Current File : //proc/thread-self/root/proc/self/root/proc/self/root/usr/lib/dracut/dracut-logger.sh
#!/bin/bash
#
# logging faciality module for dracut both at build- and boot-time
#
# Copyright 2010 Amadeusz Żołnowski <aidecoe@aidecoe.name>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
__DRACUT_LOGGER__=1
## @brief Logging facility module for dracut both at build- and boot-time.
#
# @section intro Introduction
#
# The logger takes a bit from Log4j philosophy. There are defined 6 logging
# levels:
# - TRACE (6)
# The TRACE Level designates finer-grained informational events than the
# DEBUG.
# - DEBUG (5)
# The DEBUG Level designates fine-grained informational events that are most
# useful to debug an application.
# - INFO (4)
# The INFO level designates informational messages that highlight the
# progress of the application at coarse-grained level.
# - WARN (3)
# The WARN level designates potentially harmful situations.
# - ERROR (2)
# The ERROR level designates error events that might still allow the
# application to continue running.
# - FATAL (1)
# The FATAL level designates very severe error events that will presumably
# lead the application to abort.
# Descriptions are borrowed from Log4j documentation:
# http://logging.apache.org/log4j/1.2/apidocs/org/apache/log4j/Level.html
#
# @section usage Usage
#
# First of all you have to start with dlog_init() function which initializes
# required variables. Don't call any other logging function before that one!
# If you're ready with this, you can use following functions which corresponds
# clearly to levels listed in @ref intro Introduction. Here they are:
# - dtrace()
# - ddebug()
# - dinfo()
# - dwarn()
# - derror()
# - dfatal()
# They take all arguments given as a single message to be logged. See dlog()
# function for details how it works. Note that you shouldn't use dlog() by
# yourself. It's wrapped with above functions.
#
# @see dlog_init() dlog()
#
# @section conf Configuration
#
# Logging is controlled by following global variables:
# - @var stdloglvl - logging level to standard error (console output)
# - @var sysloglvl - logging level to syslog (by logger command)
# - @var fileloglvl - logging level to file
# - @var kmsgloglvl - logging level to /dev/kmsg (only for boot-time)
# - @var logfile - log file which is used when @var fileloglvl is higher
# than 0
# and two global variables: @var maxloglvl and @var syslogfacility which <b>must
# not</b> be overwritten. Both are set by dlog_init(). @var maxloglvl holds
# maximum logging level of those three and indicates that dlog_init() was run.
# @var syslogfacility is set either to 'user' (when building initramfs) or
# 'daemon' (when booting).
#
# Logging level set by the variable means that messages from this logging level
# and above (FATAL is the highest) will be shown. Logging levels may be set
# independently for each destination (stderr, syslog, file, kmsg).
#
# @see dlog_init()
## @brief Initializes dracut Logger.
#
# @retval 1 if something has gone wrong
# @retval 0 on success.
#
# @note This function need to be called before any other from this file.
#
# If any of the variables is not set, this function set it to default:
# - @var stdloglvl = 4 (info)
# - @var sysloglvl = 0 (no logging)
# - @var fileloglvl is set to 4 when @var logfile is set too, otherwise it's
# - @var kmsgloglvl = 0 (no logging)
# set to 0
#
# @warning Function sets global variables @var maxloglvl and @syslogfacility.
# See file doc comment for details.
dlog_init() {
local __oldumask
local ret=0; local errmsg
[ -z "$stdloglvl" ] && stdloglvl=4
[ -z "$sysloglvl" ] && sysloglvl=0
[ -z "$kmsgloglvl" ] && kmsgloglvl=0
# Skip initialization if it's already done.
[ -n "$maxloglvl" ] && return 0
if [ -z "$fileloglvl" ]; then
[ -w "$logfile" ] && fileloglvl=4 || fileloglvl=0
elif (( $fileloglvl > 0 )); then
if [[ $logfile ]]; then
__oldumask=$(umask)
umask 0377
! [ -e "$logfile" ] && >"$logfile"
umask $__oldumask
if [ -w "$logfile" -a -f "$logfile" ]; then
# Mark new run in the log file
echo >>"$logfile"
if command -v date >/dev/null; then
echo "=== $(date) ===" >>"$logfile"
else
echo "===============================================" >>"$logfile"
fi
echo >>"$logfile"
else
# We cannot log to file, so turn this facility off.
fileloglvl=0
ret=1
errmsg="'$logfile' is not a writable file"
fi
fi
fi
if (( $UID != 0 )); then
kmsgloglvl=0
sysloglvl=0
fi
if (( $sysloglvl > 0 )); then
if [[ -d /run/systemd/journal ]] \
&& type -P systemd-cat &>/dev/null \
&& systemctl --quiet is-active systemd-journald.socket &>/dev/null \
&& { echo "dracut-$DRACUT_VERSION" | systemd-cat -t 'dracut' &>/dev/null; } ; then
readonly _systemdcatfile="$DRACUT_TMPDIR/systemd-cat"
mkfifo "$_systemdcatfile"
readonly _dlogfd=15
systemd-cat -t 'dracut' --level-prefix=true <"$_systemdcatfile" &
exec 15>"$_systemdcatfile"
elif ! [ -S /dev/log -a -w /dev/log ] || ! command -v logger >/dev/null; then
# We cannot log to syslog, so turn this facility off.
kmsgloglvl=$sysloglvl
sysloglvl=0
ret=1
errmsg="No '/dev/log' or 'logger' included for syslog logging"
fi
fi
if (($sysloglvl > 0)) || (($kmsgloglvl > 0 )); then
if [ -n "$dracutbasedir" ]; then
readonly syslogfacility=user
else
readonly syslogfacility=daemon
fi
export syslogfacility
fi
local lvl; local maxloglvl_l=0
for lvl in $stdloglvl $sysloglvl $fileloglvl $kmsgloglvl; do
(( $lvl > $maxloglvl_l )) && maxloglvl_l=$lvl
done
readonly maxloglvl=$maxloglvl_l
export maxloglvl
if (($stdloglvl < 6)) && (($kmsgloglvl < 6)) && (($fileloglvl < 6)) && (($sysloglvl < 6)); then
unset dtrace
dtrace() { :; };
fi
if (($stdloglvl < 5)) && (($kmsgloglvl < 5)) && (($fileloglvl < 5)) && (($sysloglvl < 5)); then
unset ddebug
ddebug() { :; };
fi
if (($stdloglvl < 4)) && (($kmsgloglvl < 4)) && (($fileloglvl < 4)) && (($sysloglvl < 4)); then
unset dinfo
dinfo() { :; };
fi
if (($stdloglvl < 3)) && (($kmsgloglvl < 3)) && (($fileloglvl < 3)) && (($sysloglvl < 3)); then
unset dwarn
dwarn() { :; };
unset dwarning
dwarning() { :; };
fi
if (($stdloglvl < 2)) && (($kmsgloglvl < 2)) && (($fileloglvl < 2)) && (($sysloglvl < 2)); then
unset derror
derror() { :; };
fi
if (($stdloglvl < 1)) && (($kmsgloglvl < 1)) && (($fileloglvl < 1)) && (($sysloglvl < 1)); then
unset dfatal
dfatal() { :; };
fi
[ -n "$errmsg" ] && derror "$errmsg"
return $ret
}
## @brief Converts numeric logging level to the first letter of level name.
#
# @param lvl Numeric logging level in range from 1 to 6.
# @retval 1 if @a lvl is out of range.
# @retval 0 if @a lvl is correct.
# @result Echoes first letter of level name.
_lvl2char() {
case "$1" in
1) echo F;;
2) echo E;;
3) echo W;;
4) echo I;;
5) echo D;;
6) echo T;;
*) return 1;;
esac
}
## @brief Converts numeric level to logger priority defined by POSIX.2.
#
# @param lvl Numeric logging level in range from 1 to 6.
# @retval 1 if @a lvl is out of range.
# @retval 0 if @a lvl is correct.
# @result Echoes logger priority.
_lvl2syspri() {
printf $syslogfacility.
case "$1" in
1) echo crit;;
2) echo error;;
3) echo warning;;
4) echo info;;
5) echo debug;;
6) echo debug;;
*) return 1;;
esac
}
## @brief Converts dracut-logger numeric level to syslog log level
#
# @param lvl Numeric logging level in range from 1 to 6.
# @retval 1 if @a lvl is out of range.
# @retval 0 if @a lvl is correct.
# @result Echoes kernel console numeric log level
#
# Conversion is done as follows:
#
# <tt>
# none -> LOG_EMERG (0)
# none -> LOG_ALERT (1)
# FATAL(1) -> LOG_CRIT (2)
# ERROR(2) -> LOG_ERR (3)
# WARN(3) -> LOG_WARNING (4)
# none -> LOG_NOTICE (5)
# INFO(4) -> LOG_INFO (6)
# DEBUG(5) -> LOG_DEBUG (7)
# TRACE(6) /
# </tt>
#
# @see /usr/include/sys/syslog.h
_dlvl2syslvl() {
local lvl
case "$1" in
1) lvl=2;;
2) lvl=3;;
3) lvl=4;;
4) lvl=6;;
5) lvl=7;;
6) lvl=7;;
*) return 1;;
esac
[ "$syslogfacility" = user ] && echo $((8+$lvl)) || echo $((24+$lvl))
}
## @brief Prints to stderr and/or writes to file, to syslog and/or /dev/kmsg
# given message with given level (priority).
#
# @param lvl Numeric logging level.
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
#
# @note This function is not supposed to be called manually. Please use
# dtrace(), ddebug(), or others instead which wrap this one.
#
# This is core logging function which logs given message to standard error, file
# and/or syslog (with POSIX shell command <tt>logger</tt>) and/or to /dev/kmsg.
# The format is following:
#
# <tt>X: some message</tt>
#
# where @c X is the first letter of logging level. See module description for
# details on that.
#
# Message to syslog is sent with tag @c dracut. Priorities are mapped as
# following:
# - @c FATAL to @c crit
# - @c ERROR to @c error
# - @c WARN to @c warning
# - @c INFO to @c info
# - @c DEBUG and @c TRACE both to @c debug
_do_dlog() {
local lvl="$1"; shift
local lvlc=$(_lvl2char "$lvl") || return 0
local msg="$*"
local lmsg="$lvlc: $*"
(( $lvl <= $stdloglvl )) && printf -- 'dracut: %s\n' "$msg" >&2
if (( $lvl <= $sysloglvl )); then
if [[ "$_dlogfd" ]]; then
printf -- "<%s>%s\n" "$(($(_dlvl2syslvl $lvl) & 7))" "$msg" >&$_dlogfd
else
logger -t "dracut[$$]" -p $(_lvl2syspri $lvl) -- "$msg"
fi
fi
if (( $lvl <= $fileloglvl )) && [[ -w "$logfile" ]] && [[ -f "$logfile" ]]; then
echo "$lmsg" >>"$logfile"
fi
(( $lvl <= $kmsgloglvl )) && \
echo "<$(_dlvl2syslvl $lvl)>dracut[$$] $msg" >/dev/kmsg
}
## @brief Internal helper function for _do_dlog()
#
# @param lvl Numeric logging level.
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
#
# @note This function is not supposed to be called manually. Please use
# dtrace(), ddebug(), or others instead which wrap this one.
#
# This function calls _do_dlog() either with parameter msg, or if
# none is given, it will read standard input and will use every line as
# a message.
#
# This enables:
# dwarn "This is a warning"
# echo "This is a warning" | dwarn
dlog() {
[ -z "$maxloglvl" ] && return 0
(( $1 <= $maxloglvl )) || return 0
if (( $# > 1 )); then
_do_dlog "$@"
else
while read line || [ -n "$line" ]; do
_do_dlog "$1" "$line"
done
fi
}
## @brief Logs message at TRACE level (6)
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
dtrace() {
set +x
dlog 6 "$@"
[ -n "$debug" ] && set -x || :
}
## @brief Logs message at DEBUG level (5)
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
ddebug() {
set +x
dlog 5 "$@"
[ -n "$debug" ] && set -x || :
}
## @brief Logs message at INFO level (4)
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
dinfo() {
set +x
dlog 4 "$@"
[ -n "$debug" ] && set -x || :
}
## @brief Logs message at WARN level (3)
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
dwarn() {
set +x
dlog 3 "$@"
[ -n "$debug" ] && set -x || :
}
## @brief It's an alias to dwarn() function.
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
dwarning() {
set +x
dwarn "$@"
[ -n "$debug" ] && set -x || :
}
## @brief Logs message at ERROR level (2)
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
derror() {
set +x
dlog 2 "$@"
[ -n "$debug" ] && set -x || :
}
## @brief Logs message at FATAL level (1)
#
# @param msg Message.
# @retval 0 It's always returned, even if logging failed.
dfatal() {
set +x
dlog 1 "$@"
[ -n "$debug" ] && set -x || :
}
Mini Shell