Current File : //proc/thread-self/root/opt/alt/ruby27/share/gems/gems/rake-13.0.1/doc/rakefile.rdoc
= Rakefile Format
First of all, there is no special format for a Rakefile. A Rakefile
contains executable Ruby code. Anything legal in a ruby script is
allowed in a Rakefile.
Now that we understand there is no special syntax in a Rakefile, there
are some conventions that are used in a Rakefile that are a little
unusual in a typical Ruby program. Since a Rakefile is tailored to
specifying tasks and actions, the idioms used in a Rakefile are
designed to support that.
So, what goes into a Rakefile?
== Tasks
Tasks are the main unit of work in a Rakefile. Tasks have a name
(usually given as a symbol or a string), a list of prerequisites (more
symbols or strings) and a list of actions (given as a block).
=== Simple Tasks
A task is declared by using the +task+ method. +task+ takes a single
parameter that is the name of the task.
task :name
=== Tasks with Prerequisites
Any prerequisites are given as a list (enclosed in square brackets)
following the name and an arrow (=>).
task name: [:prereq1, :prereq2]
*NOTE:* Although this syntax looks a little funky, it is legal
Ruby. We are constructing a hash where the key is :name and the value
for that key is the list of prerequisites. It is equivalent to the
following ...
hash = Hash.new
hash[:name] = [:prereq1, :prereq2]
task(hash)
You can also use strings for task names and prerequisites, rake doesn't care.
This is the same task definition:
task 'name' => %w[prereq1 prereq2]
As is this:
task name: %w[prereq1 prereq2]
We'll prefer this style for regular tasks with prerequisites throughout the
rest of the document. Using an array of strings for the prerequisites means
you will need to make fewer changes if you need to move tasks into namespaces
or perform other refactorings.
=== Tasks with Actions
Actions are defined by passing a block to the +task+ method. Any Ruby
code can be placed in the block. The block may reference the task
object via the block parameter.
task name: [:prereq1, :prereq2] do |t|
# actions (may reference t)
end
=== Multiple Definitions
A task may be specified more than once. Each specification adds its
prerequisites and actions to the existing definition. This allows one
part of a rakefile to specify the actions and a different rakefile
(perhaps separately generated) to specify the dependencies.
For example, the following is equivalent to the single task
specification given above.
task :name
task name: :prereq1
task name: %w[prereq2]
task :name do |t|
# actions
end
== File Tasks
Some tasks are designed to create a file from one or more other files.
Tasks that generate these files may be skipped if the file already
exists. File tasks are used to specify file creation tasks.
File tasks are declared using the +file+ method (instead of the +task+
method). In addition, file tasks are usually named with a string
rather than a symbol.
The following file task creates a executable program (named +prog+)
given two object files named +a.o+ and +b.o+. The tasks
for creating +a.o+ and +b.o+ are not shown.
file "prog" => ["a.o", "b.o"] do |t|
sh "cc -o #{t.name} #{t.prerequisites.join(' ')}"
end
== Directory Tasks
It is common to need to create directories upon demand. The
+directory+ convenience method is a short-hand for creating a FileTask
that creates the directory. For example, the following declaration
...
directory "testdata/examples/doc"
is equivalent to ...
file "testdata" do |t| mkdir t.name end
file "testdata/examples" => ["testdata"] do |t| mkdir t.name end
file "testdata/examples/doc" => ["testdata/examples"] do |t| mkdir t.name end
The +directory+ method does not accept prerequisites or actions, but
both prerequisites and actions can be added later. For example ...
directory "testdata"
file "testdata" => ["otherdata"]
file "testdata" do
cp Dir["standard_data/*.data"], "testdata"
end
== Tasks with Parallel Prerequisites
Rake allows parallel execution of prerequisites using the following syntax:
multitask copy_files: %w[copy_src copy_doc copy_bin] do
puts "All Copies Complete"
end
In this example, +copy_files+ is a normal rake task. Its actions are
executed whenever all of its prerequisites are done. The big
difference is that the prerequisites (+copy_src+, +copy_bin+ and
+copy_doc+) are executed in parallel. Each of the prerequisites are
run in their own Ruby thread, possibly allowing faster overall runtime.
=== Secondary Prerequisites
If any of the primary prerequisites of a multitask have common secondary
prerequisites, all of the primary/parallel prerequisites will wait
until the common prerequisites have been run.
For example, if the <tt>copy_<em>xxx</em></tt> tasks have the
following prerequisites:
task copy_src: :prep_for_copy
task copy_bin: :prep_for_copy
task copy_doc: :prep_for_copy
Then the +prep_for_copy+ task is run before starting all the copies in
parallel. Once +prep_for_copy+ is complete, +copy_src+, +copy_bin+,
and +copy_doc+ are all run in parallel. Note that +prep_for_copy+ is
run only once, even though it is referenced in multiple threads.
=== Thread Safety
The Rake internal data structures are thread-safe with respect
to the multitask parallel execution, so there is no need for the user
to do extra synchronization for Rake's benefit. However, if there are
user data structures shared between the parallel prerequisites, the
user must do whatever is necessary to prevent race conditions.
== Tasks with Arguments
Prior to version 0.8.0, rake was only able to handle command line
arguments of the form NAME=VALUE that were passed into Rake via the
ENV hash. Many folks had asked for some kind of simple command line
arguments, perhaps using "--" to separate regular task names from
argument values on the command line. The problem is that there was no
easy way to associate positional arguments on the command line with
different tasks. Suppose both tasks :a and :b expect a command line
argument: does the first value go with :a? What if :b is run first?
Should it then get the first command line argument.
Rake 0.8.0 solves this problem by explicitly passing values directly
to the tasks that need them. For example, if I had a release task
that required a version number, I could say:
rake release[0.8.2]
And the string "0.8.2" will be passed to the :release task. Multiple
arguments can be passed by separating them with a comma, for example:
rake name[john,doe]
Just a few words of caution. The rake task name and its arguments
need to be a single command line argument to rake. This generally
means no spaces. If spaces are needed, then the entire name +
argument string should be quoted. Something like this:
rake "name[billy bob, smith]"
(Quoting rules vary between operating systems and shells, so make sure
you consult the proper docs for your OS/shell).
=== Tasks that Expect Parameters
Parameters are only given to tasks that are setup to expect them. In
order to handle named parameters, the task declaration syntax for
tasks has been extended slightly.
For example, a task that needs a first name and last name might be
declared as:
task :name, [:first_name, :last_name]
The first argument is still the name of the task (:name in this case).
The next two arguments are the names of the parameters expected by
:name in an array (:first_name and :last_name in the example).
To access the values of the parameters, the block defining the task
behaviour can now accept a second parameter:
task :name, [:first_name, :last_name] do |t, args|
puts "First name is #{args.first_name}"
puts "Last name is #{args.last_name}"
end
The first argument of the block "t" is always bound to the current
task object. The second argument "args" is an open-struct like object
that allows access to the task arguments. Extra command line
arguments to a task are ignored.
If you wish to specify default values for the arguments, you can use
the with_defaults method in the task body. Here is the above example
where we specify default values for the first and last names:
task :name, [:first_name, :last_name] do |t, args|
args.with_defaults(:first_name => "John", :last_name => "Dough")
puts "First name is #{args.first_name}"
puts "Last name is #{args.last_name}"
end
=== Tasks that Expect Parameters and Have Prerequisites
Tasks that use parameters have a slightly different format for
prerequisites. Use the arrow notation to indicate the prerequisites
for tasks with arguments. For example:
task :name, [:first_name, :last_name] => [:pre_name] do |t, args|
args.with_defaults(:first_name => "John", :last_name => "Dough")
puts "First name is #{args.first_name}"
puts "Last name is #{args.last_name}"
end
=== Tasks that take Variable-length Parameters
Tasks that need to handle a list of values as a parameter can use the
extras method of the args variable. This allows for tasks that can
loop over a variable number of values, and its compatible with named
parameters as well:
task :email, [:message] do |t, args|
mail = Mail.new(args.message)
recipients = args.extras
recipients.each do |target|
mail.send_to(target)
end
end
There is also the convenience method to_a that returns all parameters
in the sequential order they were given, including those associated
with named parameters.
=== Deprecated Task Parameters Format
There is an older format for declaring task parameters that omitted
the task argument array and used the :needs keyword to introduce the
dependencies. That format is still supported for compatibility, but
is not recommended for use. The older format may be dropped in future
versions of rake.
== Accessing Task Programmatically
Sometimes it is useful to manipulate tasks programmatically in a
Rakefile. To find a task object use Rake::Task.[].
=== Programmatic Task Example
For example, the following Rakefile defines two tasks. The :doit task
simply prints a simple "DONE" message. The :dont class will lookup
the doit class and remove (clear) all of its prerequisites and
actions.
task :doit do
puts "DONE"
end
task :dont do
Rake::Task[:doit].clear
end
Running this example:
$ rake doit
(in /Users/jim/working/git/rake/x)
DONE
$ rake dont doit
(in /Users/jim/working/git/rake/x)
$
The ability to programmatically manipulate tasks gives rake very
powerful meta-programming capabilities w.r.t. task execution, but
should be used with caution.
== Rules
When a file is named as a prerequisite, but does not have a file task
defined for it, Rake will attempt to synthesize a task by looking at a
list of rules supplied in the Rakefile.
Suppose we were trying to invoke task "mycode.o", but no task is
defined for it. But the rakefile has a rule that look like this ...
rule '.o' => ['.c'] do |t|
sh "cc #{t.source} -c -o #{t.name}"
end
This rule will synthesize any task that ends in ".o". It has a
prerequisite a source file with an extension of ".c" must exist. If
Rake is able to find a file named "mycode.c", it will automatically
create a task that builds "mycode.o" from "mycode.c".
If the file "mycode.c" does not exist, rake will attempt
to recursively synthesize a rule for it.
When a task is synthesized from a rule, the +source+ attribute of the
task is set to the matching source file. This allows us to write
rules with actions that reference the source file.
=== Advanced Rules
Any regular expression may be used as the rule pattern. Additionally,
a proc may be used to calculate the name of the source file. This
allows for complex patterns and sources.
The following rule is equivalent to the example above.
rule( /\.o$/ => [
proc {|task_name| task_name.sub(/\.[^.]+$/, '.c') }
]) do |t|
sh "cc #{t.source} -c -o #{t.name}"
end
*NOTE:* Because of a _quirk_ in Ruby syntax, parenthesis are
required on *rule* when the first argument is a regular expression.
The following rule might be used for Java files ...
rule '.class' => [
proc { |tn| tn.sub(/\.class$/, '.java').sub(/^classes\//, 'src/') }
] do |t|
java_compile(t.source, t.name)
end
*NOTE:* +java_compile+ is a hypothetical method that invokes the
java compiler.
== Importing Dependencies
Any ruby file (including other rakefiles) can be included with a
standard Ruby +require+ command. The rules and declarations in the
required file are just added to the definitions already accumulated.
Because the files are loaded _before_ the rake targets are evaluated,
the loaded files must be "ready to go" when the rake command is
invoked. This makes generated dependency files difficult to use. By
the time rake gets around to updating the dependencies file, it is too
late to load it.
The +import+ command addresses this by specifying a file to be loaded
_after_ the main rakefile is loaded, but _before_ any targets on the
command line are invoked. In addition, if the file name matches an
explicit task, that task is invoked before loading the file. This
allows dependency files to be generated and used in a single rake
command invocation.
Example:
require 'rake/loaders/makefile'
file ".depends.mf" => [SRC_LIST] do |t|
sh "makedepend -f- -- #{CFLAGS} -- #{t.prerequisites} > #{t.name}"
end
import ".depends.mf"
If ".depends" does not exist, or is out of date w.r.t. the source
files, a new ".depends" file is generated using +makedepend+ before
loading.
== Comments
Standard Ruby comments (beginning with "#") can be used anywhere it is
legal in Ruby source code, including comments for tasks and rules.
However, if you wish a task to be described using the "-T" switch,
then you need to use the +desc+ command to describe the task.
Example:
desc "Create a distribution package"
task package: %w[ ... ] do ... end
The "-T" switch (or "--tasks" if you like to spell things out) will
display a list of tasks that have a description. If you use +desc+ to
describe your major tasks, you have a semi-automatic way of generating
a summary of your Rake file.
$ rake -T
(in /home/.../rake)
rake clean # Remove any temporary products.
rake clobber # Remove any generated file.
rake clobber_rdoc # Remove rdoc products
rake contrib_test # Run tests for contrib_test
rake default # Default Task
rake install # Install the application
rake lines # Count lines in the main rake file
rake rdoc # Build the rdoc HTML Files
rake rerdoc # Force a rebuild of the RDOC files
rake test # Run tests
rake testall # Run all test targets
Only tasks with descriptions will be displayed with the "-T" switch.
Use "-P" (or "--prereqs") to get a list of all tasks and their
prerequisites.
== Namespaces
As projects grow (and along with it, the number of tasks), it is
common for task names to begin to clash. For example, if you might
have a main program and a set of sample programs built by a single
Rakefile. By placing the tasks related to the main program in one
namespace, and the tasks for building the sample programs in a
different namespace, the task names will not interfere with each other.
For example:
namespace "main" do
task :build do
# Build the main program
end
end
namespace "samples" do
task :build do
# Build the sample programs
end
end
task build: %w[main:build samples:build]
Referencing a task in a separate namespace can be achieved by
prefixing the task name with the namespace and a colon
(e.g. "main:build" refers to the :build task in the +main+ namespace).
Nested namespaces are supported.
Note that the name given in the +task+ command is always the unadorned
task name without any namespace prefixes. The +task+ command always
defines a task in the current namespace.
=== FileTasks
File task names are not scoped by the namespace command. Since the
name of a file task is the name of an actual file in the file system,
it makes little sense to include file task names in name space.
Directory tasks (created by the +directory+ command) are a type of
file task and are also not affected by namespaces.
=== Name Resolution
When looking up a task name, rake will start with the current
namespace and attempt to find the name there. If it fails to find a
name in the current namespace, it will search the parent namespaces
until a match is found (or an error occurs if there is no match).
The "rake" namespace is a special implicit namespace that refers to
the toplevel names.
If a task name begins with a "^" character, the name resolution will
start in the parent namespace. Multiple "^" characters are allowed.
Here is an example file with multiple :run tasks and how various names
resolve in different locations.
task :run
namespace "one" do
task :run
namespace "two" do
task :run
# :run => "one:two:run"
# "two:run" => "one:two:run"
# "one:two:run" => "one:two:run"
# "one:run" => "one:run"
# "^run" => "one:run"
# "^^run" => "rake:run" (the top level task)
# "rake:run" => "rake:run" (the top level task)
end
# :run => "one:run"
# "two:run" => "one:two:run"
# "^run" => "rake:run"
end
# :run => "rake:run"
# "one:run" => "one:run"
# "one:two:run" => "one:two:run"
== FileLists
FileLists are the way Rake manages lists of files. You can treat a
FileList as an array of strings for the most part, but FileLists
support some additional operations.
=== Creating a FileList
Creating a file list is easy. Just give it the list of file names:
fl = FileList['file1.rb', file2.rb']
Or give it a glob pattern:
fl = FileList['*.rb']
== Odds and Ends
=== do/end versus { }
Blocks may be specified with either a +do+/+end+ pair, or with curly
braces in Ruby. We _strongly_ recommend using +do+/+end+ to specify the
actions for tasks and rules. Because the rakefile idiom tends to
leave off parentheses on the task/file/rule methods, unusual
ambiguities can arise when using curly braces.
For example, suppose that the method +object_files+ returns a list of
object files in a project. Now we use +object_files+ as the
prerequisites in a rule specified with actions in curly braces.
# DON'T DO THIS!
file "prog" => object_files {
# Actions are expected here (but it doesn't work)!
}
Because curly braces have a higher precedence than +do+/+end+, the
block is associated with the +object_files+ method rather than the
+file+ method.
This is the proper way to specify the task ...
# THIS IS FINE
file "prog" => object_files do
# Actions go here
end
== Rakefile Path
When issuing the +rake+ command in a terminal, Rake will look
for a Rakefile in the current directory. If a Rakefile is not found,
it will search parent directories until one is found.
For example, if a Rakefile resides in the +project/+ directory,
moving deeper into the project's directory tree will not have an adverse
effect on rake tasks:
$ pwd
/home/user/project
$ cd lib/foo/bar
$ pwd
/home/user/project/lib/foo/bar
$ rake run_pwd
/home/user/project
As far as rake is concerned, all tasks are run from the directory in
which the Rakefile resides.
=== Multiple Rake Files
Not all tasks need to be included in a single Rakefile. Additional
rake files (with the file extension "+.rake+") may be placed in
+rakelib+ directory located at the top level of a project (i.e.
the same directory that contains the main +Rakefile+).
Also, rails projects may include additional rake files in the
+lib/tasks+ directory.
=== Clean and Clobber Tasks
Through <tt>require 'rake/clean'</tt> Rake provides +clean+ and +clobber+
tasks:
+clean+ ::
Clean up the project by deleting scratch files and backup files. Add files
to the +CLEAN+ FileList to have the +clean+ target handle them.
+clobber+ ::
Clobber all generated and non-source files in a project. The task depends
on +clean+, so all the +CLEAN+ files will be deleted as well as files in the
+CLOBBER+ FileList. The intent of this task is to return a project to its
pristine, just unpacked state.
You can add file names or glob patterns to both the +CLEAN+ and +CLOBBER+
lists.
=== Phony Task
The phony task can be used as a dependency to allow file-based tasks to use
non-file-based-tasks as prerequisites without forcing them to rebuild. You
can <tt>require 'rake/phony'</tt> to add the +phony+ task.
----
== See
* README.rdoc -- Main documentation for Rake.
Mini Shell