Current File : //proc/thread-self/root/proc/self/root/opt/alt/php71/usr/lib64/build/libtool.m4
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
#
# Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc.
# Written by Gordon Matzigkeit, 1996
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
m4_define([_LT_COPYING], [dnl
# Copyright (C) 2014 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions. There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# GNU Libtool is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of of the License, or
# (at your option) any later version.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program or library that is built
# using GNU Libtool, you may include this file under the same
# distribution terms that you use for the rest of that program.
#
# GNU Libtool is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
])
# serial 58 LT_INIT
# LT_PREREQ(VERSION)
# ------------------
# Complain and exit if this libtool version is less that VERSION.
m4_defun([LT_PREREQ],
[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
[m4_default([$3],
[m4_fatal([Libtool version $1 or higher is required],
63)])],
[$2])])
# _LT_CHECK_BUILDDIR
# ------------------
# Complain if the absolute build directory name contains unusual characters
m4_defun([_LT_CHECK_BUILDDIR],
[case `pwd` in
*\ * | *\ *)
AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
esac
])
# LT_INIT([OPTIONS])
# ------------------
AC_DEFUN([LT_INIT],
[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK
AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
AC_BEFORE([$0], [LT_LANG])dnl
AC_BEFORE([$0], [LT_OUTPUT])dnl
AC_BEFORE([$0], [LTDL_INIT])dnl
m4_require([_LT_CHECK_BUILDDIR])dnl
dnl Autoconf doesn't catch unexpanded LT_ macros by default:
m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
dnl unless we require an AC_DEFUNed macro:
AC_REQUIRE([LTOPTIONS_VERSION])dnl
AC_REQUIRE([LTSUGAR_VERSION])dnl
AC_REQUIRE([LTVERSION_VERSION])dnl
AC_REQUIRE([LTOBSOLETE_VERSION])dnl
m4_require([_LT_PROG_LTMAIN])dnl
_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
dnl Parse OPTIONS
_LT_SET_OPTIONS([$0], [$1])
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS=$ltmain
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl
_LT_SETUP
# Only expand once:
m4_define([LT_INIT])
])# LT_INIT
# Old names:
AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
# _LT_PREPARE_CC_BASENAME
# -----------------------
m4_defun([_LT_PREPARE_CC_BASENAME], [
# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
func_cc_basename ()
{
for cc_temp in @S|@*""; do
case $cc_temp in
compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
\-*) ;;
*) break;;
esac
done
func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
}
])# _LT_PREPARE_CC_BASENAME
# _LT_CC_BASENAME(CC)
# -------------------
# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME,
# but that macro is also expanded into generated libtool script, which
# arranges for $SED and $ECHO to be set by different means.
m4_defun([_LT_CC_BASENAME],
[m4_require([_LT_PREPARE_CC_BASENAME])dnl
AC_REQUIRE([_LT_DECL_SED])dnl
AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
func_cc_basename $1
cc_basename=$func_cc_basename_result
])
# _LT_FILEUTILS_DEFAULTS
# ----------------------
# It is okay to use these file commands and assume they have been set
# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'.
m4_defun([_LT_FILEUTILS_DEFAULTS],
[: ${CP="cp -f"}
: ${MV="mv -f"}
: ${RM="rm -f"}
])# _LT_FILEUTILS_DEFAULTS
# _LT_SETUP
# ---------
m4_defun([_LT_SETUP],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
dnl
_LT_DECL([], [host_alias], [0], [The host system])dnl
_LT_DECL([], [host], [0])dnl
_LT_DECL([], [host_os], [0])dnl
dnl
_LT_DECL([], [build_alias], [0], [The build system])dnl
_LT_DECL([], [build], [0])dnl
_LT_DECL([], [build_os], [0])dnl
dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([LT_PATH_LD])dnl
AC_REQUIRE([LT_PATH_NM])dnl
dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
test -z "$LN_S" && LN_S="ln -s"
_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
dnl
AC_REQUIRE([LT_CMD_MAX_LEN])dnl
_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_CHECK_SHELL_FEATURES])dnl
m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
m4_require([_LT_CMD_RELOAD])dnl
m4_require([_LT_CHECK_MAGIC_METHOD])dnl
m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
m4_require([_LT_CMD_OLD_ARCHIVE])dnl
m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
m4_require([_LT_WITH_SYSROOT])dnl
m4_require([_LT_CMD_TRUNCATE])dnl
_LT_CONFIG_LIBTOOL_INIT([
# See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes INIT.
if test -n "\${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
])
if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
_LT_CHECK_OBJDIR
m4_require([_LT_TAG_COMPILER])dnl
case $host_os in
aix3*)
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
;;
esac
# Global variables:
ofile=libtool
can_build_shared=yes
# All known linkers require a '.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
with_gnu_ld=$lt_cv_prog_gnu_ld
old_CC=$CC
old_CFLAGS=$CFLAGS
# Set sane defaults for various variables
test -z "$CC" && CC=cc
test -z "$LTCC" && LTCC=$CC
test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
test -z "$LD" && LD=ld
test -z "$ac_objext" && ac_objext=o
_LT_CC_BASENAME([$compiler])
# Only perform the check for file, if the check method requires it
test -z "$MAGIC_CMD" && MAGIC_CMD=file
case $deplibs_check_method in
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
_LT_PATH_MAGIC
fi
;;
esac
# Use C for the default configuration in the libtool script
LT_SUPPORTED_TAG([CC])
_LT_LANG_C_CONFIG
_LT_LANG_DEFAULT_CONFIG
_LT_CONFIG_COMMANDS
])# _LT_SETUP
# _LT_PREPARE_SED_QUOTE_VARS
# --------------------------
# Define a few sed substitution that help us do robust quoting.
m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
[# Backslashify metacharacters that are still active within
# double-quoted strings.
sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
# Same as above, but do not quote variable references.
double_quote_subst='s/\([["`\\]]\)/\\\1/g'
# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
# Sed substitution to delay expansion of an escaped single quote.
delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
# Sed substitution to avoid accidental globbing in evaled expressions
no_glob_subst='s/\*/\\\*/g'
])
# _LT_PROG_LTMAIN
# ---------------
# Note that this code is called both from 'configure', and 'config.status'
# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
# 'config.status' has no value for ac_aux_dir unless we are using Automake,
# so we pass a copy along to make sure it has a sensible value anyway.
m4_defun([_LT_PROG_LTMAIN],
[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
ltmain=$ac_aux_dir/ltmain.sh
])# _LT_PROG_LTMAIN
## ------------------------------------- ##
## Accumulate code for creating libtool. ##
## ------------------------------------- ##
# So that we can recreate a full libtool script including additional
# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
# in macros and then make a single call at the end using the 'libtool'
# label.
# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
# ----------------------------------------
# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
m4_define([_LT_CONFIG_LIBTOOL_INIT],
[m4_ifval([$1],
[m4_append([_LT_OUTPUT_LIBTOOL_INIT],
[$1
])])])
# Initialize.
m4_define([_LT_OUTPUT_LIBTOOL_INIT])
# _LT_CONFIG_LIBTOOL([COMMANDS])
# ------------------------------
# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
m4_define([_LT_CONFIG_LIBTOOL],
[m4_ifval([$1],
[m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
[$1
])])])
# Initialize.
m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
# -----------------------------------------------------
m4_defun([_LT_CONFIG_SAVE_COMMANDS],
[_LT_CONFIG_LIBTOOL([$1])
_LT_CONFIG_LIBTOOL_INIT([$2])
])
# _LT_FORMAT_COMMENT([COMMENT])
# -----------------------------
# Add leading comment marks to the start of each line, and a trailing
# full-stop to the whole comment if one is not present already.
m4_define([_LT_FORMAT_COMMENT],
[m4_ifval([$1], [
m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
[['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
)])
## ------------------------ ##
## FIXME: Eliminate VARNAME ##
## ------------------------ ##
# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
# -------------------------------------------------------------------
# CONFIGNAME is the name given to the value in the libtool script.
# VARNAME is the (base) name used in the configure script.
# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
# VARNAME. Any other value will be used directly.
m4_define([_LT_DECL],
[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
[lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
[m4_ifval([$1], [$1], [$2])])
lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
m4_ifval([$4],
[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
lt_dict_add_subkey([lt_decl_dict], [$2],
[tagged?], [m4_ifval([$5], [yes], [no])])])
])
# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
# --------------------------------------------------------
m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
# ------------------------------------------------
m4_define([lt_decl_tag_varnames],
[_lt_decl_filter([tagged?], [yes], $@)])
# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
# ---------------------------------------------------------
m4_define([_lt_decl_filter],
[m4_case([$#],
[0], [m4_fatal([$0: too few arguments: $#])],
[1], [m4_fatal([$0: too few arguments: $#: $1])],
[2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
[3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
[lt_dict_filter([lt_decl_dict], $@)])[]dnl
])
# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
# --------------------------------------------------
m4_define([lt_decl_quote_varnames],
[_lt_decl_filter([value], [1], $@)])
# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
# ---------------------------------------------------
m4_define([lt_decl_dquote_varnames],
[_lt_decl_filter([value], [2], $@)])
# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
# ---------------------------------------------------
m4_define([lt_decl_varnames_tagged],
[m4_assert([$# <= 2])dnl
_$0(m4_quote(m4_default([$1], [[, ]])),
m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
m4_define([_lt_decl_varnames_tagged],
[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
# ------------------------------------------------
m4_define([lt_decl_all_varnames],
[_$0(m4_quote(m4_default([$1], [[, ]])),
m4_if([$2], [],
m4_quote(lt_decl_varnames),
m4_quote(m4_shift($@))))[]dnl
])
m4_define([_lt_decl_all_varnames],
[lt_join($@, lt_decl_varnames_tagged([$1],
lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
])
# _LT_CONFIG_STATUS_DECLARE([VARNAME])
# ------------------------------------
# Quote a variable value, and forward it to 'config.status' so that its
# declaration there will have the same value as in 'configure'. VARNAME
# must have a single quote delimited value for this to work.
m4_define([_LT_CONFIG_STATUS_DECLARE],
[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
# _LT_CONFIG_STATUS_DECLARATIONS
# ------------------------------
# We delimit libtool config variables with single quotes, so when
# we write them to config.status, we have to be sure to quote all
# embedded single quotes properly. In configure, this macro expands
# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
#
# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
[m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
# _LT_LIBTOOL_TAGS
# ----------------
# Output comment and list of tags supported by the script
m4_defun([_LT_LIBTOOL_TAGS],
[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
available_tags='_LT_TAGS'dnl
])
# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
# -----------------------------------
# Extract the dictionary values for VARNAME (optionally with TAG) and
# expand to a commented shell variable setting:
#
# # Some comment about what VAR is for.
# visible_name=$lt_internal_name
m4_define([_LT_LIBTOOL_DECLARE],
[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
[description])))[]dnl
m4_pushdef([_libtool_name],
m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
[0], [_libtool_name=[$]$1],
[1], [_libtool_name=$lt_[]$1],
[2], [_libtool_name=$lt_[]$1],
[_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
])
# _LT_LIBTOOL_CONFIG_VARS
# -----------------------
# Produce commented declarations of non-tagged libtool config variables
# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool'
# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
# section) are produced by _LT_LIBTOOL_TAG_VARS.
m4_defun([_LT_LIBTOOL_CONFIG_VARS],
[m4_foreach([_lt_var],
m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
[m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
# _LT_LIBTOOL_TAG_VARS(TAG)
# -------------------------
m4_define([_LT_LIBTOOL_TAG_VARS],
[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
[m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
# _LT_TAGVAR(VARNAME, [TAGNAME])
# ------------------------------
m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
# _LT_CONFIG_COMMANDS
# -------------------
# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
# variables for single and double quote escaping we saved from calls
# to _LT_DECL, we can put quote escaped variables declarations
# into 'config.status', and then the shell code to quote escape them in
# for loops in 'config.status'. Finally, any additional code accumulated
# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
m4_defun([_LT_CONFIG_COMMANDS],
[AC_PROVIDE_IFELSE([LT_OUTPUT],
dnl If the libtool generation code has been placed in $CONFIG_LT,
dnl instead of duplicating it all over again into config.status,
dnl then we will have config.status run $CONFIG_LT later, so it
dnl needs to know what name is stored there:
[AC_CONFIG_COMMANDS([libtool],
[$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
dnl If the libtool generation code is destined for config.status,
dnl expand the accumulated commands and init code now:
[AC_CONFIG_COMMANDS([libtool],
[_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
])#_LT_CONFIG_COMMANDS
# Initialize.
m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
[
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
sed_quote_subst='$sed_quote_subst'
double_quote_subst='$double_quote_subst'
delay_variable_subst='$delay_variable_subst'
_LT_CONFIG_STATUS_DECLARATIONS
LTCC='$LTCC'
LTCFLAGS='$LTCFLAGS'
compiler='$compiler_DEFAULT'
# A function that is used when there is no print builtin or printf.
func_fallback_echo ()
{
eval 'cat <<_LTECHO_EOF
\$[]1
_LTECHO_EOF'
}
# Quote evaled strings.
for var in lt_decl_all_varnames([[ \
]], lt_decl_quote_varnames); do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
;;
esac
done
# Double-quote double-evaled strings.
for var in lt_decl_all_varnames([[ \
]], lt_decl_dquote_varnames); do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
;;
esac
done
_LT_OUTPUT_LIBTOOL_INIT
])
# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
# ------------------------------------
# Generate a child script FILE with all initialization necessary to
# reuse the environment learned by the parent script, and make the
# file executable. If COMMENT is supplied, it is inserted after the
# '#!' sequence but before initialization text begins. After this
# macro, additional text can be appended to FILE to form the body of
# the child script. The macro ends with non-zero status if the
# file could not be fully written (such as if the disk is full).
m4_ifdef([AS_INIT_GENERATED],
[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
[m4_defun([_LT_GENERATED_FILE_INIT],
[m4_require([AS_PREPARE])]dnl
[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
[lt_write_fail=0
cat >$1 <<_ASEOF || lt_write_fail=1
#! $SHELL
# Generated by $as_me.
$2
SHELL=\${CONFIG_SHELL-$SHELL}
export SHELL
_ASEOF
cat >>$1 <<\_ASEOF || lt_write_fail=1
AS_SHELL_SANITIZE
_AS_PREPARE
exec AS_MESSAGE_FD>&1
_ASEOF
test 0 = "$lt_write_fail" && chmod +x $1[]dnl
m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
# LT_OUTPUT
# ---------
# This macro allows early generation of the libtool script (before
# AC_OUTPUT is called), incase it is used in configure for compilation
# tests.
AC_DEFUN([LT_OUTPUT],
[: ${CONFIG_LT=./config.lt}
AC_MSG_NOTICE([creating $CONFIG_LT])
_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
[# Run this file to recreate a libtool stub with the current configuration.])
cat >>"$CONFIG_LT" <<\_LTEOF
lt_cl_silent=false
exec AS_MESSAGE_LOG_FD>>config.log
{
echo
AS_BOX([Running $as_me.])
} >&AS_MESSAGE_LOG_FD
lt_cl_help="\
'$as_me' creates a local libtool stub from the current configuration,
for use in further configure time tests before the real libtool is
generated.
Usage: $[0] [[OPTIONS]]
-h, --help print this help, then exit
-V, --version print version number, then exit
-q, --quiet do not print progress messages
-d, --debug don't remove temporary files
Report bugs to <bug-libtool@gnu.org>."
lt_cl_version="\
m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
configured by $[0], generated by m4_PACKAGE_STRING.
Copyright (C) 2011 Free Software Foundation, Inc.
This config.lt script is free software; the Free Software Foundation
gives unlimited permision to copy, distribute and modify it."
while test 0 != $[#]
do
case $[1] in
--version | --v* | -V )
echo "$lt_cl_version"; exit 0 ;;
--help | --h* | -h )
echo "$lt_cl_help"; exit 0 ;;
--debug | --d* | -d )
debug=: ;;
--quiet | --q* | --silent | --s* | -q )
lt_cl_silent=: ;;
-*) AC_MSG_ERROR([unrecognized option: $[1]
Try '$[0] --help' for more information.]) ;;
*) AC_MSG_ERROR([unrecognized argument: $[1]
Try '$[0] --help' for more information.]) ;;
esac
shift
done
if $lt_cl_silent; then
exec AS_MESSAGE_FD>/dev/null
fi
_LTEOF
cat >>"$CONFIG_LT" <<_LTEOF
_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
_LTEOF
cat >>"$CONFIG_LT" <<\_LTEOF
AC_MSG_NOTICE([creating $ofile])
_LT_OUTPUT_LIBTOOL_COMMANDS
AS_EXIT(0)
_LTEOF
chmod +x "$CONFIG_LT"
# configure is writing to config.log, but config.lt does its own redirection,
# appending to config.log, which fails on DOS, as config.log is still kept
# open by configure. Here we exec the FD to /dev/null, effectively closing
# config.log, so it can be properly (re)opened and appended to by config.lt.
lt_cl_success=:
test yes = "$silent" &&
lt_config_lt_args="$lt_config_lt_args --quiet"
exec AS_MESSAGE_LOG_FD>/dev/null
$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
exec AS_MESSAGE_LOG_FD>>config.log
$lt_cl_success || AS_EXIT(1)
])# LT_OUTPUT
# _LT_CONFIG(TAG)
# ---------------
# If TAG is the built-in tag, create an initial libtool script with a
# default configuration from the untagged config vars. Otherwise add code
# to config.status for appending the configuration named by TAG from the
# matching tagged config vars.
m4_defun([_LT_CONFIG],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
_LT_CONFIG_SAVE_COMMANDS([
m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
m4_if(_LT_TAG, [C], [
# See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes.
if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
cfgfile=${ofile}T
trap "$RM \"$cfgfile\"; exit 1" 1 2 15
$RM "$cfgfile"
cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
# Generated automatically by $as_me ($PACKAGE) $VERSION
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
# Provide generalized library-building support services.
# Written by Gordon Matzigkeit, 1996
_LT_COPYING
_LT_LIBTOOL_TAGS
# Configured defaults for sys_lib_dlsearch_path munging.
: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
# ### BEGIN LIBTOOL CONFIG
_LT_LIBTOOL_CONFIG_VARS
_LT_LIBTOOL_TAG_VARS
# ### END LIBTOOL CONFIG
_LT_EOF
cat <<'_LT_EOF' >> "$cfgfile"
# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
_LT_PREPARE_MUNGE_PATH_LIST
_LT_PREPARE_CC_BASENAME
# ### END FUNCTIONS SHARED WITH CONFIGURE
_LT_EOF
case $host_os in
aix3*)
cat <<\_LT_EOF >> "$cfgfile"
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
_LT_EOF
;;
esac
_LT_PROG_LTMAIN
# We use sed instead of cat because bash on DJGPP gets confused if
# if finds mixed CR/LF and LF-only lines. Since sed operates in
# text mode, it properly converts lines to CR/LF. This bash problem
# is reportedly fixed, but why not run on old versions too?
sed '$q' "$ltmain" >> "$cfgfile" \
|| (rm -f "$cfgfile"; exit 1)
mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
],
[cat <<_LT_EOF >> "$ofile"
dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
dnl in a comment (ie after a #).
# ### BEGIN LIBTOOL TAG CONFIG: $1
_LT_LIBTOOL_TAG_VARS(_LT_TAG)
# ### END LIBTOOL TAG CONFIG: $1
_LT_EOF
])dnl /m4_if
],
[m4_if([$1], [], [
PACKAGE='$PACKAGE'
VERSION='$VERSION'
RM='$RM'
ofile='$ofile'], [])
])dnl /_LT_CONFIG_SAVE_COMMANDS
])# _LT_CONFIG
# LT_SUPPORTED_TAG(TAG)
# ---------------------
# Trace this macro to discover what tags are supported by the libtool
# --tag option, using:
# autoconf --trace 'LT_SUPPORTED_TAG:$1'
AC_DEFUN([LT_SUPPORTED_TAG], [])
# C support is built-in for now
m4_define([_LT_LANG_C_enabled], [])
m4_define([_LT_TAGS], [])
# LT_LANG(LANG)
# -------------
# Enable libtool support for the given language if not already enabled.
AC_DEFUN([LT_LANG],
[AC_BEFORE([$0], [LT_OUTPUT])dnl
m4_case([$1],
[C], [_LT_LANG(C)],
[C++], [_LT_LANG(CXX)],
[Go], [_LT_LANG(GO)],
[Java], [_LT_LANG(GCJ)],
[Fortran 77], [_LT_LANG(F77)],
[Fortran], [_LT_LANG(FC)],
[Windows Resource], [_LT_LANG(RC)],
[m4_ifdef([_LT_LANG_]$1[_CONFIG],
[_LT_LANG($1)],
[m4_fatal([$0: unsupported language: "$1"])])])dnl
])# LT_LANG
# _LT_LANG(LANGNAME)
# ------------------
m4_defun([_LT_LANG],
[m4_ifdef([_LT_LANG_]$1[_enabled], [],
[LT_SUPPORTED_TAG([$1])dnl
m4_append([_LT_TAGS], [$1 ])dnl
m4_define([_LT_LANG_]$1[_enabled], [])dnl
_LT_LANG_$1_CONFIG($1)])dnl
])# _LT_LANG
m4_ifndef([AC_PROG_GO], [
############################################################
# NOTE: This macro has been submitted for inclusion into #
# GNU Autoconf as AC_PROG_GO. When it is available in #
# a released version of Autoconf we should remove this #
# macro and use it instead. #
############################################################
m4_defun([AC_PROG_GO],
[AC_LANG_PUSH(Go)dnl
AC_ARG_VAR([GOC], [Go compiler command])dnl
AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
_AC_ARG_VAR_LDFLAGS()dnl
AC_CHECK_TOOL(GOC, gccgo)
if test -z "$GOC"; then
if test -n "$ac_tool_prefix"; then
AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
fi
fi
if test -z "$GOC"; then
AC_CHECK_PROG(GOC, gccgo, gccgo, false)
fi
])#m4_defun
])#m4_ifndef
# _LT_LANG_DEFAULT_CONFIG
# -----------------------
m4_defun([_LT_LANG_DEFAULT_CONFIG],
[AC_PROVIDE_IFELSE([AC_PROG_CXX],
[LT_LANG(CXX)],
[m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
AC_PROVIDE_IFELSE([AC_PROG_F77],
[LT_LANG(F77)],
[m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
AC_PROVIDE_IFELSE([AC_PROG_FC],
[LT_LANG(FC)],
[m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
dnl pulling things in needlessly.
AC_PROVIDE_IFELSE([AC_PROG_GCJ],
[LT_LANG(GCJ)],
[AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
[LT_LANG(GCJ)],
[AC_PROVIDE_IFELSE([LT_PROG_GCJ],
[LT_LANG(GCJ)],
[m4_ifdef([AC_PROG_GCJ],
[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
m4_ifdef([A][M_PROG_GCJ],
[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
m4_ifdef([LT_PROG_GCJ],
[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
AC_PROVIDE_IFELSE([AC_PROG_GO],
[LT_LANG(GO)],
[m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
AC_PROVIDE_IFELSE([LT_PROG_RC],
[LT_LANG(RC)],
[m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
])# _LT_LANG_DEFAULT_CONFIG
# Obsolete macros:
AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
dnl AC_DEFUN([AC_LIBTOOL_F77], [])
dnl AC_DEFUN([AC_LIBTOOL_FC], [])
dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
dnl AC_DEFUN([AC_LIBTOOL_RC], [])
# _LT_TAG_COMPILER
# ----------------
m4_defun([_LT_TAG_COMPILER],
[AC_REQUIRE([AC_PROG_CC])dnl
_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}
# If no C compiler flags were specified, use CFLAGS.
LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
# Allow CC to be a program name with arguments.
compiler=$CC
])# _LT_TAG_COMPILER
# _LT_COMPILER_BOILERPLATE
# ------------------------
# Check for compiler boilerplate output or warnings with
# the simple compiler test code.
m4_defun([_LT_COMPILER_BOILERPLATE],
[m4_require([_LT_DECL_SED])dnl
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" >conftest.$ac_ext
eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_compiler_boilerplate=`cat conftest.err`
$RM conftest*
])# _LT_COMPILER_BOILERPLATE
# _LT_LINKER_BOILERPLATE
# ----------------------
# Check for linker boilerplate output or warnings with
# the simple link test code.
m4_defun([_LT_LINKER_BOILERPLATE],
[m4_require([_LT_DECL_SED])dnl
ac_outfile=conftest.$ac_objext
echo "$lt_simple_link_test_code" >conftest.$ac_ext
eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
_lt_linker_boilerplate=`cat conftest.err`
$RM -r conftest*
])# _LT_LINKER_BOILERPLATE
# _LT_REQUIRED_DARWIN_CHECKS
# -------------------------
m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
case $host_os in
rhapsody* | darwin*)
AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
AC_CHECK_TOOL([LIPO], [lipo], [:])
AC_CHECK_TOOL([OTOOL], [otool], [:])
AC_CHECK_TOOL([OTOOL64], [otool64], [:])
_LT_DECL([], [DSYMUTIL], [1],
[Tool to manipulate archived DWARF debug symbol files on Mac OS X])
_LT_DECL([], [NMEDIT], [1],
[Tool to change global to local symbols on Mac OS X])
_LT_DECL([], [LIPO], [1],
[Tool to manipulate fat objects and archives on Mac OS X])
_LT_DECL([], [OTOOL], [1],
[ldd/readelf like tool for Mach-O binaries on Mac OS X])
_LT_DECL([], [OTOOL64], [1],
[ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
[lt_cv_apple_cc_single_mod=no
if test -z "$LT_MULTI_MODULE"; then
# By default we will add the -single_module flag. You can override
# by either setting the environment variable LT_MULTI_MODULE
# non-empty at configure time, or by adding -multi_module to the
# link flags.
rm -rf libconftest.dylib*
echo "int foo(void){return 1;}" > conftest.c
echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-dynamiclib -Wl,-single_module conftest.c 2>conftest.err
_lt_result=$?
# If there is a non-empty error log, and "single_module"
# appears in it, assume the flag caused a linker warning
if test -s conftest.err && $GREP single_module conftest.err; then
cat conftest.err >&AS_MESSAGE_LOG_FD
# Otherwise, if the output was created with a 0 exit code from
# the compiler, it worked.
elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
lt_cv_apple_cc_single_mod=yes
else
cat conftest.err >&AS_MESSAGE_LOG_FD
fi
rm -rf libconftest.dylib*
rm -f conftest.*
fi])
AC_CACHE_CHECK([for -exported_symbols_list linker flag],
[lt_cv_ld_exported_symbols_list],
[lt_cv_ld_exported_symbols_list=no
save_LDFLAGS=$LDFLAGS
echo "_main" > conftest.sym
LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
[lt_cv_ld_exported_symbols_list=yes],
[lt_cv_ld_exported_symbols_list=no])
LDFLAGS=$save_LDFLAGS
])
AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
[lt_cv_ld_force_load=no
cat > conftest.c << _LT_EOF
int forced_loaded() { return 2;}
_LT_EOF
echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
$LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
$AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
$RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
cat > conftest.c << _LT_EOF
int main() { return 0;}
_LT_EOF
echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
_lt_result=$?
if test -s conftest.err && $GREP force_load conftest.err; then
cat conftest.err >&AS_MESSAGE_LOG_FD
elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
lt_cv_ld_force_load=yes
else
cat conftest.err >&AS_MESSAGE_LOG_FD
fi
rm -f conftest.err libconftest.a conftest conftest.c
rm -rf conftest.dSYM
])
case $host_os in
rhapsody* | darwin1.[[012]])
_lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
darwin1.*)
_lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
darwin*) # darwin 5.x on
# if running on 10.5 or later, the deployment target defaults
# to the OS version, if on x86, and 10.4, the deployment
# target defaults to 10.4. Don't you love it?
case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
_lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
10.[[012]][[,.]]*)
_lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
10.*)
_lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
esac
;;
esac
if test yes = "$lt_cv_apple_cc_single_mod"; then
_lt_dar_single_mod='$single_module'
fi
if test yes = "$lt_cv_ld_exported_symbols_list"; then
_lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
else
_lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
fi
if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
_lt_dsymutil='~$DSYMUTIL $lib || :'
else
_lt_dsymutil=
fi
;;
esac
])
# _LT_DARWIN_LINKER_FEATURES([TAG])
# ---------------------------------
# Checks for linker and compiler features on darwin
m4_defun([_LT_DARWIN_LINKER_FEATURES],
[
m4_require([_LT_REQUIRED_DARWIN_CHECKS])
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
if test yes = "$lt_cv_ld_force_load"; then
_LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
[FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes])
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=''
fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined
case $cc_basename in
ifort*|nagfor*) _lt_dar_can_shared=yes ;;
*) _lt_dar_can_shared=$GCC ;;
esac
if test yes = "$_lt_dar_can_shared"; then
output_verbose_link_cmd=func_echo_all
_LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
_LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
_LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
_LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
m4_if([$1], [CXX],
[ if test yes != "$lt_cv_apple_cc_single_mod"; then
_LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
_LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
fi
],[])
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
])
# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
# ----------------------------------
# Links a minimal program and checks the executable
# for the system default hardcoded library path. In most cases,
# this is /usr/lib:/lib, but when the MPI compilers are used
# the location of the communication and MPI libs are included too.
# If we don't find anything, use the default library path according
# to the aix ld manual.
# Store the results from the different compilers for each TAGNAME.
# Allow to override them for all tags through lt_cv_aix_libpath.
m4_defun([_LT_SYS_MODULE_PATH_AIX],
[m4_require([_LT_DECL_SED])dnl
if test set = "${lt_cv_aix_libpath+set}"; then
aix_libpath=$lt_cv_aix_libpath
else
AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
[AC_LINK_IFELSE([AC_LANG_PROGRAM],[
lt_aix_libpath_sed='[
/Import File Strings/,/^$/ {
/^0/ {
s/^0 *\([^ ]*\) *$/\1/
p
}
}]'
_LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
# Check for a 64-bit object if we didn't find anything.
if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
_LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
fi],[])
if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
_LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib
fi
])
aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
fi
])# _LT_SYS_MODULE_PATH_AIX
# _LT_SHELL_INIT(ARG)
# -------------------
m4_define([_LT_SHELL_INIT],
[m4_divert_text([M4SH-INIT], [$1
])])# _LT_SHELL_INIT
# _LT_PROG_ECHO_BACKSLASH
# -----------------------
# Find how we can fake an echo command that does not interpret backslash.
# In particular, with Autoconf 2.60 or later we add some code to the start
# of the generated configure script that will find a shell with a builtin
# printf (that we can use as an echo command).
m4_defun([_LT_PROG_ECHO_BACKSLASH],
[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
AC_MSG_CHECKING([how to print strings])
# Test print first, because it will be a builtin if present.
if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
ECHO='print -r --'
elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
ECHO='printf %s\n'
else
# Use this function as a fallback that always works.
func_fallback_echo ()
{
eval 'cat <<_LTECHO_EOF
$[]1
_LTECHO_EOF'
}
ECHO='func_fallback_echo'
fi
# func_echo_all arg...
# Invoke $ECHO with all args, space-separated.
func_echo_all ()
{
$ECHO "$*"
}
case $ECHO in
printf*) AC_MSG_RESULT([printf]) ;;
print*) AC_MSG_RESULT([print -r]) ;;
*) AC_MSG_RESULT([cat]) ;;
esac
m4_ifdef([_AS_DETECT_SUGGESTED],
[_AS_DETECT_SUGGESTED([
test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
PATH=/empty FPATH=/empty; export PATH FPATH
test "X`printf %s $ECHO`" = "X$ECHO" \
|| test "X`print -r -- $ECHO`" = "X$ECHO" )])])
_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
])# _LT_PROG_ECHO_BACKSLASH
# _LT_WITH_SYSROOT
# ----------------
AC_DEFUN([_LT_WITH_SYSROOT],
[AC_MSG_CHECKING([for sysroot])
AC_ARG_WITH([sysroot],
[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@],
[Search for dependent libraries within DIR (or the compiler's sysroot
if not specified).])],
[], [with_sysroot=no])
dnl lt_sysroot will always be passed unquoted. We quote it here
dnl in case the user passed a directory name.
lt_sysroot=
case $with_sysroot in #(
yes)
if test yes = "$GCC"; then
lt_sysroot=`$CC --print-sysroot 2>/dev/null`
fi
;; #(
/*)
lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
;; #(
no|'')
;; #(
*)
AC_MSG_RESULT([$with_sysroot])
AC_MSG_ERROR([The sysroot must be an absolute path.])
;;
esac
AC_MSG_RESULT([${lt_sysroot:-no}])
_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
[dependent libraries, and where our libraries should be installed.])])
# _LT_ENABLE_LOCK
# ---------------
m4_defun([_LT_ENABLE_LOCK],
[AC_ARG_ENABLE([libtool-lock],
[AS_HELP_STRING([--disable-libtool-lock],
[avoid locking (might break parallel builds)])])
test no = "$enable_libtool_lock" || enable_libtool_lock=yes
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
ia64-*-hpux*)
# Find out what ABI is being produced by ac_compile, and set mode
# options accordingly.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.$ac_objext` in
*ELF-32*)
HPUX_IA64_MODE=32
;;
*ELF-64*)
HPUX_IA64_MODE=64
;;
esac
fi
rm -rf conftest*
;;
*-*-irix6*)
# Find out what ABI is being produced by ac_compile, and set linker
# options accordingly.
echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
if test yes = "$lt_cv_prog_gnu_ld"; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -melf32bsmip"
;;
*N32*)
LD="${LD-ld} -melf32bmipn32"
;;
*64-bit*)
LD="${LD-ld} -melf64bmip"
;;
esac
else
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
fi
rm -rf conftest*
;;
mips64*-*linux*)
# Find out what ABI is being produced by ac_compile, and set linker
# options accordingly.
echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
emul=elf
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
emul="${emul}32"
;;
*64-bit*)
emul="${emul}64"
;;
esac
case `/usr/bin/file conftest.$ac_objext` in
*MSB*)
emul="${emul}btsmip"
;;
*LSB*)
emul="${emul}ltsmip"
;;
esac
case `/usr/bin/file conftest.$ac_objext` in
*N32*)
emul="${emul}n32"
;;
esac
LD="${LD-ld} -m $emul"
fi
rm -rf conftest*
;;
x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
# Find out what ABI is being produced by ac_compile, and set linker
# options accordingly. Note that the listed cases only cover the
# situations where additional linker options are needed (such as when
# doing 32-bit compilation for a host where ld defaults to 64-bit, or
# vice versa); the common cases where no linker options are needed do
# not appear in the list.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
*32-bit*)
case $host in
x86_64-*kfreebsd*-gnu)
LD="${LD-ld} -m elf_i386_fbsd"
;;
x86_64-*linux*)
case `/usr/bin/file conftest.o` in
*x86-64*)
LD="${LD-ld} -m elf32_x86_64"
;;
*)
LD="${LD-ld} -m elf_i386"
;;
esac
;;
powerpc64le-*linux*)
LD="${LD-ld} -m elf32lppclinux"
;;
powerpc64-*linux*)
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
LD="${LD-ld} -m elf_s390"
;;
sparc64-*linux*)
LD="${LD-ld} -m elf32_sparc"
;;
esac
;;
*64-bit*)
case $host in
x86_64-*kfreebsd*-gnu)
LD="${LD-ld} -m elf_x86_64_fbsd"
;;
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
powerpcle-*linux*)
LD="${LD-ld} -m elf64lppc"
;;
powerpc-*linux*)
LD="${LD-ld} -m elf64ppc"
;;
s390*-*linux*|s390*-*tpf*)
LD="${LD-ld} -m elf64_s390"
;;
sparc*-*linux*)
LD="${LD-ld} -m elf64_sparc"
;;
esac
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_LANG_PUSH(C)
AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
AC_LANG_POP])
if test yes != "$lt_cv_cc_needs_belf"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS=$SAVE_CFLAGS
fi
;;
*-*solaris*)
# Find out what ABI is being produced by ac_compile, and set linker
# options accordingly.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
*64-bit*)
case $lt_cv_prog_gnu_ld in
yes*)
case $host in
i?86-*-solaris*|x86_64-*-solaris*)
LD="${LD-ld} -m elf_x86_64"
;;
sparc*-*-solaris*)
LD="${LD-ld} -m elf64_sparc"
;;
esac
# GNU ld 2.21 introduced _sol2 emulations. Use them if available.
if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
LD=${LD-ld}_sol2
fi
;;
*)
if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
LD="${LD-ld} -64"
fi
;;
esac
;;
esac
fi
rm -rf conftest*
;;
esac
need_locks=$enable_libtool_lock
])# _LT_ENABLE_LOCK
# _LT_PROG_AR
# -----------
m4_defun([_LT_PROG_AR],
[AC_CHECK_TOOLS(AR, [ar], false)
: ${AR=ar}
: ${AR_FLAGS=cru}
_LT_DECL([], [AR], [1], [The archiver])
_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
[lt_cv_ar_at_file=no
AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
[echo conftest.$ac_objext > conftest.lst
lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
AC_TRY_EVAL([lt_ar_try])
if test 0 -eq "$ac_status"; then
# Ensure the archiver fails upon bogus file names.
rm -f conftest.$ac_objext libconftest.a
AC_TRY_EVAL([lt_ar_try])
if test 0 -ne "$ac_status"; then
lt_cv_ar_at_file=@
fi
fi
rm -f conftest.* libconftest.a
])
])
if test no = "$lt_cv_ar_at_file"; then
archiver_list_spec=
else
archiver_list_spec=$lt_cv_ar_at_file
fi
_LT_DECL([], [archiver_list_spec], [1],
[How to feed a file listing to the archiver])
])# _LT_PROG_AR
# _LT_CMD_OLD_ARCHIVE
# -------------------
m4_defun([_LT_CMD_OLD_ARCHIVE],
[_LT_PROG_AR
AC_CHECK_TOOL(STRIP, strip, :)
test -z "$STRIP" && STRIP=:
_LT_DECL([], [STRIP], [1], [A symbol stripping program])
AC_CHECK_TOOL(RANLIB, ranlib, :)
test -z "$RANLIB" && RANLIB=:
_LT_DECL([], [RANLIB], [1],
[Commands used to install an old-style archive])
# Determine commands to create old-style static archives.
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=
if test -n "$RANLIB"; then
case $host_os in
bitrig* | openbsd*)
old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
;;
*)
old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
;;
esac
old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
fi
case $host_os in
darwin*)
lock_old_archive_extraction=yes ;;
*)
lock_old_archive_extraction=no ;;
esac
_LT_DECL([], [old_postinstall_cmds], [2])
_LT_DECL([], [old_postuninstall_cmds], [2])
_LT_TAGDECL([], [old_archive_cmds], [2],
[Commands used to build an old-style archive])
_LT_DECL([], [lock_old_archive_extraction], [0],
[Whether to use a lock for old archive extraction])
])# _LT_CMD_OLD_ARCHIVE
# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
# ----------------------------------------------------------------
# Check whether the given compiler option works
AC_DEFUN([_LT_COMPILER_OPTION],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_SED])dnl
AC_CACHE_CHECK([$1], [$2],
[$2=no
m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="$3" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&AS_MESSAGE_LOG_FD
echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
$ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
$2=yes
fi
fi
$RM conftest*
])
if test yes = "[$]$2"; then
m4_if([$5], , :, [$5])
else
m4_if([$6], , :, [$6])
fi
])# _LT_COMPILER_OPTION
# Old name:
AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
# [ACTION-SUCCESS], [ACTION-FAILURE])
# ----------------------------------------------------
# Check whether the given linker option works
AC_DEFUN([_LT_LINKER_OPTION],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_SED])dnl
AC_CACHE_CHECK([$1], [$2],
[$2=no
save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS $3"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
# The linker can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&AS_MESSAGE_LOG_FD
$ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if diff conftest.exp conftest.er2 >/dev/null; then
$2=yes
fi
else
$2=yes
fi
fi
$RM -r conftest*
LDFLAGS=$save_LDFLAGS
])
if test yes = "[$]$2"; then
m4_if([$4], , :, [$4])
else
m4_if([$5], , :, [$5])
fi
])# _LT_LINKER_OPTION
# Old name:
AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
# LT_CMD_MAX_LEN
#---------------
AC_DEFUN([LT_CMD_MAX_LEN],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
# find the maximum length of command line arguments
AC_MSG_CHECKING([the maximum length of command line arguments])
AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
i=0
teststring=ABCD
case $build_os in
msdosdjgpp*)
# On DJGPP, this test can blow up pretty badly due to problems in libc
# (any single argument exceeding 2000 bytes causes a buffer overrun
# during glob expansion). Even if it were fixed, the result of this
# check would be larger than it should be.
lt_cv_sys_max_cmd_len=12288; # 12K is about right
;;
gnu*)
# Under GNU Hurd, this test is not required because there is
# no limit to the length of command line arguments.
# Libtool will interpret -1 as no limit whatsoever
lt_cv_sys_max_cmd_len=-1;
;;
cygwin* | mingw* | cegcc*)
# On Win9x/ME, this test blows up -- it succeeds, but takes
# about 5 minutes as the teststring grows exponentially.
# Worse, since 9x/ME are not pre-emptively multitasking,
# you end up with a "frozen" computer, even though with patience
# the test eventually succeeds (with a max line length of 256k).
# Instead, let's just punt: use the minimum linelength reported by
# all of the supported platforms: 8192 (on NT/2K/XP).
lt_cv_sys_max_cmd_len=8192;
;;
mint*)
# On MiNT this can take a long time and run out of memory.
lt_cv_sys_max_cmd_len=8192;
;;
amigaos*)
# On AmigaOS with pdksh, this test takes hours, literally.
# So we just punt and use a minimum line length of 8192.
lt_cv_sys_max_cmd_len=8192;
;;
bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
# This has been around since 386BSD, at least. Likely further.
if test -x /sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
elif test -x /usr/sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
else
lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
fi
# And add a safety zone
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
;;
interix*)
# We know the value 262144 and hardcode it with a safety zone (like BSD)
lt_cv_sys_max_cmd_len=196608
;;
os2*)
# The test takes a long time on OS/2.
lt_cv_sys_max_cmd_len=8192
;;
osf*)
# Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
# due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
# nice to cause kernel panics so lets avoid the loop below.
# First set a reasonable default.
lt_cv_sys_max_cmd_len=16384
#
if test -x /sbin/sysconfig; then
case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
*1*) lt_cv_sys_max_cmd_len=-1 ;;
esac
fi
;;
sco3.2v5*)
lt_cv_sys_max_cmd_len=102400
;;
sysv5* | sco5v6* | sysv4.2uw2*)
kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
if test -n "$kargmax"; then
lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
else
lt_cv_sys_max_cmd_len=32768
fi
;;
*)
lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
if test -n "$lt_cv_sys_max_cmd_len" && \
test undefined != "$lt_cv_sys_max_cmd_len"; then
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
else
# Make teststring a little bigger before we do anything with it.
# a 1K string should be a reasonable start.
for i in 1 2 3 4 5 6 7 8; do
teststring=$teststring$teststring
done
SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
while { test X`env echo "$teststring$teststring" 2>/dev/null` \
= "X$teststring$teststring"; } >/dev/null 2>&1 &&
test 17 != "$i" # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
done
# Only check the string length outside the loop.
lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
teststring=
# Add a significant safety factor because C++ compilers can tack on
# massive amounts of additional arguments before passing them to the
# linker. It appears as though 1/2 is a usable value.
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
fi
;;
esac
])
if test -n "$lt_cv_sys_max_cmd_len"; then
AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
else
AC_MSG_RESULT(none)
fi
max_cmd_len=$lt_cv_sys_max_cmd_len
_LT_DECL([], [max_cmd_len], [0],
[What is the maximum length of a command?])
])# LT_CMD_MAX_LEN
# Old name:
AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
# _LT_HEADER_DLFCN
# ----------------
m4_defun([_LT_HEADER_DLFCN],
[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
])# _LT_HEADER_DLFCN
# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
# ----------------------------------------------------------------
m4_defun([_LT_TRY_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
if test yes = "$cross_compiling"; then :
[$4]
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
[#line $LINENO "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif
#include <stdio.h>
#ifdef RTLD_GLOBAL
# define LT_DLGLOBAL RTLD_GLOBAL
#else
# ifdef DL_GLOBAL
# define LT_DLGLOBAL DL_GLOBAL
# else
# define LT_DLGLOBAL 0
# endif
#endif
/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
# ifdef RTLD_LAZY
# define LT_DLLAZY_OR_NOW RTLD_LAZY
# else
# ifdef DL_LAZY
# define LT_DLLAZY_OR_NOW DL_LAZY
# else
# ifdef RTLD_NOW
# define LT_DLLAZY_OR_NOW RTLD_NOW
# else
# ifdef DL_NOW
# define LT_DLLAZY_OR_NOW DL_NOW
# else
# define LT_DLLAZY_OR_NOW 0
# endif
# endif
# endif
# endif
#endif
/* When -fvisibility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
int fnord () __attribute__((visibility("default")));
#endif
int fnord () { return 42; }
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
int status = $lt_dlunknown;
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
else
{
if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
else puts (dlerror ());
}
/* dlclose (self); */
}
else
puts (dlerror ());
return status;
}]
_LT_EOF
if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then
(./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) $1 ;;
x$lt_dlneed_uscore) $2 ;;
x$lt_dlunknown|x*) $3 ;;
esac
else :
# compilation failed
$3
fi
fi
rm -fr conftest*
])# _LT_TRY_DLOPEN_SELF
# LT_SYS_DLOPEN_SELF
# ------------------
AC_DEFUN([LT_SYS_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
if test yes != "$enable_dlopen"; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
else
lt_cv_dlopen=no
lt_cv_dlopen_libs=
case $host_os in
beos*)
lt_cv_dlopen=load_add_on
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
mingw* | pw32* | cegcc*)
lt_cv_dlopen=LoadLibrary
lt_cv_dlopen_libs=
;;
cygwin*)
lt_cv_dlopen=dlopen
lt_cv_dlopen_libs=
;;
darwin*)
# if libdl is installed we need to link against it
AC_CHECK_LIB([dl], [dlopen],
[lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[
lt_cv_dlopen=dyld
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
])
;;
tpf*)
# Don't try to run any link tests for TPF. We know it's impossible
# because TPF is a cross-compiler, and we know how we open DSOs.
lt_cv_dlopen=dlopen
lt_cv_dlopen_libs=
lt_cv_dlopen_self=no
;;
*)
AC_CHECK_FUNC([shl_load],
[lt_cv_dlopen=shl_load],
[AC_CHECK_LIB([dld], [shl_load],
[lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld],
[AC_CHECK_FUNC([dlopen],
[lt_cv_dlopen=dlopen],
[AC_CHECK_LIB([dl], [dlopen],
[lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],
[AC_CHECK_LIB([svld], [dlopen],
[lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld],
[AC_CHECK_LIB([dld], [dld_link],
[lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld])
])
])
])
])
])
;;
esac
if test no = "$lt_cv_dlopen"; then
enable_dlopen=no
else
enable_dlopen=yes
fi
case $lt_cv_dlopen in
dlopen)
save_CPPFLAGS=$CPPFLAGS
test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
save_LDFLAGS=$LDFLAGS
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
save_LIBS=$LIBS
LIBS="$lt_cv_dlopen_libs $LIBS"
AC_CACHE_CHECK([whether a program can dlopen itself],
lt_cv_dlopen_self, [dnl
_LT_TRY_DLOPEN_SELF(
lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
])
if test yes = "$lt_cv_dlopen_self"; then
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
lt_cv_dlopen_self_static, [dnl
_LT_TRY_DLOPEN_SELF(
lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
])
fi
CPPFLAGS=$save_CPPFLAGS
LDFLAGS=$save_LDFLAGS
LIBS=$save_LIBS
;;
esac
case $lt_cv_dlopen_self in
yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
*) enable_dlopen_self=unknown ;;
esac
case $lt_cv_dlopen_self_static in
yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
*) enable_dlopen_self_static=unknown ;;
esac
fi
_LT_DECL([dlopen_support], [enable_dlopen], [0],
[Whether dlopen is supported])
_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
[Whether dlopen of programs is supported])
_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
[Whether dlopen of statically linked programs is supported])
])# LT_SYS_DLOPEN_SELF
# Old name:
AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
# _LT_COMPILER_C_O([TAGNAME])
# ---------------------------
# Check to see if options -c and -o are simultaneously supported by compiler.
# This macro does not hard code the compiler like AC_PROG_CC_C_O.
m4_defun([_LT_COMPILER_C_O],
[m4_require([_LT_DECL_SED])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_TAG_COMPILER])dnl
AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
[_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
[_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
$RM -r conftest 2>/dev/null
mkdir conftest
cd conftest
mkdir out
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&AS_MESSAGE_LOG_FD
echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
$ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
fi
fi
chmod u+w . 2>&AS_MESSAGE_LOG_FD
$RM conftest*
# SGI C++ compiler will create directory out/ii_files/ for
# template instantiation
test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
$RM out/* && rmdir out
cd ..
$RM -r conftest
$RM conftest*
])
_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
[Does compiler simultaneously support -c and -o options?])
])# _LT_COMPILER_C_O
# _LT_COMPILER_FILE_LOCKS([TAGNAME])
# ----------------------------------
# Check to see if we can do hard links to lock some files if needed
m4_defun([_LT_COMPILER_FILE_LOCKS],
[m4_require([_LT_ENABLE_LOCK])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
_LT_COMPILER_C_O([$1])
hard_links=nottested
if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then
# do not overwrite the value of need_locks provided by the user
AC_MSG_CHECKING([if we can lock with hard links])
hard_links=yes
$RM conftest*
ln conftest.a conftest.b 2>/dev/null && hard_links=no
touch conftest.a
ln conftest.a conftest.b 2>&5 || hard_links=no
ln conftest.a conftest.b 2>/dev/null && hard_links=no
AC_MSG_RESULT([$hard_links])
if test no = "$hard_links"; then
AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe])
need_locks=warn
fi
else
need_locks=no
fi
_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
])# _LT_COMPILER_FILE_LOCKS
# _LT_CHECK_OBJDIR
# ----------------
m4_defun([_LT_CHECK_OBJDIR],
[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
[rm -f .libs 2>/dev/null
mkdir .libs 2>/dev/null
if test -d .libs; then
lt_cv_objdir=.libs
else
# MS-DOS does not allow filenames that begin with a dot.
lt_cv_objdir=_libs
fi
rmdir .libs 2>/dev/null])
objdir=$lt_cv_objdir
_LT_DECL([], [objdir], [0],
[The name of the directory that contains temporary libtool files])dnl
m4_pattern_allow([LT_OBJDIR])dnl
AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/",
[Define to the sub-directory where libtool stores uninstalled libraries.])
])# _LT_CHECK_OBJDIR
# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
# --------------------------------------
# Check hardcoding attributes.
m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
[AC_MSG_CHECKING([how to hardcode library paths into programs])
_LT_TAGVAR(hardcode_action, $1)=
if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
test -n "$_LT_TAGVAR(runpath_var, $1)" ||
test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then
# We can hardcode non-existent directories.
if test no != "$_LT_TAGVAR(hardcode_direct, $1)" &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" &&
test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then
# Linking always hardcodes the temporary library directory.
_LT_TAGVAR(hardcode_action, $1)=relink
else
# We can link without hardcoding, and we can hardcode nonexisting dirs.
_LT_TAGVAR(hardcode_action, $1)=immediate
fi
else
# We cannot hardcode anything, or else we can only hardcode existing
# directories.
_LT_TAGVAR(hardcode_action, $1)=unsupported
fi
AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
if test relink = "$_LT_TAGVAR(hardcode_action, $1)" ||
test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then
# Fast installation is not supported
enable_fast_install=no
elif test yes = "$shlibpath_overrides_runpath" ||
test no = "$enable_shared"; then
# Fast installation is not necessary
enable_fast_install=needless
fi
_LT_TAGDECL([], [hardcode_action], [0],
[How to hardcode a shared library path into an executable])
])# _LT_LINKER_HARDCODE_LIBPATH
# _LT_CMD_STRIPLIB
# ----------------
m4_defun([_LT_CMD_STRIPLIB],
[m4_require([_LT_DECL_EGREP])
striplib=
old_striplib=
AC_MSG_CHECKING([whether stripping libraries is possible])
if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
test -z "$striplib" && striplib="$STRIP --strip-unneeded"
AC_MSG_RESULT([yes])
else
# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
darwin*)
if test -n "$STRIP"; then
striplib="$STRIP -x"
old_striplib="$STRIP -S"
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
;;
*)
AC_MSG_RESULT([no])
;;
esac
fi
_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
_LT_DECL([], [striplib], [1])
])# _LT_CMD_STRIPLIB
# _LT_PREPARE_MUNGE_PATH_LIST
# ---------------------------
# Make sure func_munge_path_list() is defined correctly.
m4_defun([_LT_PREPARE_MUNGE_PATH_LIST],
[[# func_munge_path_list VARIABLE PATH
# -----------------------------------
# VARIABLE is name of variable containing _space_ separated list of
# directories to be munged by the contents of PATH, which is string
# having a format:
# "DIR[:DIR]:"
# string "DIR[ DIR]" will be prepended to VARIABLE
# ":DIR[:DIR]"
# string "DIR[ DIR]" will be appended to VARIABLE
# "DIRP[:DIRP]::[DIRA:]DIRA"
# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
# "DIRA[ DIRA]" will be appended to VARIABLE
# "DIR[:DIR]"
# VARIABLE will be replaced by "DIR[ DIR]"
func_munge_path_list ()
{
case x@S|@2 in
x)
;;
*:)
eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\"
;;
x:*)
eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\"
;;
*::*)
eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\"
;;
*)
eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\"
;;
esac
}
]])# _LT_PREPARE_PATH_LIST
# _LT_SYS_DYNAMIC_LINKER([TAG])
# -----------------------------
# PORTME Fill in your ld.so characteristics
m4_defun([_LT_SYS_DYNAMIC_LINKER],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_OBJDUMP])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_CHECK_SHELL_FEATURES])dnl
m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl
AC_MSG_CHECKING([dynamic linker characteristics])
m4_if([$1],
[], [
if test yes = "$GCC"; then
case $host_os in
darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
*) lt_awk_arg='/^libraries:/' ;;
esac
case $host_os in
mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;;
*) lt_sed_strip_eq='s|=/|/|g' ;;
esac
lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
case $lt_search_path_spec in
*\;*)
# if the path contains ";" then we assume it to be the separator
# otherwise default to the standard path separator (i.e. ":") - it is
# assumed that no part of a normal pathname contains ";" but that should
# okay in the real world where ";" in dirpaths is itself problematic.
lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
;;
*)
lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
;;
esac
# Ok, now we have the path, separated by spaces, we can step through it
# and add multilib dir if necessary...
lt_tmp_lt_search_path_spec=
lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
# ...but if some path component already ends with the multilib dir we assume
# that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
case "$lt_multi_os_dir; $lt_search_path_spec " in
"/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
lt_multi_os_dir=
;;
esac
for lt_sys_path in $lt_search_path_spec; do
if test -d "$lt_sys_path$lt_multi_os_dir"; then
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
elif test -n "$lt_multi_os_dir"; then
test -d "$lt_sys_path" && \
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
BEGIN {RS = " "; FS = "/|\n";} {
lt_foo = "";
lt_count = 0;
for (lt_i = NF; lt_i > 0; lt_i--) {
if ($lt_i != "" && $lt_i != ".") {
if ($lt_i == "..") {
lt_count++;
} else {
if (lt_count == 0) {
lt_foo = "/" $lt_i lt_foo;
} else {
lt_count--;
}
}
}
}
if (lt_foo != "") { lt_freq[[lt_foo]]++; }
if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
}'`
# AWK program above erroneously prepends '/' to C:/dos/paths
# for these hosts.
case $host_os in
mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
$SED 's|/\([[A-Za-z]]:\)|\1|g'` ;;
esac
sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
fi])
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext_cmds=.so
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
need_lib_prefix=unknown
hardcode_into_libs=no
# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
need_version=unknown
AC_ARG_VAR([LT_SYS_LIBRARY_PATH],
[User-defined run-time library search path.])
case $host_os in
aix3*)
version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX 3 has no versioning support, so we append a major version to the name.
soname_spec='$libname$release$shared_ext$major'
;;
aix[[4-9]]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
if test ia64 = "$host_cpu"; then
# AIX 5 supports IA64
library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
# the line '#! .'. This would cause the generated library to
# depend on '.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[[01]] | aix4.[[01]].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
fi
;;
esac
# Using Import Files as archive members, it is possible to support
# filename-based versioning of shared library archives on AIX. While
# this would work for both with and without runtime linking, it will
# prevent static linking of such archives. So we do filename-based
# shared library versioning with .so extension only, which is used
# when both runtime linking and shared linking is enabled.
# Unfortunately, runtime linking may impact performance, so we do
# not want this to be the default eventually. Also, we use the
# versioned .so libs for executables only if there is the -brtl
# linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
# To allow for filename-based versioning support, we need to create
# libNAME.so.V as an archive file, containing:
# *) an Import File, referring to the versioned filename of the
# archive as well as the shared archive member, telling the
# bitwidth (32 or 64) of that shared object, and providing the
# list of exported symbols of that shared object, eventually
# decorated with the 'weak' keyword
# *) the shared object with the F_LOADONLY flag set, to really avoid
# it being seen by the linker.
# At run time we better use the real file rather than another symlink,
# but for link time we create the symlink libNAME.so -> libNAME.so.V
case $with_aix_soname,$aix_use_runtimelinking in
# AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
aix,yes) # traditional libtool
dynamic_linker='AIX unversionable lib.so'
# If using run time linking (on AIX 4.2 or later) use lib<name>.so
# instead of lib<name>.a to let people know that these are not
# typical AIX shared libraries.
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
;;
aix,no) # traditional AIX only
dynamic_linker='AIX lib.a[(]lib.so.V[)]'
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
library_names_spec='$libname$release.a $libname.a'
soname_spec='$libname$release$shared_ext$major'
;;
svr4,*) # full svr4 only
dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]"
library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
# We do not specify a path in Import Files, so LIBPATH fires.
shlibpath_overrides_runpath=yes
;;
*,yes) # both, prefer svr4
dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]"
library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
# unpreferred sharedlib libNAME.a needs extra handling
postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
# We do not specify a path in Import Files, so LIBPATH fires.
shlibpath_overrides_runpath=yes
;;
*,no) # both, prefer aix
dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]"
library_names_spec='$libname$release.a $libname.a'
soname_spec='$libname$release$shared_ext$major'
# unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
;;
esac
shlibpath_var=LIBPATH
fi
;;
amigaos*)
case $host_cpu in
powerpc)
# Since July 2007 AmigaOS4 officially supports .so libraries.
# When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
;;
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
beos*)
library_names_spec='$libname$shared_ext'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
bsdi[[45]]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
# the default ld.so.conf also contains /usr/contrib/lib and
# /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
# libtool to hard-code these into programs
;;
cygwin* | mingw* | pw32* | cegcc*)
version_type=windows
shrext_cmds=.dll
need_version=no
need_lib_prefix=no
case $GCC,$cc_basename in
yes,*)
# gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \$file`~
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
chmod a+x \$dldir/$dlname~
if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
fi'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$RM \$dlpath'
shlibpath_overrides_runpath=yes
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
m4_if([$1], [],[
sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
;;
esac
dynamic_linker='Win32 ld.exe'
;;
*,cl*)
# Native MSVC
libname_spec='$name'
soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
library_names_spec='$libname.dll.lib'
case $build_os in
mingw*)
sys_lib_search_path_spec=
lt_save_ifs=$IFS
IFS=';'
for lt_path in $LIB
do
IFS=$lt_save_ifs
# Let DOS variable expansion print the short 8.3 style file name.
lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
done
IFS=$lt_save_ifs
# Convert to MSYS style.
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
;;
cygwin*)
# Convert to unix form, then to dos form, then back to unix form
# but this time dos style (no spaces!) so that the unix form looks
# like /cygdrive/c/PROGRA~1:/cygdr...
sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
;;
*)
sys_lib_search_path_spec=$LIB
if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
# It is most probably a Windows format PATH.
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
else
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
fi
# FIXME: find the short name or the path components, as spaces are
# common. (e.g. "Program Files" -> "PROGRA~1")
;;
esac
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \$file`~
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$RM \$dlpath'
shlibpath_overrides_runpath=yes
dynamic_linker='Win32 link.exe'
;;
*)
# Assume MSVC wrapper
library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib'
dynamic_linker='Win32 ld.exe'
;;
esac
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
darwin* | rhapsody*)
dynamic_linker="$host_os dyld"
version_type=darwin
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
soname_spec='$libname$release$major$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
m4_if([$1], [],[
sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
dgux*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
if test -x /usr/bin/objformat; then
objformat=`/usr/bin/objformat`
else
case $host_os in
freebsd[[23]].*) objformat=aout ;;
*) objformat=elf ;;
esac
fi
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
need_version=yes
;;
esac
shlibpath_var=LD_LIBRARY_PATH
case $host_os in
freebsd2.*)
shlibpath_overrides_runpath=yes
;;
freebsd3.[[01]]* | freebsdelf3.[[01]]*)
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
*) # from 4.6 on, and DragonFly
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
esac
;;
haiku*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
dynamic_linker="$host_os runtime_loader"
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LIBRARY_PATH
shlibpath_overrides_runpath=no
sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
hardcode_into_libs=yes
;;
hpux9* | hpux10* | hpux11*)
# Give a soname corresponding to the major version so that dld.sl refuses to
# link against other versions.
version_type=sunos
need_lib_prefix=no
need_version=no
case $host_cpu in
ia64*)
shrext_cmds='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
if test 32 = "$HPUX_IA64_MODE"; then
sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
sys_lib_dlsearch_path_spec=/usr/lib/hpux32
else
sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
sys_lib_dlsearch_path_spec=/usr/lib/hpux64
fi
;;
hppa*64*)
shrext_cmds='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext_cmds='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
;;
esac
# HP-UX runs *really* slowly unless shared libraries are mode 555, ...
postinstall_cmds='chmod 555 $lib'
# or fails outright, so override atomically:
install_override_mode=555
;;
interix[[3-9]]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
irix5* | irix6* | nonstopux*)
case $host_os in
nonstopux*) version_type=nonstopux ;;
*)
if test yes = "$lt_cv_prog_gnu_ld"; then
version_type=linux # correct to gnu/linux during the next big refactor
else
version_type=irix
fi ;;
esac
need_lib_prefix=no
need_version=no
soname_spec='$libname$release$shared_ext$major'
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
;;
*)
case $LD in # libtool.m4 will add one of these switches to LD
*-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
libsuff= shlibsuff= libmagic=32-bit;;
*-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
libsuff=32 shlibsuff=N32 libmagic=N32;;
*-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
libsuff=64 shlibsuff=64 libmagic=64-bit;;
*) libsuff= shlibsuff= libmagic=never-match;;
esac
;;
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
hardcode_into_libs=yes
;;
# No shared lib support for Linux oldld, aout, or coff.
linux*oldld* | linux*aout* | linux*coff*)
dynamic_linker=no
;;
linux*android*)
version_type=none # Android doesn't support versioned libraries.
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext'
soname_spec='$libname$release$shared_ext'
finish_cmds=
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
hardcode_into_libs=yes
dynamic_linker='Android linker'
# Don't embed -rpath directories since the linker doesn't support them.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
;;
# This must be glibc/ELF.
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
# Some binutils ld are patched to set DT_RUNPATH
AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
[lt_cv_shlibpath_overrides_runpath=no
save_LDFLAGS=$LDFLAGS
save_libdir=$libdir
eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
[AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
[lt_cv_shlibpath_overrides_runpath=yes])])
LDFLAGS=$save_LDFLAGS
libdir=$save_libdir
])
shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
hardcode_into_libs=yes
# Add ABI-specific directories to the system library path.
sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
# Ideally, we could use ldconfig to report *all* directores which are
# searched for libraries, however this is still not possible. Aside from not
# being certain /sbin/ldconfig is available, command
# 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
# even though it is searched at run-time. Try to do the best guess by
# appending ld.so.conf contents (and includes) to the search path.
if test -f /etc/ld.so.conf; then
lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
;;
netbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
newsos6)
version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
*nto* | *qnx*)
version_type=qnx
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
dynamic_linker='ldqnx.so'
;;
openbsd* | bitrig*)
version_type=sunos
sys_lib_dlsearch_path_spec=/usr/lib
need_lib_prefix=no
if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
need_version=no
else
need_version=yes
fi
library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
os2*)
libname_spec='$name'
version_type=windows
shrext_cmds=.dll
need_version=no
need_lib_prefix=no
# OS/2 can only load a DLL with a base name of 8 characters or less.
soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
v=$($ECHO $release$versuffix | tr -d .-);
n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
$ECHO $n$v`$shared_ext'
library_names_spec='${libname}_dll.$libext'
dynamic_linker='OS/2 ld.exe'
shlibpath_var=BEGINLIBPATH
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
postinstall_cmds='base_file=`basename \$file`~
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
chmod a+x \$dldir/$dlname~
if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
fi'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
dlpath=$dir/\$dldll~
$RM \$dlpath'
;;
osf3* | osf4* | osf5*)
version_type=osf
need_lib_prefix=no
need_version=no
soname_spec='$libname$release$shared_ext$major'
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
rdos*)
dynamic_linker=no
;;
solaris*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
# ldd complains unless libraries are executable
postinstall_cmds='chmod +x $lib'
;;
sunos4*)
version_type=sunos
library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
if test yes = "$with_gnu_ld"; then
need_lib_prefix=no
fi
need_version=yes
;;
sysv4 | sysv4.3*)
version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
shlibpath_overrides_runpath=no
need_lib_prefix=no
runpath_var=LD_RUN_PATH
;;
siemens)
need_lib_prefix=no
;;
motorola)
need_lib_prefix=no
need_version=no
shlibpath_overrides_runpath=no
sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
;;
esac
;;
sysv4*MP*)
if test -d /usr/nec; then
version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
soname_spec='$libname$shared_ext.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
version_type=sco
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
if test yes = "$with_gnu_ld"; then
sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
else
sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
case $host_os in
sco3.2v5*)
sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
;;
esac
fi
sys_lib_dlsearch_path_spec='/usr/lib'
;;
tpf*)
# TPF is a cross-target only. Preferred cross-host = GNU/Linux.
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
uts4*)
version_type=linux # correct to gnu/linux during the next big refactor
library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
*)
dynamic_linker=no
;;
esac
AC_MSG_RESULT([$dynamic_linker])
test no = "$dynamic_linker" && can_build_shared=no
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
if test yes = "$GCC"; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
fi
if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
fi
# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
_LT_DECL([], [variables_saved_for_relink], [1],
[Variables whose values should be saved in libtool wrapper scripts and
restored at link time])
_LT_DECL([], [need_lib_prefix], [0],
[Do we need the "lib" prefix for modules?])
_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
_LT_DECL([], [version_type], [0], [Library versioning type])
_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
_LT_DECL([], [shlibpath_overrides_runpath], [0],
[Is shlibpath searched before the hard-coded library search path?])
_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
_LT_DECL([], [library_names_spec], [1],
[[List of archive names. First name is the real one, the rest are links.
The last name is the one that the linker finds with -lNAME]])
_LT_DECL([], [soname_spec], [1],
[[The coded name of the library, if different from the real name]])
_LT_DECL([], [install_override_mode], [1],
[Permission mode override for installation of shared libraries])
_LT_DECL([], [postinstall_cmds], [2],
[Command to use after installation of a shared archive])
_LT_DECL([], [postuninstall_cmds], [2],
[Command to use after uninstallation of a shared archive])
_LT_DECL([], [finish_cmds], [2],
[Commands used to finish a libtool library installation in a directory])
_LT_DECL([], [finish_eval], [1],
[[As "finish_cmds", except a single script fragment to be evaled but
not shown]])
_LT_DECL([], [hardcode_into_libs], [0],
[Whether we should hardcode library paths into libraries])
_LT_DECL([], [sys_lib_search_path_spec], [2],
[Compile-time system search path for libraries])
_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2],
[Detected run-time system search path for libraries])
_LT_DECL([], [configure_time_lt_sys_library_path], [2],
[Explicit LT_SYS_LIBRARY_PATH set during ./configure time])
])# _LT_SYS_DYNAMIC_LINKER
# _LT_PATH_TOOL_PREFIX(TOOL)
# --------------------------
# find a file program that can recognize shared library
AC_DEFUN([_LT_PATH_TOOL_PREFIX],
[m4_require([_LT_DECL_EGREP])dnl
AC_MSG_CHECKING([for $1])
AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
[case $MAGIC_CMD in
[[\\/*] | ?:[\\/]*])
lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
;;
*)
lt_save_MAGIC_CMD=$MAGIC_CMD
lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
dnl $ac_dummy forces splitting on constant user-supplied paths.
dnl POSIX.2 word splitting is done only on the output of word expansions,
dnl not every word. This closes a longstanding sh security hole.
ac_dummy="m4_if([$2], , $PATH, [$2])"
for ac_dir in $ac_dummy; do
IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$1"; then
lt_cv_path_MAGIC_CMD=$ac_dir/"$1"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
else
cat <<_LT_EOF 1>&2
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such. This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem. Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org
_LT_EOF
fi ;;
esac
fi
break
fi
done
IFS=$lt_save_ifs
MAGIC_CMD=$lt_save_MAGIC_CMD
;;
esac])
MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
AC_MSG_RESULT($MAGIC_CMD)
else
AC_MSG_RESULT(no)
fi
_LT_DECL([], [MAGIC_CMD], [0],
[Used to examine libraries when file_magic_cmd begins with "file"])dnl
])# _LT_PATH_TOOL_PREFIX
# Old name:
AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
# _LT_PATH_MAGIC
# --------------
# find a file program that can recognize a shared library
m4_defun([_LT_PATH_MAGIC],
[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
_LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
else
MAGIC_CMD=:
fi
fi
])# _LT_PATH_MAGIC
# LT_PATH_LD
# ----------
# find the pathname to the GNU or non-GNU linker
AC_DEFUN([LT_PATH_LD],
[AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
AC_ARG_WITH([gnu-ld],
[AS_HELP_STRING([--with-gnu-ld],
[assume the C compiler uses GNU ld @<:@default=no@:>@])],
[test no = "$withval" || with_gnu_ld=yes],
[with_gnu_ld=no])dnl
ac_prog=ld
if test yes = "$GCC"; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by $CC])
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return, which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
esac
case $ac_prog in
# Accept absolute paths.
[[\\/]]* | ?:[[\\/]]*)
re_direlt='/[[^/]][[^/]]*/\.\./'
# Canonicalize the pathname of ld
ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
test -z "$LD" && LD=$ac_prog
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test yes = "$with_gnu_ld"; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(lt_cv_path_LD,
[if test -z "$LD"; then
lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD=$ac_dir/$ac_prog
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
test no != "$with_gnu_ld" && break
;;
*)
test yes != "$with_gnu_ld" && break
;;
esac
fi
done
IFS=$lt_save_ifs
else
lt_cv_path_LD=$LD # Let the user override the test with a path.
fi])
LD=$lt_cv_path_LD
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
_LT_PATH_LD_GNU
AC_SUBST([LD])
_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
])# LT_PATH_LD
# Old names:
AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AM_PROG_LD], [])
dnl AC_DEFUN([AC_PROG_LD], [])
# _LT_PATH_LD_GNU
#- --------------
m4_defun([_LT_PATH_LD_GNU],
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU lds only accept -v.
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
lt_cv_prog_gnu_ld=yes
;;
*)
lt_cv_prog_gnu_ld=no
;;
esac])
with_gnu_ld=$lt_cv_prog_gnu_ld
])# _LT_PATH_LD_GNU
# _LT_CMD_RELOAD
# --------------
# find reload flag for linker
# -- PORTME Some linkers may need a different reload flag.
m4_defun([_LT_CMD_RELOAD],
[AC_CACHE_CHECK([for $LD option to reload object files],
lt_cv_ld_reload_flag,
[lt_cv_ld_reload_flag='-r'])
reload_flag=$lt_cv_ld_reload_flag
case $reload_flag in
"" | " "*) ;;
*) reload_flag=" $reload_flag" ;;
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
if test yes != "$GCC"; then
reload_cmds=false
fi
;;
darwin*)
if test yes = "$GCC"; then
reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
else
reload_cmds='$LD$reload_flag -o $output$reload_objs'
fi
;;
esac
_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
_LT_TAGDECL([], [reload_cmds], [2])dnl
])# _LT_CMD_RELOAD
# _LT_PATH_DD
# -----------
# find a working dd
m4_defun([_LT_PATH_DD],
[AC_CACHE_CHECK([for a working dd], [ac_cv_path_lt_DD],
[printf 0123456789abcdef0123456789abcdef >conftest.i
cat conftest.i conftest.i >conftest2.i
: ${lt_DD:=$DD}
AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd],
[if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
cmp -s conftest.i conftest.out \
&& ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
fi])
rm -f conftest.i conftest2.i conftest.out])
])# _LT_PATH_DD
# _LT_CMD_TRUNCATE
# ----------------
# find command to truncate a binary pipe
m4_defun([_LT_CMD_TRUNCATE],
[m4_require([_LT_PATH_DD])
AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin],
[printf 0123456789abcdef0123456789abcdef >conftest.i
cat conftest.i conftest.i >conftest2.i
lt_cv_truncate_bin=
if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
cmp -s conftest.i conftest.out \
&& lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
fi
rm -f conftest.i conftest2.i conftest.out
test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"])
_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1],
[Command to truncate a binary pipe])
])# _LT_CMD_TRUNCATE
# _LT_CHECK_MAGIC_METHOD
# ----------------------
# how to check for library dependencies
# -- PORTME fill in with the dynamic library characteristics
m4_defun([_LT_CHECK_MAGIC_METHOD],
[m4_require([_LT_DECL_EGREP])
m4_require([_LT_DECL_OBJDUMP])
AC_CACHE_CHECK([how to recognize dependent libraries],
lt_cv_deplibs_check_method,
[lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
# 'unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
# that responds to the $file_magic_cmd with a given extended regex.
# If you have 'file' or equivalent on your system and you're not sure
# whether 'pass_all' will *always* work, you probably want this one.
case $host_os in
aix[[4-9]]*)
lt_cv_deplibs_check_method=pass_all
;;
beos*)
lt_cv_deplibs_check_method=pass_all
;;
bsdi[[45]]*)
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
lt_cv_file_magic_cmd='/usr/bin/file -L'
lt_cv_file_magic_test_file=/shlib/libc.so
;;
cygwin*)
# func_win32_libid is a shell function defined in ltmain.sh
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
;;
mingw* | pw32*)
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump',
# unless we find 'file', for example because we are cross-compiling.
if ( file / ) >/dev/null 2>&1; then
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
# Keep this pattern in sync with the one in func_win32_libid.
lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
lt_cv_file_magic_cmd='$OBJDUMP -f'
fi
;;
cegcc*)
# use the weaker test based on 'objdump'. See mingw*.
lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
lt_cv_file_magic_cmd='$OBJDUMP -f'
;;
darwin* | rhapsody*)
lt_cv_deplibs_check_method=pass_all
;;
freebsd* | dragonfly*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
case $host_cpu in
i*86 )
# Not sure whether the presence of OpenBSD here was a mistake.
# Let's accept both of them until this is cleared up.
lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
;;
esac
else
lt_cv_deplibs_check_method=pass_all
fi
;;
haiku*)
lt_cv_deplibs_check_method=pass_all
;;
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
case $host_cpu in
ia64*)
lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
;;
hppa*64*)
[lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
;;
*)
lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
lt_cv_file_magic_test_file=/usr/lib/libc.sl
;;
esac
;;
interix[[3-9]]*)
# PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
;;
irix5* | irix6* | nonstopux*)
case $LD in
*-32|*"-32 ") libmagic=32-bit;;
*-n32|*"-n32 ") libmagic=N32;;
*-64|*"-64 ") libmagic=64-bit;;
*) libmagic=never-match;;
esac
lt_cv_deplibs_check_method=pass_all
;;
# This must be glibc/ELF.
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
lt_cv_deplibs_check_method=pass_all
;;
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
fi
;;
newos6*)
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=/usr/lib/libnls.so
;;
*nto* | *qnx*)
lt_cv_deplibs_check_method=pass_all
;;
openbsd* | bitrig*)
if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
fi
;;
osf3* | osf4* | osf5*)
lt_cv_deplibs_check_method=pass_all
;;
rdos*)
lt_cv_deplibs_check_method=pass_all
;;
solaris*)
lt_cv_deplibs_check_method=pass_all
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
lt_cv_deplibs_check_method=pass_all
;;
sysv4 | sysv4.3*)
case $host_vendor in
motorola)
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
;;
ncr)
lt_cv_deplibs_check_method=pass_all
;;
sequent)
lt_cv_file_magic_cmd='/bin/file'
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
;;
sni)
lt_cv_file_magic_cmd='/bin/file'
lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
lt_cv_file_magic_test_file=/lib/libc.so
;;
siemens)
lt_cv_deplibs_check_method=pass_all
;;
pc)
lt_cv_deplibs_check_method=pass_all
;;
esac
;;
tpf*)
lt_cv_deplibs_check_method=pass_all
;;
os2*)
lt_cv_deplibs_check_method=pass_all
;;
esac
])
file_magic_glob=
want_nocaseglob=no
if test "$build" = "$host"; then
case $host_os in
mingw* | pw32*)
if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
want_nocaseglob=yes
else
file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
fi
;;
esac
fi
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
test -z "$deplibs_check_method" && deplibs_check_method=unknown
_LT_DECL([], [deplibs_check_method], [1],
[Method to check whether dependent libraries are shared objects])
_LT_DECL([], [file_magic_cmd], [1],
[Command to use when deplibs_check_method = "file_magic"])
_LT_DECL([], [file_magic_glob], [1],
[How to find potential files when deplibs_check_method = "file_magic"])
_LT_DECL([], [want_nocaseglob], [1],
[Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
])# _LT_CHECK_MAGIC_METHOD
# LT_PATH_NM
# ----------
# find the pathname to a BSD- or MS-compatible name lister
AC_DEFUN([LT_PATH_NM],
[AC_REQUIRE([AC_PROG_CC])dnl
AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
lt_cv_path_NM=$NM
else
lt_nm_to_check=${ac_tool_prefix}nm
if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
lt_nm_to_check="$lt_nm_to_check nm"
fi
for lt_tmp_nm in $lt_nm_to_check; do
lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
tmp_nm=$ac_dir/$lt_tmp_nm
if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the 'sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
# Tru64's nm complains that /dev/null is an invalid object file
# MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
case $build_os in
mingw*) lt_bad_file=conftest.nm/nofile ;;
*) lt_bad_file=/dev/null ;;
esac
case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
*$lt_bad_file* | *'Invalid file or object type'*)
lt_cv_path_NM="$tmp_nm -B"
break 2
;;
*)
case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
*/dev/null*)
lt_cv_path_NM="$tmp_nm -p"
break 2
;;
*)
lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
;;
esac
;;
esac
fi
done
IFS=$lt_save_ifs
done
: ${lt_cv_path_NM=no}
fi])
if test no != "$lt_cv_path_NM"; then
NM=$lt_cv_path_NM
else
# Didn't find any BSD compatible name lister, look for dumpbin.
if test -n "$DUMPBIN"; then :
# Let the user override the test.
else
AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
*COFF*)
DUMPBIN="$DUMPBIN -symbols -headers"
;;
*)
DUMPBIN=:
;;
esac
fi
AC_SUBST([DUMPBIN])
if test : != "$DUMPBIN"; then
NM=$DUMPBIN
fi
fi
test -z "$NM" && NM=nm
AC_SUBST([NM])
_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
[lt_cv_nm_interface="BSD nm"
echo "int some_variable = 0;" > conftest.$ac_ext
(eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
(eval "$ac_compile" 2>conftest.err)
cat conftest.err >&AS_MESSAGE_LOG_FD
(eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
(eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
cat conftest.err >&AS_MESSAGE_LOG_FD
(eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
cat conftest.out >&AS_MESSAGE_LOG_FD
if $GREP 'External.*some_variable' conftest.out > /dev/null; then
lt_cv_nm_interface="MS dumpbin"
fi
rm -f conftest*])
])# LT_PATH_NM
# Old names:
AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AM_PROG_NM], [])
dnl AC_DEFUN([AC_PROG_NM], [])
# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
# --------------------------------
# how to determine the name of the shared library
# associated with a specific link library.
# -- PORTME fill in with the dynamic library characteristics
m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
[m4_require([_LT_DECL_EGREP])
m4_require([_LT_DECL_OBJDUMP])
m4_require([_LT_DECL_DLLTOOL])
AC_CACHE_CHECK([how to associate runtime and link libraries],
lt_cv_sharedlib_from_linklib_cmd,
[lt_cv_sharedlib_from_linklib_cmd='unknown'
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
# two different shell functions defined in ltmain.sh;
# decide which one to use based on capabilities of $DLLTOOL
case `$DLLTOOL --help 2>&1` in
*--identify-strict*)
lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
;;
*)
lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
;;
esac
;;
*)
# fallback: assume linklib IS sharedlib
lt_cv_sharedlib_from_linklib_cmd=$ECHO
;;
esac
])
sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
[Command to associate shared and link libraries])
])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
# _LT_PATH_MANIFEST_TOOL
# ----------------------
# locate the manifest tool
m4_defun([_LT_PATH_MANIFEST_TOOL],
[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
[lt_cv_path_mainfest_tool=no
echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
$MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
cat conftest.err >&AS_MESSAGE_LOG_FD
if $GREP 'Manifest Tool' conftest.out > /dev/null; then
lt_cv_path_mainfest_tool=yes
fi
rm -f conftest*])
if test yes != "$lt_cv_path_mainfest_tool"; then
MANIFEST_TOOL=:
fi
_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
])# _LT_PATH_MANIFEST_TOOL
# _LT_DLL_DEF_P([FILE])
# ---------------------
# True iff FILE is a Windows DLL '.def' file.
# Keep in sync with func_dll_def_p in the libtool script
AC_DEFUN([_LT_DLL_DEF_P],
[dnl
test DEF = "`$SED -n dnl
-e '\''s/^[[ ]]*//'\'' dnl Strip leading whitespace
-e '\''/^\(;.*\)*$/d'\'' dnl Delete empty lines and comments
-e '\''s/^\(EXPORTS\|LIBRARY\)\([[ ]].*\)*$/DEF/p'\'' dnl
-e q dnl Only consider the first "real" line
$1`" dnl
])# _LT_DLL_DEF_P
# LT_LIB_M
# --------
# check for math library
AC_DEFUN([LT_LIB_M],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case $host in
*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
# These system don't have libm, or don't need it
;;
*-ncr-sysv4.3*)
AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw)
AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
;;
*)
AC_CHECK_LIB(m, cos, LIBM=-lm)
;;
esac
AC_SUBST([LIBM])
])# LT_LIB_M
# Old name:
AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_CHECK_LIBM], [])
# _LT_COMPILER_NO_RTTI([TAGNAME])
# -------------------------------
m4_defun([_LT_COMPILER_NO_RTTI],
[m4_require([_LT_TAG_COMPILER])dnl
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
if test yes = "$GCC"; then
case $cc_basename in
nvcc*)
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
*)
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
esac
_LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
lt_cv_prog_compiler_rtti_exceptions,
[-fno-rtti -fno-exceptions], [],
[_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
fi
_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
[Compiler flag to turn off builtin functions])
])# _LT_COMPILER_NO_RTTI
# _LT_CMD_GLOBAL_SYMBOLS
# ----------------------
m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([LT_PATH_NM])dnl
AC_REQUIRE([LT_PATH_LD])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_TAG_COMPILER])dnl
# Check for command to grab the raw symbol name followed by C symbol from nm.
AC_MSG_CHECKING([command to parse $NM output from $compiler object])
AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
[
# These are sane defaults that work on at least a few old systems.
# [They come from Ultrix. What could be older than Ultrix?!! ;)]
# Character class describing NM global symbol codes.
symcode='[[BCDEGRST]]'
# Regexp to match symbols that can be accessed directly from C.
sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
# Define system-specific variables.
case $host_os in
aix*)
symcode='[[BCDT]]'
;;
cygwin* | mingw* | pw32* | cegcc*)
symcode='[[ABCDGISTW]]'
;;
hpux*)
if test ia64 = "$host_cpu"; then
symcode='[[ABCDEGRST]]'
fi
;;
irix* | nonstopux*)
symcode='[[BCDEGRST]]'
;;
osf*)
symcode='[[BCDEGQRST]]'
;;
solaris*)
symcode='[[BDRT]]'
;;
sco3.2v5*)
symcode='[[DT]]'
;;
sysv4.2uw2*)
symcode='[[DT]]'
;;
sysv5* | sco5v6* | unixware* | OpenUNIX*)
symcode='[[ABDT]]'
;;
sysv4)
symcode='[[DFNSTU]]'
;;
esac
# If we're using GNU nm, then use its standard symbol codes.
case `$NM -V 2>&1` in
*GNU* | *'with BFD'*)
symcode='[[ABCDGIRSTW]]' ;;
esac
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
# Gets list of data symbols to import.
lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
# Adjust the below global symbol transforms to fixup imported variables.
lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'"
lt_c_name_lib_hook="\
-e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\
-e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'"
else
# Disable hooks by default.
lt_cv_sys_global_symbol_to_import=
lt_cdecl_hook=
lt_c_name_hook=
lt_c_name_lib_hook=
fi
# Transform an extracted symbol line into a proper C declaration.
# Some systems (esp. on ia64) link data and code symbols differently,
# so use this general approach.
lt_cv_sys_global_symbol_to_cdecl="sed -n"\
$lt_cdecl_hook\
" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
$lt_c_name_hook\
" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'"
# Transform an extracted symbol line into symbol name with lib prefix and
# symbol address.
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
$lt_c_name_lib_hook\
" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\
" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'"
# Handle CRLF in mingw tool chain
opt_cr=
case $build_os in
mingw*)
opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
;;
esac
# Try without a prefix underscore, then with it.
for ac_symprfx in "" "_"; do
# Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
symxfrm="\\1 $ac_symprfx\\2 \\2"
# Write the raw and C identifiers.
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
# Fake it for dumpbin and say T for any non-static function,
# D for any global variable and I for any imported variable.
# Also find C++ and __fastcall symbols from MSVC++,
# which start with @ or ?.
lt_cv_sys_global_symbol_pipe="$AWK ['"\
" {last_section=section; section=\$ 3};"\
" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
" \$ 0!~/External *\|/{next};"\
" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
" {if(hide[section]) next};"\
" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
" ' prfx=^$ac_symprfx]"
else
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
fi
lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
# Check to see that the pipe works correctly.
pipe_works=no
rm -f conftest*
cat > conftest.$ac_ext <<_LT_EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
void nm_test_func(void);
void nm_test_func(void){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func();return(0);}
_LT_EOF
if AC_TRY_EVAL(ac_compile); then
# Now try to grab the symbols.
nlist=conftest.nm
if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
# Try sorting and uniquifying the output.
if sort "$nlist" | uniq > "$nlist"T; then
mv -f "$nlist"T "$nlist"
else
rm -f "$nlist"T
fi
# Make sure that we snagged all the symbols we need.
if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
cat <<_LT_EOF > conftest.$ac_ext
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
/* DATA imports from DLLs on WIN32 can't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT@&t@_DLSYM_CONST
#elif defined __osf__
/* This system does not cope well with relocations in const data. */
# define LT@&t@_DLSYM_CONST
#else
# define LT@&t@_DLSYM_CONST const
#endif
#ifdef __cplusplus
extern "C" {
#endif
_LT_EOF
# Now generate the symbol file.
eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
cat <<_LT_EOF >> conftest.$ac_ext
/* The mapping between symbol names and symbols. */
LT@&t@_DLSYM_CONST struct {
const char *name;
void *address;
}
lt__PROGRAM__LTX_preloaded_symbols[[]] =
{
{ "@PROGRAM@", (void *) 0 },
_LT_EOF
$SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
cat <<\_LT_EOF >> conftest.$ac_ext
{0, (void *) 0}
};
/* This works around a problem in FreeBSD linker */
#ifdef FREEBSD_WORKAROUND
static const void *lt_preloaded_setup() {
return lt__PROGRAM__LTX_preloaded_symbols;
}
#endif
#ifdef __cplusplus
}
#endif
_LT_EOF
# Now try linking the two files.
mv conftest.$ac_objext conftstm.$ac_objext
lt_globsym_save_LIBS=$LIBS
lt_globsym_save_CFLAGS=$CFLAGS
LIBS=conftstm.$ac_objext
CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
pipe_works=yes
fi
LIBS=$lt_globsym_save_LIBS
CFLAGS=$lt_globsym_save_CFLAGS
else
echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
fi
else
echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
fi
else
echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
fi
else
echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
cat conftest.$ac_ext >&5
fi
rm -rf conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
if test yes = "$pipe_works"; then
break
else
lt_cv_sys_global_symbol_pipe=
fi
done
])
if test -z "$lt_cv_sys_global_symbol_pipe"; then
lt_cv_sys_global_symbol_to_cdecl=
fi
if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
AC_MSG_RESULT(failed)
else
AC_MSG_RESULT(ok)
fi
# Response file support.
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
nm_file_list_spec='@'
elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
nm_file_list_spec='@'
fi
_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
[Take the output of nm and produce a listing of raw symbols and C names])
_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
[Transform the output of nm in a proper C declaration])
_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1],
[Transform the output of nm into a list of symbols to manually relocate])
_LT_DECL([global_symbol_to_c_name_address],
[lt_cv_sys_global_symbol_to_c_name_address], [1],
[Transform the output of nm in a C name address pair])
_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
[lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
[Transform the output of nm in a C name address pair when lib prefix is needed])
_LT_DECL([nm_interface], [lt_cv_nm_interface], [1],
[The name lister interface])
_LT_DECL([], [nm_file_list_spec], [1],
[Specify filename containing input files for $NM])
]) # _LT_CMD_GLOBAL_SYMBOLS
# _LT_COMPILER_PIC([TAGNAME])
# ---------------------------
m4_defun([_LT_COMPILER_PIC],
[m4_require([_LT_TAG_COMPILER])dnl
_LT_TAGVAR(lt_prog_compiler_wl, $1)=
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_static, $1)=
m4_if([$1], [CXX], [
# C++ specific cases for pic, static, wl, etc.
if test yes = "$GXX"; then
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
case $host_os in
aix*)
# All AIX code is PIC.
if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
# adding the '-m68020' flag to GCC prevents building anything better,
# like '-m68040'.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
;;
esac
;;
beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
mingw* | cygwin* | os2* | pw32* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
# Although the cygwin gcc ignores -fPIC, still need this for old-style
# (--disable-auto-import) libraries
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
case $host_os in
os2*)
_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
;;
esac
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
;;
*djgpp*)
# DJGPP does not support shared libraries at all
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
;;
haiku*)
# PIC is the default for Haiku.
# The "-static" flag exists, but is broken.
_LT_TAGVAR(lt_prog_compiler_static, $1)=
;;
interix[[3-9]]*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
;;
sysv4*MP*)
if test -d /usr/nec; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
fi
;;
hpux*)
# PIC is the default for 64-bit PA HP-UX, but not for 32-bit
# PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
# sets the default TLS model and affects inlining.
case $host_cpu in
hppa*64*)
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
esac
;;
*qnx* | *nto*)
# QNX uses GNU C++, but need to define -shared option too, otherwise
# it will coredump.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
esac
else
case $host_os in
aix[[4-9]]*)
# All AIX code is PIC.
if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
fi
;;
chorus*)
case $cc_basename in
cxch68*)
# Green Hills C++ Compiler
# _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
;;
esac
;;
mingw* | cygwin* | os2* | pw32* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
;;
dgux*)
case $cc_basename in
ec++*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
;;
ghcx*)
# Green Hills C++ Compiler
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
*)
;;
esac
;;
freebsd* | dragonfly*)
# FreeBSD uses GNU C++
;;
hpux9* | hpux10* | hpux11*)
case $cc_basename in
CC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
if test ia64 != "$host_cpu"; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
fi
;;
aCC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
;;
esac
;;
*)
;;
esac
;;
interix*)
# This is c89, which is MS Visual C++ (no shared libs)
# Anyone wants to do a port?
;;
irix5* | irix6* | nonstopux*)
case $cc_basename in
CC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
# CC pic flag -KPIC is the default.
;;
*)
;;
esac
;;
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
KCC*)
# KAI C++ Compiler
_LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
ecpc* )
# old Intel C++ for x86_64, which still supported -KPIC.
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
icpc* )
# Intel C++, used to be incompatible with GCC.
# ICC 10 doesn't accept -KPIC any more.
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
pgCC* | pgcpp*)
# Portland Group C++ compiler
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
cxx*)
# Compaq C++
# Make sure the PIC flag is empty. It appears that all Alpha
# Linux and Compaq Tru64 Unix objects are PIC.
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
# IBM XL 8.0, 9.0 on PPC and BlueGene
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
;;
*)
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*)
# Sun C++ 5.9
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
;;
esac
;;
esac
;;
lynxos*)
;;
m88k*)
;;
mvs*)
case $cc_basename in
cxx*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
;;
*)
;;
esac
;;
netbsd*)
;;
*qnx* | *nto*)
# QNX uses GNU C++, but need to define -shared option too, otherwise
# it will coredump.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
;;
osf3* | osf4* | osf5*)
case $cc_basename in
KCC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
;;
RCC*)
# Rational C++ 2.4.1
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
cxx*)
# Digital/Compaq C++
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# Make sure the PIC flag is empty. It appears that all Alpha
# Linux and Compaq Tru64 Unix objects are PIC.
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
*)
;;
esac
;;
psos*)
;;
solaris*)
case $cc_basename in
CC* | sunCC*)
# Sun C++ 4.2, 5.x and Centerline C++
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
;;
gcx*)
# Green Hills C++ Compiler
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
;;
*)
;;
esac
;;
sunos4*)
case $cc_basename in
CC*)
# Sun C++ 4.x
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
lcc*)
# Lucid
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
*)
;;
esac
;;
sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
case $cc_basename in
CC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
esac
;;
tandem*)
case $cc_basename in
NCC*)
# NonStop-UX NCC 3.20
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
;;
*)
;;
esac
;;
vxworks*)
;;
*)
_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
;;
esac
fi
],
[
if test yes = "$GCC"; then
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
case $host_os in
aix*)
# All AIX code is PIC.
if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
# adding the '-m68020' flag to GCC prevents building anything better,
# like '-m68040'.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
;;
esac
;;
beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
# Although the cygwin gcc ignores -fPIC, still need this for old-style
# (--disable-auto-import) libraries
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
case $host_os in
os2*)
_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
;;
esac
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
;;
haiku*)
# PIC is the default for Haiku.
# The "-static" flag exists, but is broken.
_LT_TAGVAR(lt_prog_compiler_static, $1)=
;;
hpux*)
# PIC is the default for 64-bit PA HP-UX, but not for 32-bit
# PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
# sets the default TLS model and affects inlining.
case $host_cpu in
hppa*64*)
# +Z the default
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
esac
;;
interix[[3-9]]*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
;;
msdosdjgpp*)
# Just because we use GCC doesn't mean we suddenly get shared libraries
# on systems that don't support them.
_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
enable_shared=no
;;
*nto* | *qnx*)
# QNX uses GNU C++, but need to define -shared option too, otherwise
# it will coredump.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
;;
sysv4*MP*)
if test -d /usr/nec; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
fi
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
esac
case $cc_basename in
nvcc*) # Cuda Compiler Driver 2.2
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
fi
;;
esac
else
# PORTME Check for flag to pass linker flags through the system compiler.
case $host_os in
aix*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
fi
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
case $cc_basename in
nagfor*)
# NAG Fortran compiler
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
esac
;;
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
case $host_os in
os2*)
_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
;;
esac
;;
hpux9* | hpux10* | hpux11*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled CC?
_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# PIC (with -KPIC) is the default.
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
# old Intel for x86_64, which still supported -KPIC.
ecc*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
# icc used to be incompatible with GCC.
# ICC 10 doesn't accept -KPIC any more.
icc* | ifort*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
# Lahey Fortran 8.1.
lf95*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
;;
nagfor*)
# NAG Fortran compiler
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
tcc*)
# Fabrice Bellard et al's Tiny C Compiler
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
ccc*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# All Alpha code is PIC.
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
xl* | bgxl* | bgf* | mpixl*)
# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
;;
*)
case `$CC -V 2>&1 | sed 5q` in
*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
# Sun Fortran 8.3 passes all unrecognized flags to the linker
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_TAGVAR(lt_prog_compiler_wl, $1)=''
;;
*Sun\ F* | *Sun*Fortran*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
;;
*Sun\ C*)
# Sun C 5.9
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
;;
*Intel*\ [[CF]]*Compiler*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
*Portland\ Group*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
esac
;;
esac
;;
newsos6)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
*nto* | *qnx*)
# QNX uses GNU C++, but need to define -shared option too, otherwise
# it will coredump.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
;;
osf3* | osf4* | osf5*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# All OSF/1 code is PIC.
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
rdos*)
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
solaris*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
case $cc_basename in
f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
esac
;;
sunos4*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
sysv4 | sysv4.2uw2* | sysv4.3*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
sysv4*MP*)
if test -d /usr/nec; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
;;
sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
unicos*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
;;
uts4*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
*)
_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
;;
esac
fi
])
case $host_os in
# For platforms that do not support PIC, -DPIC is meaningless:
*djgpp*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
;;
esac
AC_CACHE_CHECK([for $compiler option to produce PIC],
[_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
[_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
#
# Check to make sure the PIC flag actually works.
#
if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
_LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
[_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
[$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
[case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
"" | " "*) ;;
*) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
esac],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
fi
_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
[Additional compiler flags for building library objects])
_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
[How to pass a linker flag through the compiler])
#
# Check to make sure the static flag actually works.
#
wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
_LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
$lt_tmp_static_flag,
[],
[_LT_TAGVAR(lt_prog_compiler_static, $1)=])
_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
[Compiler flag to prevent dynamic linking])
])# _LT_COMPILER_PIC
# _LT_LINKER_SHLIBS([TAGNAME])
# ----------------------------
# See if the linker supports building shared libraries.
m4_defun([_LT_LINKER_SHLIBS],
[AC_REQUIRE([LT_PATH_LD])dnl
AC_REQUIRE([LT_PATH_NM])dnl
m4_require([_LT_PATH_MANIFEST_TOOL])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
m4_require([_LT_TAG_COMPILER])dnl
AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
m4_if([$1], [CXX], [
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
_LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
case $host_os in
aix[[4-9]]*)
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to GNU nm, but means don't demangle to AIX nm.
# Without the "-l" option, or with the "-B" option, AIX nm treats
# weak defined symbols like other global defined symbols, whereas
# GNU nm marks them as "W".
# While the 'weak' keyword is ignored in the Export File, we need
# it in the Import File for the 'aix-soname' feature, so we have
# to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
_LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
_LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
;;
pw32*)
_LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds
;;
cygwin* | mingw* | cegcc*)
case $cc_basename in
cl*)
_LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
;;
*)
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
_LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
;;
esac
;;
*)
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
;;
esac
], [
runpath_var=
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_cmds, $1)=
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(compiler_needs_object, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
_LT_TAGVAR(hardcode_automatic, $1)=no
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
_LT_TAGVAR(inherit_rpath, $1)=no
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(module_cmds, $1)=
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(old_archive_from_new_cmds, $1)=
_LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
_LT_TAGVAR(thread_safe_flag_spec, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
# include_expsyms should be a list of space-separated symbols to be *always*
# included in the symbol list
_LT_TAGVAR(include_expsyms, $1)=
# exclude_expsyms can be an extended regexp of symbols to exclude
# it will be wrapped by ' (' and ')$', so one must not match beginning or
# end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
# as well as any symbol that contains 'd'.
_LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# the symbol is explicitly referenced. Since portable code cannot
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
# Exclude shared library initialization/finalization symbols.
dnl Note also adjust exclude_expsyms for C++ above.
extract_expsyms_cmds=
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
if test yes != "$GCC"; then
with_gnu_ld=no
fi
;;
interix*)
# we just hope/assume this is gcc and not c89 (= MSVC++)
with_gnu_ld=yes
;;
openbsd* | bitrig*)
with_gnu_ld=no
;;
esac
_LT_TAGVAR(ld_shlibs, $1)=yes
# On some targets, GNU ld is compatible enough with the native linker
# that we're better off using the native interface for both.
lt_use_gnu_ld_interface=no
if test yes = "$with_gnu_ld"; then
case $host_os in
aix*)
# The AIX port of GNU ld has always aspired to compatibility
# with the native linker. However, as the warning in the GNU ld
# block says, versions before 2.19.5* couldn't really create working
# shared libraries, regardless of the interface used.
case `$LD -v 2>&1` in
*\ \(GNU\ Binutils\)\ 2.19.5*) ;;
*\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
*\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
*)
lt_use_gnu_ld_interface=yes
;;
esac
;;
*)
lt_use_gnu_ld_interface=yes
;;
esac
fi
if test yes = "$lt_use_gnu_ld_interface"; then
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='$wl'
# Set some defaults for GNU ld with shared library support. These
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
runpath_var=LD_RUN_PATH
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
_LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
supports_anon_versioning=no
case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in
*GNU\ gold*) supports_anon_versioning=yes ;;
*\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
# See if GNU ld supports shared libraries.
case $host_os in
aix[[3-9]]*)
# On AIX/PPC, the GNU linker is very broken
if test ia64 != "$host_cpu"; then
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
*** Warning: the GNU linker, at least up to release 2.19, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support. If you
*** really care for shared libraries, you may want to install binutils
*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
*** You will then need to restart the configuration process.
_LT_EOF
fi
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)=''
;;
m68k)
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
;;
esac
;;
beos*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
cygwin* | mingw* | pw32* | cegcc*)
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
_LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
# If the export-symbols file already is a .def file, use it as
# is; otherwise, prepend EXPORTS...
_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
cp $export_symbols $output_objdir/$soname.def;
else
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
haiku*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
os2*)
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
shrext_cmds=.dll
_LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
$ECHO EXPORTS >> $output_objdir/$libname.def~
emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
emximp -o $lib $output_objdir/$libname.def'
_LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
$ECHO EXPORTS >> $output_objdir/$libname.def~
prefix_cmds="$SED"~
if test EXPORTS = "`$SED 1q $export_symbols`"; then
prefix_cmds="$prefix_cmds -e 1d";
fi~
prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
emximp -o $lib $output_objdir/$libname.def'
_LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
;;
interix[[3-9]]*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
tmp_diet=no
if test linux-dietlibc = "$host_os"; then
case $cc_basename in
diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
esac
fi
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
&& test no = "$tmp_diet"
then
tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group f77 and f90 compilers
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
tmp_addflag=' -i_dynamic -nofor_main' ;;
ifc* | ifort*) # Intel Fortran compiler
tmp_addflag=' -nofor_main' ;;
lf95*) # Lahey Fortran 8.1
_LT_TAGVAR(whole_archive_flag_spec, $1)=
tmp_sharedflag='--shared' ;;
nagfor*) # NAGFOR 5.3
tmp_sharedflag='-Wl,-shared' ;;
xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
tmp_sharedflag='-qmkshrobj'
tmp_addflag= ;;
nvcc*) # Cuda Compiler Driver 2.2
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
tmp_sharedflag='-G' ;;
esac
_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
echo "local: *; };" >> $output_objdir/$libname.ver~
$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
case $cc_basename in
tcc*)
_LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic'
;;
xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
_LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
echo "local: *; };" >> $output_objdir/$libname.ver~
$LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
fi
;;
esac
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
solaris*)
if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
*** Warning: The releases 2.8.* of the GNU linker cannot reliably
*** create shared libraries on Solaris systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.9.1 or newer. Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
_LT_EOF
elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
case `$LD -v 2>&1` in
*\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
*** reliably create shared libraries on SCO systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
_LT_EOF
;;
*)
# For security reasons, it is highly recommended that you always
# use absolute paths for naming shared libraries, and exclude the
# DT_RUNPATH tag from executables and libraries. But doing so
# requires that you compile everything twice, which is a pain.
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
;;
sunos4*)
_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
wlarc=
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then
runpath_var=
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
case $host_os in
aix3*)
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=yes
_LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
_LT_TAGVAR(hardcode_direct, $1)=unsupported
fi
;;
aix[[4-9]]*)
if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
no_entry_flag=
else
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to GNU nm, but means don't demangle to AIX nm.
# Without the "-l" option, or with the "-B" option, AIX nm treats
# weak defined symbols like other global defined symbols, whereas
# GNU nm marks them as "W".
# While the 'weak' keyword is ignored in the Export File, we need
# it in the Import File for the 'aix-soname' feature, so we have
# to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
_LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
_LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
# have runtime linking enabled, and use it for executables.
# For shared libraries, we enable/disable runtime linking
# depending on the kind of the shared library created -
# when "with_aix_soname,aix_use_runtimelinking" is:
# "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
# "aix,yes" lib.so shared, rtl:yes, for executables
# lib.a static archive
# "both,no" lib.so.V(shr.o) shared, rtl:yes
# lib.a(lib.so.V) shared, rtl:no, for executables
# "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
# lib.a(lib.so.V) shared, rtl:no
# "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
# lib.a static archive
case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
for ld_flag in $LDFLAGS; do
if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
aix_use_runtimelinking=yes
break
fi
done
if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
# With aix-soname=svr4, we create the lib.so.V shared archives only,
# so we don't have lib.a shared libs to link our executables.
# We have to force runtime linking in this case.
aix_use_runtimelinking=yes
LDFLAGS="$LDFLAGS -Wl,-brtl"
fi
;;
esac
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
# When large executables or shared objects are built, AIX ld can
# have problems creating the table of contents. If linking a library
# or program results in "error TOC overflow" add -mminimal-toc to
# CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
_LT_TAGVAR(archive_cmds, $1)=''
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
_LT_TAGVAR(file_list_spec, $1)='$wl-f,'
case $with_aix_soname,$aix_use_runtimelinking in
aix,*) ;; # traditional, no import file
svr4,* | *,yes) # use import file
# The Import File defines what to hardcode.
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
;;
esac
if test yes = "$GCC"; then
case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
# We have reworked collect2
:
else
# We have old collect2
_LT_TAGVAR(hardcode_direct, $1)=unsupported
# It fails to find uninstalled libraries when the uninstalled
# path is not listed in the libpath. Setting hardcode_minus_L
# to unsupported forces relinking
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=
fi
;;
esac
shared_flag='-shared'
if test yes = "$aix_use_runtimelinking"; then
shared_flag="$shared_flag "'$wl-G'
fi
# Need to ensure runtime linking is disabled for the traditional
# shared library, or the linker may eventually find shared libraries
# /with/ Import File - we do not want to mix them.
shared_flag_aix='-shared'
shared_flag_svr4='-shared $wl-G'
else
# not using gcc
if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
if test yes = "$aix_use_runtimelinking"; then
shared_flag='$wl-G'
else
shared_flag='$wl-bM:SRE'
fi
shared_flag_aix='$wl-bM:SRE'
shared_flag_svr4='$wl-G'
fi
fi
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to export.
_LT_TAGVAR(always_export_symbols, $1)=yes
if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
if test ia64 = "$host_cpu"; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
_LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
_LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
_LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
_LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
_LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
# -brtl affects multiple linker settings, -berok does not and is overridden later
compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
if test svr4 != "$with_aix_soname"; then
# This is similar to how AIX traditionally builds its shared libraries.
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
fi
if test aix != "$with_aix_soname"; then
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
else
# used by -dlpreopen to get the symbols
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
fi
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)=''
;;
m68k)
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
;;
esac
;;
bsdi[[45]]*)
_LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
;;
cygwin* | mingw* | pw32* | cegcc*)
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
case $cc_basename in
cl*)
# Native MSVC
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=yes
_LT_TAGVAR(file_list_spec, $1)='@'
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
cp "$export_symbols" "$output_objdir/$soname.def";
echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
else
$SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
fi~
$CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
_LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
# Don't use ranlib
_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
lt_tool_outputfile="@TOOL_OUTPUT@"~
case $lt_outputfile in
*.exe|*.EXE) ;;
*)
lt_outputfile=$lt_outputfile.exe
lt_tool_outputfile=$lt_tool_outputfile.exe
;;
esac~
if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
$MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
$RM "$lt_outputfile.manifest";
fi'
;;
*)
# Assume MSVC wrapper
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
_LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
# FIXME: Should let the user specify the lib program.
_LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
;;
esac
;;
darwin* | rhapsody*)
_LT_DARWIN_LINKER_FEATURES($1)
;;
dgux*)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
# FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
# support. Future versions do this automatically, but an explicit c++rt0.o
# does not break anything, and helps significantly (at the cost of a little
# extra space).
freebsd2.2*)
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
# Unfortunately, older versions of FreeBSD 2 do not have this feature.
freebsd2.*)
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
freebsd* | dragonfly*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
hpux9*)
if test yes = "$GCC"; then
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
fi
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_direct, $1)=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
;;
hpux10*)
if test yes,no = "$GCC,$with_gnu_ld"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
if test no = "$with_gnu_ld"; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
fi
;;
hpux11*)
if test yes,no = "$GCC,$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
case $host_cpu in
hppa*64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
m4_if($1, [], [
# Older versions of the 11.00 compiler do not understand -b yet
# (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
_LT_LINKER_OPTION([if $CC understands -b],
_LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
[_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
[_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
[_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
;;
esac
fi
if test no = "$with_gnu_ld"; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
case $host_cpu in
hppa*64*|ia64*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*)
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
;;
esac
fi
;;
irix5* | irix6* | nonstopux*)
if test yes = "$GCC"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
# Try to use the -exported_symbol ld option, if it does not
# work, assume that -exports_file does not work either and
# implicitly export all symbols.
# This should be the same for all languages, so no per-tag cache variable.
AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
[lt_cv_irix_exported_symbol],
[save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
AC_LINK_IFELSE(
[AC_LANG_SOURCE(
[AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
[C++], [[int foo (void) { return 0; }]],
[Fortran 77], [[
subroutine foo
end]],
[Fortran], [[
subroutine foo
end]])])],
[lt_cv_irix_exported_symbol=yes],
[lt_cv_irix_exported_symbol=no])
LDFLAGS=$save_LDFLAGS])
if test yes = "$lt_cv_irix_exported_symbol"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
fi
else
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(inherit_rpath, $1)=yes
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
linux*)
case $cc_basename in
tcc*)
# Fabrice Bellard et al's Tiny C Compiler
_LT_TAGVAR(ld_shlibs, $1)=yes
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
fi
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
newsos6)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*nto* | *qnx*)
;;
openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
else
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
fi
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
os2*)
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
shrext_cmds=.dll
_LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
$ECHO EXPORTS >> $output_objdir/$libname.def~
emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
emximp -o $lib $output_objdir/$libname.def'
_LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
$ECHO EXPORTS >> $output_objdir/$libname.def~
prefix_cmds="$SED"~
if test EXPORTS = "`$SED 1q $export_symbols`"; then
prefix_cmds="$prefix_cmds -e 1d";
fi~
prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
emximp -o $lib $output_objdir/$libname.def'
_LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
;;
osf3*)
if test yes = "$GCC"; then
_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test yes = "$GCC"; then
_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
$CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
;;
solaris*)
_LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
if test yes = "$GCC"; then
wlarc='$wl'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
wlarc=''
_LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
;;
*)
wlarc='$wl'
_LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
;;
esac
fi
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
# The compiler driver will combine and reorder linker options,
# but understands '-z linker_flag'. GCC discards it without '$wl',
# but is careful enough not to reorder.
# Supported since Solaris 2.6 (maybe 2.5.1?)
if test yes = "$GCC"; then
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
fi
;;
esac
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
sunos4*)
if test sequent = "$host_vendor"; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
sysv4)
case $host_vendor in
sni)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
;;
siemens)
## LD is ld it makes a PLAMLIB
## CC just makes a GrossModule.
_LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
_LT_TAGVAR(hardcode_direct, $1)=no
;;
motorola)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
;;
esac
runpath_var='LD_RUN_PATH'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
sysv4.3*)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
;;
sysv4*MP*)
if test -d /usr/nec; then
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var=LD_RUN_PATH
hardcode_runpath_var=yes
_LT_TAGVAR(ld_shlibs, $1)=yes
fi
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
_LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var='LD_RUN_PATH'
if test yes = "$GCC"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
sysv5* | sco3.2v5* | sco5v6*)
# Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
_LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
runpath_var='LD_RUN_PATH'
if test yes = "$GCC"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
uts4*)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*)
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
if test sni = "$host_vendor"; then
case $host in
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym'
;;
esac
fi
fi
])
AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
_LT_DECL([], [extract_expsyms_cmds], [2],
[The commands to extract the exported symbol list from a shared archive])
#
# Do we need to explicitly link libc?
#
case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
x|xyes)
# Assume -lc should be added
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
if test yes,yes = "$GCC,$enable_shared"; then
case $_LT_TAGVAR(archive_cmds, $1) in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
;;
'$CC '*)
# Test whether the compiler implicitly links with -lc since on some
# systems, -lgcc has to come before -lc. If gcc already passes -lc
# to ld, don't add -lc before -lgcc.
AC_CACHE_CHECK([whether -lc should be explicitly linked in],
[lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
[$RM conftest*
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
soname=conftest
lib=conftest
libobjs=conftest.$ac_objext
deplibs=
wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
compiler_flags=-v
linker_flags=-v
verstring=
output_objdir=.
libname=conftest
lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
_LT_TAGVAR(allow_undefined_flag, $1)=
if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
then
lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
else
lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
fi
_LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
else
cat conftest.err 1>&5
fi
$RM conftest*
])
_LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
;;
esac
fi
;;
esac
_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
[Whether or not to add -lc for building shared libraries])
_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
[enable_shared_with_static_runtimes], [0],
[Whether or not to disallow shared libs when runtime libs are static])
_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
[Compiler flag to allow reflexive dlopens])
_LT_TAGDECL([], [whole_archive_flag_spec], [1],
[Compiler flag to generate shared objects directly from archives])
_LT_TAGDECL([], [compiler_needs_object], [1],
[Whether the compiler copes with passing no objects directly])
_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
[Create an old-style archive from a shared archive])
_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
[Create a temporary old-style archive to link instead of a shared archive])
_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
_LT_TAGDECL([], [archive_expsym_cmds], [2])
_LT_TAGDECL([], [module_cmds], [2],
[Commands used to build a loadable module if different from building
a shared archive.])
_LT_TAGDECL([], [module_expsym_cmds], [2])
_LT_TAGDECL([], [with_gnu_ld], [1],
[Whether we are building with GNU ld or not])
_LT_TAGDECL([], [allow_undefined_flag], [1],
[Flag that allows shared libraries with undefined symbols to be built])
_LT_TAGDECL([], [no_undefined_flag], [1],
[Flag that enforces no undefined symbols])
_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
[Flag to hardcode $libdir into a binary during linking.
This must work even if $libdir does not exist])
_LT_TAGDECL([], [hardcode_libdir_separator], [1],
[Whether we need a single "-rpath" flag with a separated argument])
_LT_TAGDECL([], [hardcode_direct], [0],
[Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
DIR into the resulting binary])
_LT_TAGDECL([], [hardcode_direct_absolute], [0],
[Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
DIR into the resulting binary and the resulting library dependency is
"absolute", i.e impossible to change by setting $shlibpath_var if the
library is relocated])
_LT_TAGDECL([], [hardcode_minus_L], [0],
[Set to "yes" if using the -LDIR flag during linking hardcodes DIR
into the resulting binary])
_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
[Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
into the resulting binary])
_LT_TAGDECL([], [hardcode_automatic], [0],
[Set to "yes" if building a shared library automatically hardcodes DIR
into the library and all subsequent libraries and executables linked
against it])
_LT_TAGDECL([], [inherit_rpath], [0],
[Set to yes if linker adds runtime paths of dependent libraries
to runtime path list])
_LT_TAGDECL([], [link_all_deplibs], [0],
[Whether libtool must link a program against all its dependency libraries])
_LT_TAGDECL([], [always_export_symbols], [0],
[Set to "yes" if exported symbols are required])
_LT_TAGDECL([], [export_symbols_cmds], [2],
[The commands to list exported symbols])
_LT_TAGDECL([], [exclude_expsyms], [1],
[Symbols that should not be listed in the preloaded symbols])
_LT_TAGDECL([], [include_expsyms], [1],
[Symbols that must always be exported])
_LT_TAGDECL([], [prelink_cmds], [2],
[Commands necessary for linking programs (against libraries) with templates])
_LT_TAGDECL([], [postlink_cmds], [2],
[Commands necessary for finishing linking programs])
_LT_TAGDECL([], [file_list_spec], [1],
[Specify filename containing input files])
dnl FIXME: Not yet implemented
dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
dnl [Compiler flag to generate thread safe objects])
])# _LT_LINKER_SHLIBS
# _LT_LANG_C_CONFIG([TAG])
# ------------------------
# Ensure that the configuration variables for a C compiler are suitably
# defined. These variables are subsequently used by _LT_CONFIG to write
# the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_C_CONFIG],
[m4_require([_LT_DECL_EGREP])dnl
lt_save_CC=$CC
AC_LANG_PUSH(C)
# Source file extension for C test sources.
ac_ext=c
# Object file extension for compiled C test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;"
# Code to be used in simple link tests
lt_simple_link_test_code='int main(){return(0);}'
_LT_TAG_COMPILER
# Save the default compiler, since it gets overwritten when the other
# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
compiler_DEFAULT=$CC
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
if test -n "$compiler"; then
_LT_COMPILER_NO_RTTI($1)
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_SYS_DYNAMIC_LINKER($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
LT_SYS_DLOPEN_SELF
_LT_CMD_STRIPLIB
# Report what library types will actually be built
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
if test ia64 != "$host_cpu"; then
case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
yes,aix,yes) ;; # shared object as lib.so file only
yes,svr4,*) ;; # shared object as lib.so archive member only
yes,*) enable_static=no ;; # shared object in lib.a archive as well
esac
fi
;;
esac
AC_MSG_RESULT([$enable_shared])
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
_LT_CONFIG($1)
fi
AC_LANG_POP
CC=$lt_save_CC
])# _LT_LANG_C_CONFIG
# _LT_LANG_CXX_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for a C++ compiler are suitably
# defined. These variables are subsequently used by _LT_CONFIG to write
# the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_CXX_CONFIG],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_PATH_MANIFEST_TOOL])dnl
if test -n "$CXX" && ( test no != "$CXX" &&
( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
(test g++ != "$CXX"))); then
AC_PROG_CXXCPP
else
_lt_caught_CXX_error=yes
fi
AC_LANG_PUSH(C++)
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(compiler_needs_object, $1)=no
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
_LT_TAGVAR(hardcode_automatic, $1)=no
_LT_TAGVAR(inherit_rpath, $1)=no
_LT_TAGVAR(module_cmds, $1)=
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
# Source file extension for C++ test sources.
ac_ext=cpp
# Object file extension for compiled C++ test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# No sense in running all these tests if we already determined that
# the CXX compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
if test yes != "$_lt_caught_CXX_error"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;"
# Code to be used in simple link tests
lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_LD=$LD
lt_save_GCC=$GCC
GCC=$GXX
lt_save_with_gnu_ld=$with_gnu_ld
lt_save_path_LD=$lt_cv_path_LD
if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
else
$as_unset lt_cv_prog_gnu_ld
fi
if test -n "${lt_cv_path_LDCXX+set}"; then
lt_cv_path_LD=$lt_cv_path_LDCXX
else
$as_unset lt_cv_path_LD
fi
test -z "${LDCXX+set}" || LD=$LDCXX
CC=${CXX-"c++"}
CFLAGS=$CXXFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
if test -n "$compiler"; then
# We don't want -fno-exception when compiling C++ code, so set the
# no_builtin_flag separately
if test yes = "$GXX"; then
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
else
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
fi
if test yes = "$GXX"; then
# Set up default GNU C++ configuration
LT_PATH_LD
# Check if GNU C++ uses GNU ld as the underlying linker, since the
# archiving commands below assume that GNU ld is being used.
if test yes = "$with_gnu_ld"; then
_LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# If archive_cmds runs LD, not CC, wlarc should be empty
# XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
# investigate it a little bit more. (MM)
wlarc='$wl'
# ancient GNU ld didn't support --whole-archive et. al.
if eval "`$CC -print-prog-name=ld` --help 2>&1" |
$GREP 'no-whole-archive' > /dev/null; then
_LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
else
with_gnu_ld=no
wlarc=
# A generic and very simple default shared library creation
# command for GNU C++ for the case where it uses the native
# linker, instead of GNU ld. If possible, this setting should
# overridden to take advantage of the native linker features on
# the platform it is being used on.
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
fi
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
GXX=no
with_gnu_ld=no
wlarc=
fi
# PORTME: fill in a description of your system's C++ link characteristics
AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
_LT_TAGVAR(ld_shlibs, $1)=yes
case $host_os in
aix3*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aix[[4-9]]*)
if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
no_entry_flag=
else
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
# have runtime linking enabled, and use it for executables.
# For shared libraries, we enable/disable runtime linking
# depending on the kind of the shared library created -
# when "with_aix_soname,aix_use_runtimelinking" is:
# "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
# "aix,yes" lib.so shared, rtl:yes, for executables
# lib.a static archive
# "both,no" lib.so.V(shr.o) shared, rtl:yes
# lib.a(lib.so.V) shared, rtl:no, for executables
# "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
# lib.a(lib.so.V) shared, rtl:no
# "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
# lib.a static archive
case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
for ld_flag in $LDFLAGS; do
case $ld_flag in
*-brtl*)
aix_use_runtimelinking=yes
break
;;
esac
done
if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
# With aix-soname=svr4, we create the lib.so.V shared archives only,
# so we don't have lib.a shared libs to link our executables.
# We have to force runtime linking in this case.
aix_use_runtimelinking=yes
LDFLAGS="$LDFLAGS -Wl,-brtl"
fi
;;
esac
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
# When large executables or shared objects are built, AIX ld can
# have problems creating the table of contents. If linking a library
# or program results in "error TOC overflow" add -mminimal-toc to
# CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
_LT_TAGVAR(archive_cmds, $1)=''
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
_LT_TAGVAR(file_list_spec, $1)='$wl-f,'
case $with_aix_soname,$aix_use_runtimelinking in
aix,*) ;; # no import file
svr4,* | *,yes) # use import file
# The Import File defines what to hardcode.
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
;;
esac
if test yes = "$GXX"; then
case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
# We have reworked collect2
:
else
# We have old collect2
_LT_TAGVAR(hardcode_direct, $1)=unsupported
# It fails to find uninstalled libraries when the uninstalled
# path is not listed in the libpath. Setting hardcode_minus_L
# to unsupported forces relinking
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=
fi
esac
shared_flag='-shared'
if test yes = "$aix_use_runtimelinking"; then
shared_flag=$shared_flag' $wl-G'
fi
# Need to ensure runtime linking is disabled for the traditional
# shared library, or the linker may eventually find shared libraries
# /with/ Import File - we do not want to mix them.
shared_flag_aix='-shared'
shared_flag_svr4='-shared $wl-G'
else
# not using gcc
if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
if test yes = "$aix_use_runtimelinking"; then
shared_flag='$wl-G'
else
shared_flag='$wl-bM:SRE'
fi
shared_flag_aix='$wl-bM:SRE'
shared_flag_svr4='$wl-G'
fi
fi
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to
# export.
_LT_TAGVAR(always_export_symbols, $1)=yes
if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
# The "-G" linker flag allows undefined symbols.
_LT_TAGVAR(no_undefined_flag, $1)='-bernotok'
# Determine the default libpath from the value encoded in an empty
# executable.
_LT_SYS_MODULE_PATH_AIX([$1])
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
if test ia64 = "$host_cpu"; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
_LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
_LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
_LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
_LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
_LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
# -brtl affects multiple linker settings, -berok does not and is overridden later
compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
if test svr4 != "$with_aix_soname"; then
# This is similar to how AIX traditionally builds its shared
# libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
fi
if test aix != "$with_aix_soname"; then
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
else
# used by -dlpreopen to get the symbols
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
fi
_LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
beos*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
chorus*)
case $cc_basename in
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
;;
cygwin* | mingw* | pw32* | cegcc*)
case $GXX,$cc_basename in
,cl* | no,cl*)
# Native MSVC
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=yes
_LT_TAGVAR(file_list_spec, $1)='@'
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
cp "$export_symbols" "$output_objdir/$soname.def";
echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
else
$SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
fi~
$CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
# Don't use ranlib
_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
lt_tool_outputfile="@TOOL_OUTPUT@"~
case $lt_outputfile in
*.exe|*.EXE) ;;
*)
lt_outputfile=$lt_outputfile.exe
lt_tool_outputfile=$lt_tool_outputfile.exe
;;
esac~
func_to_tool_file "$lt_outputfile"~
if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
$MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
$RM "$lt_outputfile.manifest";
fi'
;;
*)
# g++
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
# If the export-symbols file already is a .def file, use it as
# is; otherwise, prepend EXPORTS...
_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
cp $export_symbols $output_objdir/$soname.def;
else
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
$CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
;;
darwin* | rhapsody*)
_LT_DARWIN_LINKER_FEATURES($1)
;;
os2*)
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
shrext_cmds=.dll
_LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
$ECHO EXPORTS >> $output_objdir/$libname.def~
emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
emximp -o $lib $output_objdir/$libname.def'
_LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
$ECHO EXPORTS >> $output_objdir/$libname.def~
prefix_cmds="$SED"~
if test EXPORTS = "`$SED 1q $export_symbols`"; then
prefix_cmds="$prefix_cmds -e 1d";
fi~
prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
emximp -o $lib $output_objdir/$libname.def'
_LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
;;
dgux*)
case $cc_basename in
ec++*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
ghcx*)
# Green Hills C++ Compiler
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
;;
freebsd2.*)
# C++ shared libraries reported to be fairly broken before
# switch to ELF
_LT_TAGVAR(ld_shlibs, $1)=no
;;
freebsd-elf*)
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
;;
freebsd* | dragonfly*)
# FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
# conventions
_LT_TAGVAR(ld_shlibs, $1)=yes
;;
haiku*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
hpux9*)
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
# but as the default
# location of the library.
case $cc_basename in
CC*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aCC*)
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
if test yes = "$GXX"; then
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
;;
hpux10*|hpux11*)
if test no = "$with_gnu_ld"; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
case $host_cpu in
hppa*64*|ia64*)
;;
*)
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
;;
esac
fi
case $host_cpu in
hppa*64*|ia64*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*)
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
# but as the default
# location of the library.
;;
esac
case $cc_basename in
CC*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aCC*)
case $host_cpu in
hppa*64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
if test yes = "$GXX"; then
if test no = "$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
fi
else
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
;;
interix[[3-9]]*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
irix5* | irix6*)
case $cc_basename in
CC*)
# SGI C++
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
# necessary to make sure instantiated templates are included
# in the archive.
_LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
;;
*)
if test yes = "$GXX"; then
if test no = "$with_gnu_ld"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
fi
fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
esac
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(inherit_rpath, $1)=yes
;;
linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
_LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# Archives containing C++ object files must be created using
# "CC -Bstatic", where "CC" is the KAI C++ compiler.
_LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
;;
icpc* | ecpc* )
# Intel C++
with_gnu_ld=yes
# version 8.0 and above of icpc choke on multiply defined symbols
# if we add $predep_objects and $postdep_objects, however 7.1 and
# earlier do not add the objects themselves.
case `$CC -V 2>&1` in
*"Version 7."*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
*) # Version 8.0 or newer
tmp_idyn=
case $host_cpu in
ia64*) tmp_idyn=' -i_dynamic';;
esac
_LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
esac
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
;;
pgCC* | pgcpp*)
# Portland Group C++ compiler
case `$CC -V` in
*pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
_LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
_LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
$RANLIB $oldlib'
_LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
*) # Version 6 and above use weak symbols
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
esac
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
;;
cxx*)
# Compaq C++
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols'
runpath_var=LD_RUN_PATH
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
;;
xl* | mpixl* | bgxl*)
# IBM XL 8.0 on PPC, with GNU ld
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
_LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
;;
*)
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*)
# Sun C++ 5.9
_LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
_LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
# Not sure whether something based on
# $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
# would be better.
output_verbose_link_cmd='func_echo_all'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
# necessary to make sure instantiated templates are included
# in the archive.
_LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
;;
esac
;;
esac
;;
lynxos*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
m88k*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
mvs*)
case $cc_basename in
cxx*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
;;
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
wlarc=
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
fi
# Workaround some broken pre-1.5 toolchains
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
;;
*nto* | *qnx*)
_LT_TAGVAR(ld_shlibs, $1)=yes
;;
openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
_LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
fi
output_verbose_link_cmd=func_echo_all
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
osf3* | osf4* | osf5*)
case $cc_basename in
KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
_LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Archives containing C++ object files must be created using
# the KAI C++ compiler.
case $host in
osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
esac
;;
RCC*)
# Rational C++ 2.4.1
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
cxx*)
case $host in
osf3*)
_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
;;
*)
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
echo "-hidden">> $lib.exp~
$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
$RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
;;
esac
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
if test yes,no = "$GXX,$with_gnu_ld"; then
_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
case $host in
osf3*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
;;
esac
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
;;
psos*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
sunos4*)
case $cc_basename in
CC*)
# Sun C++ 4.x
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
lcc*)
# Lucid
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
;;
solaris*)
case $cc_basename in
CC* | sunCC*)
# Sun C++ 4.2, 5.x and Centerline C++
_LT_TAGVAR(archive_cmds_need_lc,$1)=yes
_LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
_LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
# The compiler driver will combine and reorder linker options,
# but understands '-z linker_flag'.
# Supported since Solaris 2.6 (maybe 2.5.1?)
_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
;;
esac
_LT_TAGVAR(link_all_deplibs, $1)=yes
output_verbose_link_cmd='func_echo_all'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
# necessary to make sure instantiated templates are included
# in the archive.
_LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
;;
gcx*)
# Green Hills C++ Compiler
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
# The C++ compiler must be used to create the archive.
_LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
;;
*)
# GNU C++ compiler with Solaris linker
if test yes,no = "$GXX,$with_gnu_ld"; then
_LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs'
if $CC --version | $GREP -v '^2\.7' > /dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
# g++ 2.7 appears to require '-G' NOT '-shared' on this
# platform.
_LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
fi
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir'
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
_LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
;;
esac
fi
;;
esac
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
_LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var='LD_RUN_PATH'
case $cc_basename in
CC*)
_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
sysv5* | sco3.2v5* | sco5v6*)
# Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
_LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
runpath_var='LD_RUN_PATH'
case $cc_basename in
CC*)
_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
'"$_LT_TAGVAR(old_archive_cmds, $1)"
_LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
'"$_LT_TAGVAR(reload_cmds, $1)"
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
tandem*)
case $cc_basename in
NCC*)
# NonStop-UX NCC 3.20
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
;;
vxworks*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
_LT_TAGVAR(GCC, $1)=$GXX
_LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
_LT_SYS_HIDDEN_LIBDEPS($1)
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_SYS_DYNAMIC_LINKER($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi # test -n "$compiler"
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
LDCXX=$LD
LD=$lt_save_LD
GCC=$lt_save_GCC
with_gnu_ld=$lt_save_with_gnu_ld
lt_cv_path_LDCXX=$lt_cv_path_LD
lt_cv_path_LD=$lt_save_path_LD
lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
fi # test yes != "$_lt_caught_CXX_error"
AC_LANG_POP
])# _LT_LANG_CXX_CONFIG
# _LT_FUNC_STRIPNAME_CNF
# ----------------------
# func_stripname_cnf prefix suffix name
# strip PREFIX and SUFFIX off of NAME.
# PREFIX and SUFFIX must not contain globbing or regex special
# characters, hashes, percent signs, but SUFFIX may contain a leading
# dot (in which case that matches only a dot).
#
# This function is identical to the (non-XSI) version of func_stripname,
# except this one can be used by m4 code that may be executed by configure,
# rather than the libtool script.
m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
AC_REQUIRE([_LT_DECL_SED])
AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
func_stripname_cnf ()
{
case @S|@2 in
.*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;;
*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;;
esac
} # func_stripname_cnf
])# _LT_FUNC_STRIPNAME_CNF
# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
# ---------------------------------
# Figure out "hidden" library dependencies from verbose
# compiler output when linking a shared library.
# Parse the compiler output and extract the necessary
# objects, libraries and library flags.
m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
# Dependencies to place before and after the object being linked:
_LT_TAGVAR(predep_objects, $1)=
_LT_TAGVAR(postdep_objects, $1)=
_LT_TAGVAR(predeps, $1)=
_LT_TAGVAR(postdeps, $1)=
_LT_TAGVAR(compiler_lib_search_path, $1)=
dnl we can't use the lt_simple_compile_test_code here,
dnl because it contains code intended for an executable,
dnl not a library. It's possible we should let each
dnl tag define a new lt_????_link_test_code variable,
dnl but it's only used here...
m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
int a;
void foo (void) { a = 0; }
_LT_EOF
], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
class Foo
{
public:
Foo (void) { a = 0; }
private:
int a;
};
_LT_EOF
], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
subroutine foo
implicit none
integer*4 a
a=0
return
end
_LT_EOF
], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
subroutine foo
implicit none
integer a
a=0
return
end
_LT_EOF
], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
public class foo {
private int a;
public void bar (void) {
a = 0;
}
};
_LT_EOF
], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
package foo
func foo() {
}
_LT_EOF
])
_lt_libdeps_save_CFLAGS=$CFLAGS
case "$CC $CFLAGS " in #(
*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
esac
dnl Parse the compiler output and extract the necessary
dnl objects, libraries and library flags.
if AC_TRY_EVAL(ac_compile); then
# Parse the compiler output and extract the necessary
# objects, libraries and library flags.
# Sentinel used to keep track of whether or not we are before
# the conftest object file.
pre_test_object_deps_done=no
for p in `eval "$output_verbose_link_cmd"`; do
case $prev$p in
-L* | -R* | -l*)
# Some compilers place space between "-{L,R}" and the path.
# Remove the space.
if test x-L = "$p" ||
test x-R = "$p"; then
prev=$p
continue
fi
# Expand the sysroot to ease extracting the directories later.
if test -z "$prev"; then
case $p in
-L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
-R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
-l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
esac
fi
case $p in
=*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
esac
if test no = "$pre_test_object_deps_done"; then
case $prev in
-L | -R)
# Internal compiler library paths should come after those
# provided the user. The postdeps already come after the
# user supplied libs so there is no need to process them.
if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
_LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p
else
_LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p"
fi
;;
# The "-l" case would never come before the object being
# linked, so don't bother handling this case.
esac
else
if test -z "$_LT_TAGVAR(postdeps, $1)"; then
_LT_TAGVAR(postdeps, $1)=$prev$p
else
_LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p"
fi
fi
prev=
;;
*.lto.$objext) ;; # Ignore GCC LTO objects
*.$objext)
# This assumes that the test object file only shows up
# once in the compiler output.
if test "$p" = "conftest.$objext"; then
pre_test_object_deps_done=yes
continue
fi
if test no = "$pre_test_object_deps_done"; then
if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
_LT_TAGVAR(predep_objects, $1)=$p
else
_LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
fi
else
if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
_LT_TAGVAR(postdep_objects, $1)=$p
else
_LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
fi
fi
;;
*) ;; # Ignore the rest.
esac
done
# Clean up.
rm -f a.out a.exe
else
echo "libtool.m4: error: problem compiling $1 test program"
fi
$RM -f confest.$objext
CFLAGS=$_lt_libdeps_save_CFLAGS
# PORTME: override above test on systems where it is broken
m4_if([$1], [CXX],
[case $host_os in
interix[[3-9]]*)
# Interix 3.5 installs completely hosed .la files for C++, so rather than
# hack all around it, let's just trust "g++" to DTRT.
_LT_TAGVAR(predep_objects,$1)=
_LT_TAGVAR(postdep_objects,$1)=
_LT_TAGVAR(postdeps,$1)=
;;
esac
])
case " $_LT_TAGVAR(postdeps, $1) " in
*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
esac
_LT_TAGVAR(compiler_lib_search_dirs, $1)=
if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
_LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'`
fi
_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
[The directories searched by this compiler when creating a shared library])
_LT_TAGDECL([], [predep_objects], [1],
[Dependencies to place before and after the objects being linked to
create a shared library])
_LT_TAGDECL([], [postdep_objects], [1])
_LT_TAGDECL([], [predeps], [1])
_LT_TAGDECL([], [postdeps], [1])
_LT_TAGDECL([], [compiler_lib_search_path], [1],
[The library search path used internally by the compiler when linking
a shared library])
])# _LT_SYS_HIDDEN_LIBDEPS
# _LT_LANG_F77_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for a Fortran 77 compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_F77_CONFIG],
[AC_LANG_PUSH(Fortran 77)
if test -z "$F77" || test no = "$F77"; then
_lt_disable_F77=yes
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=no
_LT_TAGVAR(inherit_rpath, $1)=no
_LT_TAGVAR(module_cmds, $1)=
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
# Source file extension for f77 test sources.
ac_ext=f
# Object file extension for compiled f77 test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# No sense in running all these tests if we already determined that
# the F77 compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
if test yes != "$_lt_disable_F77"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="\
subroutine t
return
end
"
# Code to be used in simple link tests
lt_simple_link_test_code="\
program t
end
"
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_GCC=$GCC
lt_save_CFLAGS=$CFLAGS
CC=${F77-"f77"}
CFLAGS=$FFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
GCC=$G77
if test -n "$compiler"; then
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
if test ia64 != "$host_cpu"; then
case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
yes,aix,yes) ;; # shared object as lib.so file only
yes,svr4,*) ;; # shared object as lib.so archive member only
yes,*) enable_static=no ;; # shared object in lib.a archive as well
esac
fi
;;
esac
AC_MSG_RESULT([$enable_shared])
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
_LT_TAGVAR(GCC, $1)=$G77
_LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_SYS_DYNAMIC_LINKER($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi # test -n "$compiler"
GCC=$lt_save_GCC
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
fi # test yes != "$_lt_disable_F77"
AC_LANG_POP
])# _LT_LANG_F77_CONFIG
# _LT_LANG_FC_CONFIG([TAG])
# -------------------------
# Ensure that the configuration variables for a Fortran compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_FC_CONFIG],
[AC_LANG_PUSH(Fortran)
if test -z "$FC" || test no = "$FC"; then
_lt_disable_FC=yes
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=no
_LT_TAGVAR(inherit_rpath, $1)=no
_LT_TAGVAR(module_cmds, $1)=
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
# Source file extension for fc test sources.
ac_ext=${ac_fc_srcext-f}
# Object file extension for compiled fc test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# No sense in running all these tests if we already determined that
# the FC compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
if test yes != "$_lt_disable_FC"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="\
subroutine t
return
end
"
# Code to be used in simple link tests
lt_simple_link_test_code="\
program t
end
"
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_GCC=$GCC
lt_save_CFLAGS=$CFLAGS
CC=${FC-"f95"}
CFLAGS=$FCFLAGS
compiler=$CC
GCC=$ac_cv_fc_compiler_gnu
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
if test -n "$compiler"; then
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
if test ia64 != "$host_cpu"; then
case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
yes,aix,yes) ;; # shared object as lib.so file only
yes,svr4,*) ;; # shared object as lib.so archive member only
yes,*) enable_static=no ;; # shared object in lib.a archive as well
esac
fi
;;
esac
AC_MSG_RESULT([$enable_shared])
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
_LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu
_LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
_LT_SYS_HIDDEN_LIBDEPS($1)
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_SYS_DYNAMIC_LINKER($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi # test -n "$compiler"
GCC=$lt_save_GCC
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
fi # test yes != "$_lt_disable_FC"
AC_LANG_POP
])# _LT_LANG_FC_CONFIG
# _LT_LANG_GCJ_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for the GNU Java Compiler compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_GCJ_CONFIG],
[AC_REQUIRE([LT_PROG_GCJ])dnl
AC_LANG_SAVE
# Source file extension for Java test sources.
ac_ext=java
# Object file extension for compiled Java test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# Code to be used in simple compile tests
lt_simple_compile_test_code="class foo {}"
# Code to be used in simple link tests
lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=yes
CC=${GCJ-"gcj"}
CFLAGS=$GCJFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_TAGVAR(LD, $1)=$LD
_LT_CC_BASENAME([$compiler])
# GCJ did not exist at the time GCC didn't implicitly link libc in.
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
if test -n "$compiler"; then
_LT_COMPILER_NO_RTTI($1)
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi
AC_LANG_RESTORE
GCC=$lt_save_GCC
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
])# _LT_LANG_GCJ_CONFIG
# _LT_LANG_GO_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for the GNU Go compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_GO_CONFIG],
[AC_REQUIRE([LT_PROG_GO])dnl
AC_LANG_SAVE
# Source file extension for Go test sources.
ac_ext=go
# Object file extension for compiled Go test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# Code to be used in simple compile tests
lt_simple_compile_test_code="package main; func main() { }"
# Code to be used in simple link tests
lt_simple_link_test_code='package main; func main() { }'
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=yes
CC=${GOC-"gccgo"}
CFLAGS=$GOFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_TAGVAR(LD, $1)=$LD
_LT_CC_BASENAME([$compiler])
# Go did not exist at the time GCC didn't implicitly link libc in.
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
if test -n "$compiler"; then
_LT_COMPILER_NO_RTTI($1)
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi
AC_LANG_RESTORE
GCC=$lt_save_GCC
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
])# _LT_LANG_GO_CONFIG
# _LT_LANG_RC_CONFIG([TAG])
# -------------------------
# Ensure that the configuration variables for the Windows resource compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_RC_CONFIG],
[AC_REQUIRE([LT_PROG_RC])dnl
AC_LANG_SAVE
# Source file extension for RC test sources.
ac_ext=rc
# Object file extension for compiled RC test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# Code to be used in simple compile tests
lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
# Code to be used in simple link tests
lt_simple_link_test_code=$lt_simple_compile_test_code
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=
CC=${RC-"windres"}
CFLAGS=
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
if test -n "$compiler"; then
:
_LT_CONFIG($1)
fi
GCC=$lt_save_GCC
AC_LANG_RESTORE
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
])# _LT_LANG_RC_CONFIG
# LT_PROG_GCJ
# -----------
AC_DEFUN([LT_PROG_GCJ],
[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
[m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
[AC_CHECK_TOOL(GCJ, gcj,)
test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2"
AC_SUBST(GCJFLAGS)])])[]dnl
])
# Old name:
AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
# LT_PROG_GO
# ----------
AC_DEFUN([LT_PROG_GO],
[AC_CHECK_TOOL(GOC, gccgo,)
])
# LT_PROG_RC
# ----------
AC_DEFUN([LT_PROG_RC],
[AC_CHECK_TOOL(RC, windres,)
])
# Old name:
AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([LT_AC_PROG_RC], [])
# _LT_DECL_EGREP
# --------------
# If we don't have a new enough Autoconf to choose the best grep
# available, choose the one first in the user's PATH.
m4_defun([_LT_DECL_EGREP],
[AC_REQUIRE([AC_PROG_EGREP])dnl
AC_REQUIRE([AC_PROG_FGREP])dnl
test -z "$GREP" && GREP=grep
_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
_LT_DECL([], [EGREP], [1], [An ERE matcher])
_LT_DECL([], [FGREP], [1], [A literal string matcher])
dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
AC_SUBST([GREP])
])
# _LT_DECL_OBJDUMP
# --------------
# If we don't have a new enough Autoconf to choose the best objdump
# available, choose the one first in the user's PATH.
m4_defun([_LT_DECL_OBJDUMP],
[AC_CHECK_TOOL(OBJDUMP, objdump, false)
test -z "$OBJDUMP" && OBJDUMP=objdump
_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
AC_SUBST([OBJDUMP])
])
# _LT_DECL_DLLTOOL
# ----------------
# Ensure DLLTOOL variable is set.
m4_defun([_LT_DECL_DLLTOOL],
[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
test -z "$DLLTOOL" && DLLTOOL=dlltool
_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
AC_SUBST([DLLTOOL])
])
# _LT_DECL_SED
# ------------
# Check for a fully-functional sed program, that truncates
# as few characters as possible. Prefer GNU sed if found.
m4_defun([_LT_DECL_SED],
[AC_PROG_SED
test -z "$SED" && SED=sed
Xsed="$SED -e 1s/^X//"
_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
[Sed that helps us avoid accidentally triggering echo(1) options like -n])
])# _LT_DECL_SED
m4_ifndef([AC_PROG_SED], [
############################################################
# NOTE: This macro has been submitted for inclusion into #
# GNU Autoconf as AC_PROG_SED. When it is available in #
# a released version of Autoconf we should remove this #
# macro and use it instead. #
############################################################
m4_defun([AC_PROG_SED],
[AC_MSG_CHECKING([for a sed that does not truncate output])
AC_CACHE_VAL(lt_cv_path_SED,
[# Loop through the user's path and test for sed and gsed.
# Then use that list of sed's as ones to test for truncation.
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for lt_ac_prog in sed gsed; do
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
fi
done
done
done
IFS=$as_save_IFS
lt_ac_max=0
lt_ac_count=0
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
test ! -f "$lt_ac_sed" && continue
cat /dev/null > conftest.in
lt_ac_count=0
echo $ECHO_N "0123456789$ECHO_C" >conftest.in
# Check for GNU sed and select it if it is found.
if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
lt_cv_path_SED=$lt_ac_sed
break
fi
while true; do
cat conftest.in conftest.in >conftest.tmp
mv conftest.tmp conftest.in
cp conftest.in conftest.nl
echo >>conftest.nl
$lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
cmp -s conftest.out conftest.nl || break
# 10000 chars as input seems more than enough
test 10 -lt "$lt_ac_count" && break
lt_ac_count=`expr $lt_ac_count + 1`
if test "$lt_ac_count" -gt "$lt_ac_max"; then
lt_ac_max=$lt_ac_count
lt_cv_path_SED=$lt_ac_sed
fi
done
done
])
SED=$lt_cv_path_SED
AC_SUBST([SED])
AC_MSG_RESULT([$SED])
])#AC_PROG_SED
])#m4_ifndef
# Old name:
AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([LT_AC_PROG_SED], [])
# _LT_CHECK_SHELL_FEATURES
# ------------------------
# Find out whether the shell is Bourne or XSI compatible,
# or has some other useful features.
m4_defun([_LT_CHECK_SHELL_FEATURES],
[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
lt_unset=unset
else
lt_unset=false
fi
_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
# test EBCDIC or ASCII
case `echo X|tr X '\101'` in
A) # ASCII based system
# \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
lt_SP2NL='tr \040 \012'
lt_NL2SP='tr \015\012 \040\040'
;;
*) # EBCDIC based system
lt_SP2NL='tr \100 \n'
lt_NL2SP='tr \r\n \100\100'
;;
esac
_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
])# _LT_CHECK_SHELL_FEATURES
# _LT_PATH_CONVERSION_FUNCTIONS
# -----------------------------
# Determine what file name conversion functions should be used by
# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
# for certain cross-compile configurations and native mingw.
m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_MSG_CHECKING([how to convert $build file names to $host format])
AC_CACHE_VAL(lt_cv_to_host_file_cmd,
[case $host in
*-*-mingw* )
case $build in
*-*-mingw* ) # actually msys
lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
;;
*-*-cygwin* )
lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
;;
* ) # otherwise, assume *nix
lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
;;
esac
;;
*-*-cygwin* )
case $build in
*-*-mingw* ) # actually msys
lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
;;
*-*-cygwin* )
lt_cv_to_host_file_cmd=func_convert_file_noop
;;
* ) # otherwise, assume *nix
lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
;;
esac
;;
* ) # unhandled hosts (and "normal" native builds)
lt_cv_to_host_file_cmd=func_convert_file_noop
;;
esac
])
to_host_file_cmd=$lt_cv_to_host_file_cmd
AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
[0], [convert $build file names to $host format])dnl
AC_MSG_CHECKING([how to convert $build file names to toolchain format])
AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
[#assume ordinary cross tools, or native build.
lt_cv_to_tool_file_cmd=func_convert_file_noop
case $host in
*-*-mingw* )
case $build in
*-*-mingw* ) # actually msys
lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
;;
esac
;;
esac
])
to_tool_file_cmd=$lt_cv_to_tool_file_cmd
AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
[0], [convert $build files to toolchain format])dnl
])# _LT_PATH_CONVERSION_FUNCTIONS
# Helper functions for option handling. -*- Autoconf -*-
#
# Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software
# Foundation, Inc.
# Written by Gary V. Vaughan, 2004
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
# serial 8 ltoptions.m4
# This is to help aclocal find these macros, as it can't see m4_define.
AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
# ------------------------------------------
m4_define([_LT_MANGLE_OPTION],
[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
# ---------------------------------------
# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
# matching handler defined, dispatch to it. Other OPTION-NAMEs are
# saved as a flag.
m4_define([_LT_SET_OPTION],
[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
_LT_MANGLE_DEFUN([$1], [$2]),
[m4_warning([Unknown $1 option '$2'])])[]dnl
])
# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
# ------------------------------------------------------------
# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
m4_define([_LT_IF_OPTION],
[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
# -------------------------------------------------------
# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
# are set.
m4_define([_LT_UNLESS_OPTIONS],
[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
[m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
[m4_define([$0_found])])])[]dnl
m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
])[]dnl
])
# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
# ----------------------------------------
# OPTION-LIST is a space-separated list of Libtool options associated
# with MACRO-NAME. If any OPTION has a matching handler declared with
# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
# the unknown option and exit.
m4_defun([_LT_SET_OPTIONS],
[# Set options
m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
[_LT_SET_OPTION([$1], _LT_Option)])
m4_if([$1],[LT_INIT],[
dnl
dnl Simply set some default values (i.e off) if boolean options were not
dnl specified:
_LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
])
_LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
])
dnl
dnl If no reference was made to various pairs of opposing options, then
dnl we run the default mode handler for the pair. For example, if neither
dnl 'shared' nor 'disable-shared' was passed, we enable building of shared
dnl archives by default:
_LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
_LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
_LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
_LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
[_LT_ENABLE_FAST_INSTALL])
_LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4],
[_LT_WITH_AIX_SONAME([aix])])
])
])# _LT_SET_OPTIONS
## --------------------------------- ##
## Macros to handle LT_INIT options. ##
## --------------------------------- ##
# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
# -----------------------------------------
m4_define([_LT_MANGLE_DEFUN],
[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
# -----------------------------------------------
m4_define([LT_OPTION_DEFINE],
[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
])# LT_OPTION_DEFINE
# dlopen
# ------
LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
])
AU_DEFUN([AC_LIBTOOL_DLOPEN],
[_LT_SET_OPTION([LT_INIT], [dlopen])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
put the 'dlopen' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
# win32-dll
# ---------
# Declare package support for building win32 dll's.
LT_OPTION_DEFINE([LT_INIT], [win32-dll],
[enable_win32_dll=yes
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
AC_CHECK_TOOL(AS, as, false)
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
esac
test -z "$AS" && AS=as
_LT_DECL([], [AS], [1], [Assembler program])dnl
test -z "$DLLTOOL" && DLLTOOL=dlltool
_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
test -z "$OBJDUMP" && OBJDUMP=objdump
_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
])# win32-dll
AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
_LT_SET_OPTION([LT_INIT], [win32-dll])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
put the 'win32-dll' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
# _LT_ENABLE_SHARED([DEFAULT])
# ----------------------------
# implement the --enable-shared flag, and supports the 'shared' and
# 'disable-shared' LT_INIT options.
# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_SHARED],
[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([shared],
[AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
[build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
[p=${PACKAGE-default}
case $enableval in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
IFS=$lt_save_ifs
;;
esac],
[enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
_LT_DECL([build_libtool_libs], [enable_shared], [0],
[Whether or not to build shared libraries])
])# _LT_ENABLE_SHARED
LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
# Old names:
AC_DEFUN([AC_ENABLE_SHARED],
[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
])
AC_DEFUN([AC_DISABLE_SHARED],
[_LT_SET_OPTION([LT_INIT], [disable-shared])
])
AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AM_ENABLE_SHARED], [])
dnl AC_DEFUN([AM_DISABLE_SHARED], [])
# _LT_ENABLE_STATIC([DEFAULT])
# ----------------------------
# implement the --enable-static flag, and support the 'static' and
# 'disable-static' LT_INIT options.
# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_STATIC],
[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([static],
[AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
[build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
[p=${PACKAGE-default}
case $enableval in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
IFS=$lt_save_ifs
;;
esac],
[enable_static=]_LT_ENABLE_STATIC_DEFAULT)
_LT_DECL([build_old_libs], [enable_static], [0],
[Whether or not to build static libraries])
])# _LT_ENABLE_STATIC
LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
# Old names:
AC_DEFUN([AC_ENABLE_STATIC],
[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
])
AC_DEFUN([AC_DISABLE_STATIC],
[_LT_SET_OPTION([LT_INIT], [disable-static])
])
AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AM_ENABLE_STATIC], [])
dnl AC_DEFUN([AM_DISABLE_STATIC], [])
# _LT_ENABLE_FAST_INSTALL([DEFAULT])
# ----------------------------------
# implement the --enable-fast-install flag, and support the 'fast-install'
# and 'disable-fast-install' LT_INIT options.
# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_FAST_INSTALL],
[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([fast-install],
[AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
[optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
[p=${PACKAGE-default}
case $enableval in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
IFS=$lt_save_ifs
;;
esac],
[enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
_LT_DECL([fast_install], [enable_fast_install], [0],
[Whether or not to optimize for fast installation])dnl
])# _LT_ENABLE_FAST_INSTALL
LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
# Old names:
AU_DEFUN([AC_ENABLE_FAST_INSTALL],
[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you put
the 'fast-install' option into LT_INIT's first parameter.])
])
AU_DEFUN([AC_DISABLE_FAST_INSTALL],
[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you put
the 'disable-fast-install' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
# _LT_WITH_AIX_SONAME([DEFAULT])
# ----------------------------------
# implement the --with-aix-soname flag, and support the `aix-soname=aix'
# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT
# is either `aix', `both' or `svr4'. If omitted, it defaults to `aix'.
m4_define([_LT_WITH_AIX_SONAME],
[m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl
shared_archive_member_spec=
case $host,$enable_shared in
power*-*-aix[[5-9]]*,yes)
AC_MSG_CHECKING([which variant of shared library versioning to provide])
AC_ARG_WITH([aix-soname],
[AS_HELP_STRING([--with-aix-soname=aix|svr4|both],
[shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])],
[case $withval in
aix|svr4|both)
;;
*)
AC_MSG_ERROR([Unknown argument to --with-aix-soname])
;;
esac
lt_cv_with_aix_soname=$with_aix_soname],
[AC_CACHE_VAL([lt_cv_with_aix_soname],
[lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT)
with_aix_soname=$lt_cv_with_aix_soname])
AC_MSG_RESULT([$with_aix_soname])
if test aix != "$with_aix_soname"; then
# For the AIX way of multilib, we name the shared archive member
# based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
# and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
# Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
# the AIX toolchain works better with OBJECT_MODE set (default 32).
if test 64 = "${OBJECT_MODE-32}"; then
shared_archive_member_spec=shr_64
else
shared_archive_member_spec=shr
fi
fi
;;
*)
with_aix_soname=aix
;;
esac
_LT_DECL([], [shared_archive_member_spec], [0],
[Shared archive member basename, for filename based shared library versioning on AIX])dnl
])# _LT_WITH_AIX_SONAME
LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])])
LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])])
LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])])
# _LT_WITH_PIC([MODE])
# --------------------
# implement the --with-pic flag, and support the 'pic-only' and 'no-pic'
# LT_INIT options.
# MODE is either 'yes' or 'no'. If omitted, it defaults to 'both'.
m4_define([_LT_WITH_PIC],
[AC_ARG_WITH([pic],
[AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
[lt_p=${PACKAGE-default}
case $withval in
yes|no) pic_mode=$withval ;;
*)
pic_mode=default
# Look at the argument we got. We use all the common list separators.
lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for lt_pkg in $withval; do
IFS=$lt_save_ifs
if test "X$lt_pkg" = "X$lt_p"; then
pic_mode=yes
fi
done
IFS=$lt_save_ifs
;;
esac],
[pic_mode=m4_default([$1], [default])])
_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
])# _LT_WITH_PIC
LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
# Old name:
AU_DEFUN([AC_LIBTOOL_PICMODE],
[_LT_SET_OPTION([LT_INIT], [pic-only])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
put the 'pic-only' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
## ----------------- ##
## LTDL_INIT Options ##
## ----------------- ##
m4_define([_LTDL_MODE], [])
LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
[m4_define([_LTDL_MODE], [nonrecursive])])
LT_OPTION_DEFINE([LTDL_INIT], [recursive],
[m4_define([_LTDL_MODE], [recursive])])
LT_OPTION_DEFINE([LTDL_INIT], [subproject],
[m4_define([_LTDL_MODE], [subproject])])
m4_define([_LTDL_TYPE], [])
LT_OPTION_DEFINE([LTDL_INIT], [installable],
[m4_define([_LTDL_TYPE], [installable])])
LT_OPTION_DEFINE([LTDL_INIT], [convenience],
[m4_define([_LTDL_TYPE], [convenience])])
# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
#
# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software
# Foundation, Inc.
# Written by Gary V. Vaughan, 2004
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
# serial 6 ltsugar.m4
# This is to help aclocal find these macros, as it can't see m4_define.
AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
# lt_join(SEP, ARG1, [ARG2...])
# -----------------------------
# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
# associated separator.
# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
# versions in m4sugar had bugs.
m4_define([lt_join],
[m4_if([$#], [1], [],
[$#], [2], [[$2]],
[m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
m4_define([_lt_join],
[m4_if([$#$2], [2], [],
[m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
# lt_car(LIST)
# lt_cdr(LIST)
# ------------
# Manipulate m4 lists.
# These macros are necessary as long as will still need to support
# Autoconf-2.59, which quotes differently.
m4_define([lt_car], [[$1]])
m4_define([lt_cdr],
[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
[$#], 1, [],
[m4_dquote(m4_shift($@))])])
m4_define([lt_unquote], $1)
# lt_append(MACRO-NAME, STRING, [SEPARATOR])
# ------------------------------------------
# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'.
# Note that neither SEPARATOR nor STRING are expanded; they are appended
# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
# No SEPARATOR is output if MACRO-NAME was previously undefined (different
# than defined and empty).
#
# This macro is needed until we can rely on Autoconf 2.62, since earlier
# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
m4_define([lt_append],
[m4_define([$1],
m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
# ----------------------------------------------------------
# Produce a SEP delimited list of all paired combinations of elements of
# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list
# has the form PREFIXmINFIXSUFFIXn.
# Needed until we can rely on m4_combine added in Autoconf 2.62.
m4_define([lt_combine],
[m4_if(m4_eval([$# > 3]), [1],
[m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
[[m4_foreach([_Lt_prefix], [$2],
[m4_foreach([_Lt_suffix],
]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
[_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
# -----------------------------------------------------------------------
# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
m4_define([lt_if_append_uniq],
[m4_ifdef([$1],
[m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
[lt_append([$1], [$2], [$3])$4],
[$5])],
[lt_append([$1], [$2], [$3])$4])])
# lt_dict_add(DICT, KEY, VALUE)
# -----------------------------
m4_define([lt_dict_add],
[m4_define([$1($2)], [$3])])
# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
# --------------------------------------------
m4_define([lt_dict_add_subkey],
[m4_define([$1($2:$3)], [$4])])
# lt_dict_fetch(DICT, KEY, [SUBKEY])
# ----------------------------------
m4_define([lt_dict_fetch],
[m4_ifval([$3],
m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
# -----------------------------------------------------------------
m4_define([lt_if_dict_fetch],
[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
[$5],
[$6])])
# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
# --------------------------------------------------------------
m4_define([lt_dict_filter],
[m4_if([$5], [], [],
[lt_join(m4_quote(m4_default([$4], [[, ]])),
lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
[lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
])
# ltversion.m4 -- version numbers -*- Autoconf -*-
#
# Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc.
# Written by Scott James Remnant, 2004
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
# @configure_input@
# serial 4179 ltversion.m4
# This file is part of GNU Libtool
m4_define([LT_PACKAGE_VERSION], [2.4.6])
m4_define([LT_PACKAGE_REVISION], [2.4.6])
AC_DEFUN([LTVERSION_VERSION],
[macro_version='2.4.6'
macro_revision='2.4.6'
_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
_LT_DECL(, macro_revision, 0)
])
# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
#
# Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software
# Foundation, Inc.
# Written by Scott James Remnant, 2004.
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
# serial 5 lt~obsolete.m4
# These exist entirely to fool aclocal when bootstrapping libtool.
#
# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN),
# which have later been changed to m4_define as they aren't part of the
# exported API, or moved to Autoconf or Automake where they belong.
#
# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN
# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
# using a macro with the same name in our local m4/libtool.m4 it'll
# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
# and doesn't know about Autoconf macros at all.)
#
# So we provide this file, which has a silly filename so it's always
# included after everything else. This provides aclocal with the
# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
# because those macros already exist, or will be overwritten later.
# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
#
# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
# Yes, that means every name once taken will need to remain here until
# we give up compatibility with versions before 1.7, at which point
# we need to keep only those names which we still refer to.
# This is to help aclocal find these macros, as it can't see m4_define.
AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])])
m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])])
m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])])
m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])])
m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])])
m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])])
m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])])
m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])])
m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])])
m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])])
m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])])
m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])])
m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])])
m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])])
m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])])
m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])])
m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])])
m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])])
m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])])
m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])])
Mini Shell