Current File : //proc/thread-self/root/proc/thread-self/root/lib/firmware/cxgb4/configs/t5-config-default.txt
# Chelsio T5 Factory Default configuration file.
#
# Copyright (C) 2010-2015 Chelsio Communications. All rights reserved.
#
# DO NOT MODIFY THIS FILE UNDER ANY CIRCUMSTANCES. MODIFICATION OF THIS FILE
# WILL RESULT IN A NON-FUNCTIONAL ADAPTER AND MAY RESULT IN PHYSICAL DAMAGE
# TO ADAPTERS.
# This file provides the default, power-on configuration for 4-port T5-based
# adapters shipped from the factory. These defaults are designed to address
# the needs of the vast majority of Terminator customers. The basic idea is to
# have a default configuration which allows a customer to plug a Terminator
# adapter in and have it work regardless of OS, driver or application except in
# the most unusual and/or demanding customer applications.
#
# Many of the Terminator resources which are described by this configuration
# are finite. This requires balancing the configuration/operation needs of
# device drivers across OSes and a large number of customer application.
#
# Some of the more important resources to allocate and their constaints are:
# 1. Virtual Interfaces: 256.
# 2. Ingress Queues with Free Lists: 1024.
# 3. Egress Queues: 128K.
# 4. MSI-X Vectors: 1088.
# 5. Multi-Port Support (MPS) TCAM: 336 entries to support MAC destination
# address matching on Ingress Packets.
#
# Some of the important OS/Driver resource needs are:
# 6. Some OS Drivers will manage all resources through a single Physical
# Function (currently PF4 but it could be any Physical Function).
# 7. Some OS Drivers will manage different ports and functions (NIC,
# storage, etc.) on different Physical Functions. For example, NIC
# functions for ports 0-3 on PF0-3, FCoE on PF4, iSCSI on PF5, etc.
#
# Some of the customer application needs which need to be accommodated:
# 8. Some customers will want to support large CPU count systems with
# good scaling. Thus, we'll need to accommodate a number of
# Ingress Queues and MSI-X Vectors to allow up to some number of CPUs
# to be involved per port and per application function. For example,
# in the case where all ports and application functions will be
# managed via a single Unified PF and we want to accommodate scaling up
# to 8 CPUs, we would want:
#
# 4 ports *
# 3 application functions (NIC, FCoE, iSCSI) per port *
# 8 Ingress Queue/MSI-X Vectors per application function
#
# for a total of 96 Ingress Queues and MSI-X Vectors on the Unified PF.
# (Plus a few for Firmware Event Queues, etc.)
#
# 9. Some customers will want to use PCI-E SR-IOV Capability to allow Virtual
# Machines to directly access T6 functionality via SR-IOV Virtual Functions
# and "PCI Device Passthrough" -- this is especially true for the NIC
# application functionality.
#
# Global configuration settings.
#
[global]
rss_glb_config_mode = basicvirtual
rss_glb_config_options = tnlmapen,hashtoeplitz,tnlalllkp
# PL_TIMEOUT register
pl_timeout_value = 10000 # the timeout value in units of us
# The following Scatter Gather Engine (SGE) settings assume a 4KB Host
# Page Size and a 64B L1 Cache Line Size. It programs the
# EgrStatusPageSize and IngPadBoundary to 64B and the PktShift to 2.
# If a Master PF Driver finds itself on a machine with different
# parameters, then the Master PF Driver is responsible for initializing
# these parameters to appropriate values.
#
# Notes:
# 1. The Free List Buffer Sizes below are raw and the firmware will
# round them up to the Ingress Padding Boundary.
# 2. The SGE Timer Values below are expressed below in microseconds.
# The firmware will convert these values to Core Clock Ticks when
# it processes the configuration parameters.
#
reg[0x1008] = 0x40810/0x21c70 # SGE_CONTROL
reg[0x100c] = 0x22222222 # SGE_HOST_PAGE_SIZE
reg[0x10a0] = 0x01040810 # SGE_INGRESS_RX_THRESHOLD
reg[0x1044] = 4096 # SGE_FL_BUFFER_SIZE0
reg[0x1048] = 65536 # SGE_FL_BUFFER_SIZE1
reg[0x104c] = 1536 # SGE_FL_BUFFER_SIZE2
reg[0x1050] = 9024 # SGE_FL_BUFFER_SIZE3
reg[0x1054] = 9216 # SGE_FL_BUFFER_SIZE4
reg[0x1058] = 2048 # SGE_FL_BUFFER_SIZE5
reg[0x105c] = 128 # SGE_FL_BUFFER_SIZE6
reg[0x1060] = 8192 # SGE_FL_BUFFER_SIZE7
reg[0x1064] = 16384 # SGE_FL_BUFFER_SIZE8
reg[0x10a4] = 0x00280000/0x3ffc0000 # SGE_DBFIFO_STATUS
reg[0x1118] = 0x00002800/0x00003c00 # SGE_DBFIFO_STATUS2
reg[0x10a8] = 0x402000/0x402000 # SGE_DOORBELL_CONTROL
# SGE_THROTTLE_CONTROL
bar2throttlecount = 500 # bar2throttlecount in us
sge_timer_value = 5, 10, 20, 50, 100, 200 # SGE_TIMER_VALUE* in usecs
reg[0x1124] = 0x00000400/0x00000400 # SGE_CONTROL2, enable VFIFO; if
# SGE_VFIFO_SIZE is not set, then
# firmware will set it up in function
# of number of egress queues used
reg[0x1130] = 0x00d5ffeb # SGE_DBP_FETCH_THRESHOLD, fetch
# threshold set to queue depth
# minus 128-entries for FL and HP
# queues, and 0xfff for LP which
# prompts the firmware to set it up
# in function of egress queues
# used
reg[0x113c] = 0x0002ffc0 # SGE_VFIFO_SIZE, set to 0x2ffc0 which
# prompts the firmware to set it up in
# function of number of egress queues
# used
# enable TP_OUT_CONFIG.IPIDSPLITMODE
reg[0x7d04] = 0x00010000/0x00010000
# disable TP_PARA_REG3.RxFragEn
reg[0x7d6c] = 0x00000000/0x00007000
# enable TP_PARA_REG6.EnableCSnd
reg[0x7d78] = 0x00000400/0x00000000
reg[0x7dc0] = 0x0e2f8849 # TP_SHIFT_CNT
# TP_VLAN_PRI_MAP to select filter tuples and enable ServerSram
# filter control: compact, fcoemask
# server sram : srvrsram
# filter tuples : fragmentation, mpshittype, macmatch, ethertype,
# protocol, tos, vlan, vnic_id, port, fcoe
# valid filterModes are described the Terminator 5 Data Book
filterMode = fcoemask, srvrsram, fragmentation, mpshittype, protocol, vlan, port, fcoe
# filter tuples enforced in LE active region (equal to or subset of filterMode)
filterMask = protocol, fcoe
# Percentage of dynamic memory (in either the EDRAM or external MEM)
# to use for TP RX payload
tp_pmrx = 30
# TP RX payload page size
tp_pmrx_pagesize = 64K
# TP number of RX channels
tp_nrxch = 0 # 0 (auto) = 1
# Percentage of dynamic memory (in either the EDRAM or external MEM)
# to use for TP TX payload
tp_pmtx = 50
# TP TX payload page size
tp_pmtx_pagesize = 64K
# TP number of TX channels
tp_ntxch = 0 # 0 (auto) = equal number of ports
# TP OFLD MTUs
tp_mtus = 88, 256, 512, 576, 808, 1024, 1280, 1488, 1500, 2002, 2048, 4096, 4352, 8192, 9000, 9600
# TP_GLOBAL_CONFIG
reg[0x7d08] = 0x00000800/0x00000800 # set IssFromCplEnable
# TP_PC_CONFIG
reg[0x7d48] = 0x00000000/0x00000400 # clear EnableFLMError
# TP_PARA_REG0
reg[0x7d60] = 0x06000000/0x07000000 # set InitCWND to 6
# ULPRX iSCSI Page Sizes
reg[0x19168] = 0x04020100 # 64K, 16K, 8K and 4K
# LE_DB_CONFIG
reg[0x19c04] = 0x00400000/0x00400000 # LE Server SRAM Enable
# MC configuration
mc_mode_brc[0] = 1 # mc0 - 1: enable BRC, 0: enable RBC
mc_mode_brc[1] = 1 # mc1 - 1: enable BRC, 0: enable RBC
# ULP_TX_CONFIG
reg[0x8dc0] = 0x00000004/0x00000004 # Enable more error msg for ...
# TPT error.
# Some "definitions" to make the rest of this a bit more readable. We support
# 4 ports, 3 functions (NIC, FCoE and iSCSI), scaling up to 8 "CPU Queue Sets"
# per function per port ...
#
# NMSIX = 1088 # available MSI-X Vectors
# NVI = 128 # available Virtual Interfaces
# NMPSTCAM = 336 # MPS TCAM entries
#
# NPORTS = 4 # ports
# NCPUS = 8 # CPUs we want to support scalably
# NFUNCS = 3 # functions per port (NIC, FCoE, iSCSI)
# Breakdown of Virtual Interface/Queue/Interrupt resources for the "Unified
# PF" which many OS Drivers will use to manage most or all functions.
#
# Each Ingress Queue can use one MSI-X interrupt but some Ingress Queues can
# use Forwarded Interrupt Ingress Queues. For these latter, an Ingress Queue
# would be created and the Queue ID of a Forwarded Interrupt Ingress Queue
# will be specified as the "Ingress Queue Asynchronous Destination Index."
# Thus, the number of MSI-X Vectors assigned to the Unified PF will be less
# than or equal to the number of Ingress Queues ...
#
# NVI_NIC = 4 # NIC access to NPORTS
# NFLIQ_NIC = 32 # NIC Ingress Queues with Free Lists
# NETHCTRL_NIC = 32 # NIC Ethernet Control/TX Queues
# NEQ_NIC = 64 # NIC Egress Queues (FL, ETHCTRL/TX)
# NMPSTCAM_NIC = 16 # NIC MPS TCAM Entries (NPORTS*4)
# NMSIX_NIC = 32 # NIC MSI-X Interrupt Vectors (FLIQ)
#
# NVI_OFLD = 0 # Offload uses NIC function to access ports
# NFLIQ_OFLD = 16 # Offload Ingress Queues with Free Lists
# NETHCTRL_OFLD = 0 # Offload Ethernet Control/TX Queues
# NEQ_OFLD = 16 # Offload Egress Queues (FL)
# NMPSTCAM_OFLD = 0 # Offload MPS TCAM Entries (uses NIC's)
# NMSIX_OFLD = 16 # Offload MSI-X Interrupt Vectors (FLIQ)
#
# NVI_RDMA = 0 # RDMA uses NIC function to access ports
# NFLIQ_RDMA = 4 # RDMA Ingress Queues with Free Lists
# NETHCTRL_RDMA = 0 # RDMA Ethernet Control/TX Queues
# NEQ_RDMA = 4 # RDMA Egress Queues (FL)
# NMPSTCAM_RDMA = 0 # RDMA MPS TCAM Entries (uses NIC's)
# NMSIX_RDMA = 4 # RDMA MSI-X Interrupt Vectors (FLIQ)
#
# NEQ_WD = 128 # Wire Direct TX Queues and FLs
# NETHCTRL_WD = 64 # Wire Direct TX Queues
# NFLIQ_WD = 64 ` # Wire Direct Ingress Queues with Free Lists
#
# NVI_ISCSI = 4 # ISCSI access to NPORTS
# NFLIQ_ISCSI = 4 # ISCSI Ingress Queues with Free Lists
# NETHCTRL_ISCSI = 0 # ISCSI Ethernet Control/TX Queues
# NEQ_ISCSI = 4 # ISCSI Egress Queues (FL)
# NMPSTCAM_ISCSI = 4 # ISCSI MPS TCAM Entries (NPORTS)
# NMSIX_ISCSI = 4 # ISCSI MSI-X Interrupt Vectors (FLIQ)
#
# NVI_FCOE = 4 # FCOE access to NPORTS
# NFLIQ_FCOE = 34 # FCOE Ingress Queues with Free Lists
# NETHCTRL_FCOE = 32 # FCOE Ethernet Control/TX Queues
# NEQ_FCOE = 66 # FCOE Egress Queues (FL)
# NMPSTCAM_FCOE = 32 # FCOE MPS TCAM Entries (NPORTS)
# NMSIX_FCOE = 34 # FCOE MSI-X Interrupt Vectors (FLIQ)
# Two extra Ingress Queues per function for Firmware Events and Forwarded
# Interrupts, and two extra interrupts per function for Firmware Events (or a
# Forwarded Interrupt Queue) and General Interrupts per function.
#
# NFLIQ_EXTRA = 6 # "extra" Ingress Queues 2*NFUNCS (Firmware and
# # Forwarded Interrupts
# NMSIX_EXTRA = 6 # extra interrupts 2*NFUNCS (Firmware and
# # General Interrupts
# Microsoft HyperV resources. The HyperV Virtual Ingress Queues will have
# their interrupts forwarded to another set of Forwarded Interrupt Queues.
#
# NVI_HYPERV = 16 # VMs we want to support
# NVIIQ_HYPERV = 2 # Virtual Ingress Queues with Free Lists per VM
# NFLIQ_HYPERV = 40 # VIQs + NCPUS Forwarded Interrupt Queues
# NEQ_HYPERV = 32 # VIQs Free Lists
# NMPSTCAM_HYPERV = 16 # MPS TCAM Entries (NVI_HYPERV)
# NMSIX_HYPERV = 8 # NCPUS Forwarded Interrupt Queues
# Adding all of the above Unified PF resource needs together: (NIC + OFLD +
# RDMA + ISCSI + FCOE + EXTRA + HYPERV)
#
# NVI_UNIFIED = 28
# NFLIQ_UNIFIED = 106
# NETHCTRL_UNIFIED = 32
# NEQ_UNIFIED = 124
# NMPSTCAM_UNIFIED = 40
#
# The sum of all the MSI-X resources above is 74 MSI-X Vectors but we'll round
# that up to 128 to make sure the Unified PF doesn't run out of resources.
#
# NMSIX_UNIFIED = 128
#
# The Storage PFs could need up to NPORTS*NCPUS + NMSIX_EXTRA MSI-X Vectors
# which is 34 but they're probably safe with 32.
#
# NMSIX_STORAGE = 32
# Note: The UnifiedPF is PF4 which doesn't have any Virtual Functions
# associated with it. Thus, the MSI-X Vector allocations we give to the
# UnifiedPF aren't inherited by any Virtual Functions. As a result we can
# provision many more Virtual Functions than we can if the UnifiedPF were
# one of PF0-3.
#
# All of the below PCI-E parameters are actually stored in various *_init.txt
# files. We include them below essentially as comments.
#
# For PF0-3 we assign 8 vectors each for NIC Ingress Queues of the associated
# ports 0-3.
#
# For PF4, the Unified PF, we give it an MSI-X Table Size as outlined above.
#
# For PF5-6 we assign enough MSI-X Vectors to support FCoE and iSCSI
# storage applications across all four possible ports.
#
# Additionally, since the UnifiedPF isn't one of the per-port Physical
# Functions, we give the UnifiedPF and the PF0-3 Physical Functions
# different PCI Device IDs which will allow Unified and Per-Port Drivers
# to directly select the type of Physical Function to which they wish to be
# attached.
#
# Note that the actual values used for the PCI-E Intelectual Property will be
# 1 less than those below since that's the way it "counts" things. For
# readability, we use the number we actually mean ...
#
# PF0_INT = 8 # NCPUS
# PF1_INT = 8 # NCPUS
# PF2_INT = 8 # NCPUS
# PF3_INT = 8 # NCPUS
# PF0_3_INT = 32 # PF0_INT + PF1_INT + PF2_INT + PF3_INT
#
# PF4_INT = 128 # NMSIX_UNIFIED
# PF5_INT = 32 # NMSIX_STORAGE
# PF6_INT = 32 # NMSIX_STORAGE
# PF7_INT = 0 # Nothing Assigned
# PF4_7_INT = 192 # PF4_INT + PF5_INT + PF6_INT + PF7_INT
#
# PF0_7_INT = 224 # PF0_3_INT + PF4_7_INT
#
# With the above we can get 17 VFs/PF0-3 (limited by 336 MPS TCAM entries)
# but we'll lower that to 16 to make our total 64 and a nice power of 2 ...
#
# NVF = 16
# For those OSes which manage different ports on different PFs, we need
# only enough resources to support a single port's NIC application functions
# on PF0-3. The below assumes that we're only doing NIC with NCPUS "Queue
# Sets" for ports 0-3. The FCoE and iSCSI functions for such OSes will be
# managed on the "storage PFs" (see below).
#
[function "0"]
nvf = 16 # NVF on this function
wx_caps = all # write/execute permissions for all commands
r_caps = all # read permissions for all commands
nvi = 1 # 1 port
niqflint = 8 # NCPUS "Queue Sets"
nethctrl = 8 # NCPUS "Queue Sets"
neq = 16 # niqflint + nethctrl Egress Queues
nexactf = 8 # number of exact MPSTCAM MAC filters
cmask = all # access to all channels
pmask = 0x1 # access to only one port
[function "1"]
nvf = 16 # NVF on this function
wx_caps = all # write/execute permissions for all commands
r_caps = all # read permissions for all commands
nvi = 1 # 1 port
niqflint = 8 # NCPUS "Queue Sets"
nethctrl = 8 # NCPUS "Queue Sets"
neq = 16 # niqflint + nethctrl Egress Queues
nexactf = 8 # number of exact MPSTCAM MAC filters
cmask = all # access to all channels
pmask = 0x2 # access to only one port
[function "2"]
nvf = 16 # NVF on this function
wx_caps = all # write/execute permissions for all commands
r_caps = all # read permissions for all commands
nvi = 1 # 1 port
niqflint = 8 # NCPUS "Queue Sets"
nethctrl = 8 # NCPUS "Queue Sets"
neq = 16 # niqflint + nethctrl Egress Queues
nexactf = 8 # number of exact MPSTCAM MAC filters
cmask = all # access to all channels
pmask = 0x4 # access to only one port
[function "3"]
nvf = 16 # NVF on this function
wx_caps = all # write/execute permissions for all commands
r_caps = all # read permissions for all commands
nvi = 1 # 1 port
niqflint = 8 # NCPUS "Queue Sets"
nethctrl = 8 # NCPUS "Queue Sets"
neq = 16 # niqflint + nethctrl Egress Queues
nexactf = 8 # number of exact MPSTCAM MAC filters
cmask = all # access to all channels
pmask = 0x8 # access to only one port
# Some OS Drivers manage all application functions for all ports via PF4.
# Thus we need to provide a large number of resources here. For Egress
# Queues we need to account for both TX Queues as well as Free List Queues
# (because the host is responsible for producing Free List Buffers for the
# hardware to consume).
#
[function "4"]
wx_caps = all # write/execute permissions for all commands
r_caps = all # read permissions for all commands
nvi = 28 # NVI_UNIFIED
niqflint = 170 # NFLIQ_UNIFIED + NLFIQ_WD
nethctrl = 100 # NETHCTRL_UNIFIED + NETHCTRL_WD
neq = 256 # NEQ_UNIFIED + NEQ_WD
nqpcq = 12288
nexactf = 40 # NMPSTCAM_UNIFIED
cmask = all # access to all channels
pmask = all # access to all four ports ...
nethofld = 1024 # number of user mode ethernet flow contexts
nroute = 32 # number of routing region entries
nclip = 32 # number of clip region entries
nfilter = 496 # number of filter region entries
nserver = 496 # number of server region entries
nhash = 12288 # number of hash region entries
protocol = nic_vm, ofld, rddp, rdmac, iscsi_initiator_pdu, iscsi_target_pdu, iscsi_t10dif, nic_hashfilter
tp_l2t = 3072
tp_ddp = 2
tp_ddp_iscsi = 2
tp_stag = 2
tp_pbl = 5
tp_rq = 7
# We have FCoE and iSCSI storage functions on PF5 and PF6 each of which may
# need to have Virtual Interfaces on each of the four ports with up to NCPUS
# "Queue Sets" each.
#
[function "5"]
wx_caps = all # write/execute permissions for all commands
r_caps = all # read permissions for all commands
nvi = 4 # NPORTS
niqflint = 34 # NPORTS*NCPUS + NMSIX_EXTRA
nethctrl = 32 # NPORTS*NCPUS
neq = 64 # NPORTS*NCPUS * 2 (FL, ETHCTRL/TX)
nexactf = 16 # (NPORTS *(no of snmc grp + 1 hw mac) + 1 anmc grp)) rounded to 16.
cmask = all # access to all channels
pmask = all # access to all four ports ...
nserver = 16
nhash = 2048
tp_l2t = 1020
protocol = iscsi_initiator_fofld
tp_ddp_iscsi = 2
iscsi_ntask = 2048
iscsi_nsess = 2048
iscsi_nconn_per_session = 1
iscsi_ninitiator_instance = 64
[function "6"]
wx_caps = all # write/execute permissions for all commands
r_caps = all # read permissions for all commands
nvi = 4 # NPORTS
niqflint = 34 # NPORTS*NCPUS + NMSIX_EXTRA
nethctrl = 32 # NPORTS*NCPUS
neq = 66 # NPORTS*NCPUS * 2 (FL, ETHCTRL/TX) + 2 (EXTRA)
nexactf = 32 # NPORTS + adding 28 exact entries for FCoE
# which is OK since < MIN(SUM PF0..3, PF4)
# and we never load PF0..3 and PF4 concurrently
cmask = all # access to all channels
pmask = all # access to all four ports ...
nhash = 2048
tp_l2t = 4
protocol = fcoe_initiator
tp_ddp = 2
fcoe_nfcf = 16
fcoe_nvnp = 32
fcoe_nssn = 1024
# The following function, 1023, is not an actual PCIE function but is used to
# configure and reserve firmware internal resources that come from the global
# resource pool.
#
[function "1023"]
wx_caps = all # write/execute permissions for all commands
r_caps = all # read permissions for all commands
nvi = 4 # NVI_UNIFIED
cmask = all # access to all channels
pmask = all # access to all four ports ...
nexactf = 8 # NPORTS + DCBX +
nfilter = 16 # number of filter region entries
# For Virtual functions, we only allow NIC functionality and we only allow
# access to one port (1 << PF). Note that because of limitations in the
# Scatter Gather Engine (SGE) hardware which checks writes to VF KDOORBELL
# and GTS registers, the number of Ingress and Egress Queues must be a power
# of 2.
#
[function "0/*"] # NVF
wx_caps = 0x82 # DMAQ | VF
r_caps = 0x86 # DMAQ | VF | PORT
nvi = 1 # 1 port
niqflint = 6 # 2 "Queue Sets" + NXIQ
nethctrl = 4 # 2 "Queue Sets"
neq = 8 # 2 "Queue Sets" * 2
nexactf = 4
cmask = all # access to all channels
pmask = 0x1 # access to only one port ...
[function "1/*"] # NVF
wx_caps = 0x82 # DMAQ | VF
r_caps = 0x86 # DMAQ | VF | PORT
nvi = 1 # 1 port
niqflint = 6 # 2 "Queue Sets" + NXIQ
nethctrl = 4 # 2 "Queue Sets"
neq = 8 # 2 "Queue Sets" * 2
nexactf = 4
cmask = all # access to all channels
pmask = 0x2 # access to only one port ...
[function "2/*"] # NVF
wx_caps = 0x82 # DMAQ | VF
r_caps = 0x86 # DMAQ | VF | PORT
nvi = 1 # 1 port
niqflint = 6 # 2 "Queue Sets" + NXIQ
nethctrl = 4 # 2 "Queue Sets"
neq = 8 # 2 "Queue Sets" * 2
nexactf = 4
cmask = all # access to all channels
pmask = 0x4 # access to only one port ...
[function "3/*"] # NVF
wx_caps = 0x82 # DMAQ | VF
r_caps = 0x86 # DMAQ | VF | PORT
nvi = 1 # 1 port
niqflint = 6 # 2 "Queue Sets" + NXIQ
nethctrl = 4 # 2 "Queue Sets"
neq = 8 # 2 "Queue Sets" * 2
nexactf = 4
cmask = all # access to all channels
pmask = 0x8 # access to only one port ...
# MPS features a 196608 bytes ingress buffer that is used for ingress buffering
# for packets from the wire as well as the loopback path of the L2 switch. The
# folling params control how the buffer memory is distributed and the L2 flow
# control settings:
#
# bg_mem: %-age of mem to use for port/buffer group
# lpbk_mem: %-age of port/bg mem to use for loopback
# hwm: high watermark; bytes available when starting to send pause
# frames (in units of 0.1 MTU)
# lwm: low watermark; bytes remaining when sending 'unpause' frame
# (in inuits of 0.1 MTU)
# dwm: minimum delta between high and low watermark (in units of 100
# Bytes)
#
[port "0"]
dcb = ppp, dcbx # configure for DCB PPP and enable DCBX offload
bg_mem = 25
lpbk_mem = 25
hwm = 30
lwm = 15
dwm = 30
dcb_app_tlv[0] = 0x8906, ethertype, 3
dcb_app_tlv[1] = 0x8914, ethertype, 3
dcb_app_tlv[2] = 3260, socketnum, 5
[port "1"]
dcb = ppp, dcbx
bg_mem = 25
lpbk_mem = 25
hwm = 30
lwm = 15
dwm = 30
dcb_app_tlv[0] = 0x8906, ethertype, 3
dcb_app_tlv[1] = 0x8914, ethertype, 3
dcb_app_tlv[2] = 3260, socketnum, 5
[port "2"]
dcb = ppp, dcbx
bg_mem = 25
lpbk_mem = 25
hwm = 30
lwm = 15
dwm = 30
dcb_app_tlv[0] = 0x8906, ethertype, 3
dcb_app_tlv[1] = 0x8914, ethertype, 3
dcb_app_tlv[2] = 3260, socketnum, 5
[port "3"]
dcb = ppp, dcbx
bg_mem = 25
lpbk_mem = 25
hwm = 30
lwm = 15
dwm = 30
dcb_app_tlv[0] = 0x8906, ethertype, 3
dcb_app_tlv[1] = 0x8914, ethertype, 3
dcb_app_tlv[2] = 3260, socketnum, 5
[fini]
version = 0x1425001c
checksum = 0xd8c8fbd6
# Total resources used by above allocations:
# Virtual Interfaces: 104
# Ingress Queues/w Free Lists and Interrupts: 526
# Egress Queues: 702
# MPS TCAM Entries: 336
# MSI-X Vectors: 736
# Virtual Functions: 64
Mini Shell