinfo.header_offset
extra_data = zinfo.extra
min_version = 0
if extra:
# Append a ZIP64 field to the extra's
extra_data = struct.pack(
'<HH' + 'Q'*len(extra),
1, 8*len(extra), *extra) + extra_data
min_version = ZIP64_VERSION
if zinfo.compress_type == ZIP_BZIP2:
min_version = max(BZIP2_VERSION, min_version)
elif zinfo.compress_type == ZIP_LZMA:
min_version = max(LZMA_VERSION, min_version)
extract_version = max(min_version, zinfo.extract_version)
create_version = max(min_version, zinfo.create_version)
try:
filename, flag_bits = zinfo._encodeFilenameFlags()
centdir = struct.pack(structCentralDir,
stringCentralDir, create_version,
zinfo.create_system, extract_version, zinfo.reserved,
flag_bits, zinfo.compress_type, dostime, dosdate,
zinfo.CRC, compress_size, file_size,
len(filename), len(extra_data), len(zinfo.comment),
0, zinfo.internal_attr, zinfo.external_attr,
header_offset)
except DeprecationWarning:
print((structCentralDir, stringCentralDir, create_version,
zinfo.create_system, extract_version, zinfo.reserved,
zinfo.flag_bits, zinfo.compress_type, dostime, dosdate,
zinfo.CRC, compress_size, file_size,
len(zinfo.filename), len(extra_data), len(zinfo.comment),
0, zinfo.internal_attr, zinfo.external_attr,
header_offset), file=sys.stderr)
raise
self.fp.write(centdir)
self.fp.write(filename)
self.fp.write(extra_data)
self.fp.write(zinfo.comment)
pos2 = self.fp.tell()
# Write end-of-zip-archive record
centDirCount = len(self.filelist)
centDirSize = pos2 - pos1
centDirOffset = pos1
requires_zip64 = None
if centDirCount > ZIP_FILECOUNT_LIMIT:
requires_zip64 = "Files count"
elif centDirOffset > ZIP64_LIMIT:
requires_zip64 = "Central directory offset"
elif centDirSize > ZIP64_LIMIT:
requires_zip64 = "Central directory size"
if requires_zip64:
# Need to write the ZIP64 end-of-archive records
if not self._allowZip64:
raise LargeZipFile(requires_zip64 +
" would require ZIP64 extensions")
zip64endrec = struct.pack(
structEndArchive64, stringEndArchive64,
44, 45, 45, 0, 0, centDirCount, centDirCount,
centDirSize, centDirOffset)
self.fp.write(zip64endrec)
zip64locrec = struct.pack(
structEndArchive64Locator,
stringEndArchive64Locator, 0, pos2, 1)
self.fp.write(zip64locrec)
centDirCount = min(centDirCount, 0xFFFF)
centDirSize = min(centDirSize, 0xFFFFFFFF)
centDirOffset = min(centDirOffset, 0xFFFFFFFF)
endrec = struct.pack(structEndArchive, stringEndArchive,
0, 0, centDirCount, centDirCount,
centDirSize, centDirOffset, len(self._comment))
self.fp.write(endrec)
self.fp.write(self._comment)
self.fp.flush()
finally:
fp = self.fp
self.fp = None
if not self._filePassed:
fp.close()
class PyZipFile(ZipFile):
"""Class to create ZIP archives with Python library files and packages."""
def __init__(self, file, mode="r", compression=ZIP_STORED,
allowZip64=True, optimize=-1):
ZipFile.__init__(self, file, mode=mode, compression=compression,
allowZip64=allowZip64)
self._optimize = optimize
def writepy(self, pathname, basename="", filterfunc=None):
"""Add all files from "pathname" to the ZIP archive.
If pathname is a package directory, search the directory and
all package subdirectories recursively for all *.py and enter
the modules into the archive. If pathname is a plain
directory, listdir *.py and enter all modules. Else, pathname
must be a Python *.py file and the module will be put into the
archive. Added modules are always module.pyo or module.pyc.
This method will compile the module.py into module.pyc if
necessary.
If filterfunc(pathname) is given, it is called with every argument.
When it is False, the file or directory is skipped.
"""
if filterfunc and not filterfunc(pathname):
if self.debug:
label = 'path' if os.path.isdir(pathname) else 'file'
print('%s "%s" skipped by filterfunc' % (label, pathname))
return
dir, name = os.path.split(pathname)
if os.path.isdir(pathname):
initname = os.path.join(pathname, "__init__.py")
if os.path.isfile(initname):
# This is a package directory, add it
if basename:
basename = "%s/%s" % (basename, name)
else:
basename = name
if self.debug:
print("Adding package in", pathname, "as", basename)
fname, arcname = self._get_codename(initname[0:-3], basename)
if self.debug:
print("Adding", arcname)
self.write(fname, arcname)
dirlist = os.listdir(pathname)
dirlist.remove("__init__.py")
# Add all *.py files and package subdirectories
for filename in dirlist:
path = os.path.join(pathname, filename)
root, ext = os.path.splitext(filename)
if os.path.isdir(path):
if os.path.isfile(os.path.join(path, "__init__.py")):
# This is a package directory, add it
self.writepy(path, basename,
filterfunc=filterfunc) # Recursive call
elif ext == ".py":
if filterfunc and not filterfunc(path):
if self.debug:
print('file "%s" skipped by filterfunc' % path)
continue
fname, arcname = self._get_codename(path[0:-3],
basename)
if self.debug:
print("Adding", arcname)
self.write(fname, arcname)
else:
# This is NOT a package directory, add its files at top level
if self.debug:
print("Adding files from directory", pathname)
for filename in os.listdir(pathname):
path = os.path.join(pathname, filename)
root, ext = os.path.splitext(filename)
if ext == ".py":
if filterfunc and not filterfunc(path):
if self.debug:
print('file "%s" skipped by filterfunc' % path)
continue
fname, arcname = self._get_codename(path[0:-3],
basename)
if self.debug:
print("Adding", arcname)
self.write(fname, arcname)
else:
if pathname[-3:] != ".py":
raise RuntimeError(
'Files added with writepy() must end with ".py"')
fname, arcname = self._get_codename(pathname[0:-3], basename)
if self.debug:
print("Adding file", arcname)
self.write(fname, arcname)
def _get_codename(self, pathname, basename):
"""Return (filename, archivename) for the path.
Given a module name path, return the correct file path and
archive name, compiling if necessary. For example, given
/python/lib/string, return (/python/lib/string.pyc, string).
"""
def _compile(file, optimize=-1):
import py_compile
if self.debug:
print("Compiling", file)
try:
py_compile.compile(file, doraise=True, optimize=optimize)
except py_compile.PyCompileError as err:
print(err.msg)
return False
return True
file_py = pathname + ".py"
file_pyc = pathname + ".pyc"
file_pyo = pathname + ".pyo"
pycache_pyc = importlib.util.cache_from_source(file_py, True)
pycache_pyo = importlib.util.cache_from_source(file_py, False)
if self._optimize == -1:
# legacy mode: use whatever file is present
if (os.path.isfile(file_pyo) and
os.stat(file_pyo).st_mtime >= os.stat(file_py).st_mtime):
# Use .pyo file.
arcname = fname = file_pyo
elif (os.path.isfile(file_pyc) and
os.stat(file_pyc).st_mtime >= os.stat(file_py).st_mtime):
# Use .pyc file.
arcname = fname = file_pyc
elif (os.path.isfile(pycache_pyc) and
os.stat(pycache_pyc).st_mtime >= os.stat(file_py).st_mtime):
# Use the __pycache__/*.pyc file, but write it to the legacy pyc
# file name in the archive.
fname = pycache_pyc
arcname = file_pyc
elif (os.path.isfile(pycache_pyo) and
os.stat(pycache_pyo).st_mtime >= os.stat(file_py).st_mtime):
# Use the __pycache__/*.pyo file, but write it to the legacy pyo
# file name in the archive.
fname = pycache_pyo
arcname = file_pyo
else:
# Compile py into PEP 3147 pyc file.
if _compile(file_py):
fname = (pycache_pyc if __debug__ else pycache_pyo)
arcname = (file_pyc if __debug__ else file_pyo)
else:
fname = arcname = file_py
else:
# new mode: use given optimization level
if self._optimize == 0:
fname = pycache_pyc
arcname = file_pyc
else:
fname = pycache_pyo
arcname = file_pyo
if not (os.path.isfile(fname) and
os.stat(fname).st_mtime >= os.stat(file_py).st_mtime):
if not _compile(file_py, optimize=self._optimize):
fname = arcname = file_py
archivename = os.path.split(arcname)[1]
if basename:
archivename = "%s/%s" % (basename, archivename)
return (fname, archivename)
def main(args = None):
import textwrap
USAGE=textwrap.dedent("""\
Usage:
zipfile.py -l zipfile.zip # Show listing of a zipfile
zipfile.py -t zipfile.zip # Test if a zipfile is valid
zipfile.py -e zipfile.zip target # Extract zipfile into target dir
zipfile.py -c zipfile.zip src ... # Create zipfile from sources
""")
if args is None:
args = sys.argv[1:]
if not args or args[0] not in ('-l', '-c', '-e', '-t'):
print(USAGE)
sys.exit(1)
if args[0] == '-l':
if len(args) != 2:
print(USAGE)
sys.exit(1)
with ZipFile(args[1], 'r') as zf:
zf.printdir()
elif args[0] == '-t':
if len(args) != 2:
print(USAGE)
sys.exit(1)
with ZipFile(args[1], 'r') as zf:
badfile = zf.testzip()
if badfile:
print("The following enclosed file is corrupted: {!r}".format(badfile))
print("Done testing")
elif args[0] == '-e':
if len(args) != 3:
print(USAGE)
sys.exit(1)
with ZipFile(args[1], 'r') as zf:
zf.extractall(args[2])
elif args[0] == '-c':
if len(args) < 3:
print(USAGE)
sys.exit(1)
def addToZip(zf, path, zippath):
if os.path.isfile(path):
zf.write(path, zippath, ZIP_DEFLATED)
elif os.path.isdir(path):
if zippath:
zf.write(path, zippath)
for nm in os.listdir(path):
addToZip(zf,
os.path.join(path, nm), os.path.join(zippath, nm))
# else: ignore
with ZipFile(args[1], 'w') as zf:
for path in args[2:]:
zippath = os.path.basename(path)
if not zippath:
zippath = os.path.basename(os.path.dirname(path))
if zippath in ('', os.curdir, os.pardir):
zippath = ''
addToZip(zf, path, zippath)
if __name__ == "__main__":
main()
Mini Shell